Shop by Brand: Viking Electronics

- Self diagnostic reports via email (testing com, mic, speaker & switch)
- Automatic polling and programming software included
- 2 Amp relay contacts for door/gate or SL-2 strobe light control
- Blue ôCall Connectedö LED indicator (E-30/E-32-IP only)
- SIP compliant (see pg 2 for list of compatible IP-PBX phone systems)
- PoE powered (class 1, <4 watts)
- Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
- VoIP eliminates the need for ôPush to Talkö mode
- Network downloadable firmware
- T-10 Torx security screws for added security
- Handsfree operation
- Marine grade 316 stainless steel prevents corrosion on the stainless steel models
- Laser etched graphics on stainless steel models
- Programmable to dial up to 5 numbers on busy or ring no answer
- Cycles through backup phone numbers on busy or no-answer
- Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD# 859
- Hangs up on busy signal, time-out or touch tone command
- Remotely programmable
- Extended temperature range (-40¦F to 140¦F)
- 3 different chassis or board only available
- Volume adjustments for microphone and speaker
- E-10-IP and E-30-IP are flush mountable using the included rough-in box or can be surface mounted using an optional VE-5x5 Surface Mount Box (DOD# 424)
- E-32-IP flush mounts in a standard double gang electrical box (not included) or can be surface mounted using an optional VE-5x5 Surface Mount Box (DOD# 424)

Built-in high resolution analog NTSC color video camera with wide viewing angle, tilt/swivel adjustments and wide operating temperature: -40¦F to 140¦F
Built-in 125KHz 26-bit Wiegand proximity card reader with LED and beep card read confirmation and EWP board protection
Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics. Speaker/mic screen. Heavy duty metal keypad buttons and T-10 Security Torx drive mounting screws.
Weather Resistant Features: Marine grade 316 stainless steel faceplate and screws. Keypad internally sealed per IP67. Mylar speaker. Self-draining mic mount. Faceplate, mic and speaker gaskets.
Two sets of SPDT 2 Amp relay contacts for door/gate or camera control
Optional RC-4A for Secure Remote Relay Control, see DOD# 582
Blue ôCall /Statusö LED indicator
SIP compliant (see pg 2 for list of compatible IP-PBX phone systems)
PoE powered (class 2, <6.5 watts)
Automatic Noise Canceling (ANC) feature for operation in noisy environments
VikingÆs proprietary VOX switching eliminates the need for ôPush to Talkö mode
Network downloadable firmware
Programmable to speed dial up to 12 numbers
Cycles to roll over phone number on busy or no-answer
Program up to 1,000 keyless entry codes and/or proximity card numbers
Keyless entry codes and proximity card numbers can be programmed to only allow access at specific times and day of week
Event logging with time and date stamp
Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD# 859
Hangs up on busy signal, time-out or touch tone command
Remotely programmable
Extended temperature range (-40¦F to 140¦F)
Programmable volume adjustments for microphone and speaker
Selectable auto-answer feature for monitoring
Zinc plated steel rough-in box included

EWP products feature foam rubber gaskets and boots, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards
Built-in high resolution analog NTSC color video camera with wide viewing angle, tilt/swivel adjustments and wide operating temperature: -40¦F to 140¦F
Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics. Speaker/mic screen. Heavy duty metal keypad buttons and T-10 Security Torx drive mounting screws.
Weather Resistant Features: Marine grade 316 stainless steel faceplate and screws. Keypad internally sealed per IP67. Mylar speaker. Self-draining mic mount. Faceplate, mic and speaker gaskets.
Two sets of SPDT 2 Amp relay contacts for door/gate or camera control
Optional RC-4A for Secure Remote Relay Control, see DOD# 582
Blue ôCall /Statusö LED indicator
SIP compliant (see pg 2 for list of compatible IP-PBX phone systems)
PoE powered (class 2, <6.5 watts)
Automatic Noise Canceling (ANC) feature for operation in noisy environments
VikingÆs proprietary VOX switching eliminates the need for ôPush to Talkö mode
Network downloadable firmware
26 Bit Wiegand input for optional proximity card readers, see DOD# 221 & 228
Programmable to speed dial up to 12 numbers
Cycles to roll over phone number on busy or no-answer
Program up to 1,000 keyless entry codes and/or proximity card numbers
Keyless entry codes and proximity card numbers can be programmed to only allow access at specific times and day of week
Event logging with time and date stamp
Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD# 859
Hangs up on busy signal, time-out or touch tone command
Remotely programmable
Extended temperature range (-40¦F to 140¦F)
Programmable volume adjustments for microphone and speaker
Selectable auto-answer feature for monitoring
Zinc plated steel rough-in box included

Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics. Speaker/mic screen. Heavy duty metal keypad buttons and T-10 Security Torx drive mounting screws.
Weather Resistant Features: Marine grade 316 stainless steel faceplate and screws. Keypad internally sealed per IP67. Mylar speaker. Self-draining mic mount. Faceplate, mic and speaker gaskets.
Two sets of SPDT 2 Amp relay contacts for door/gate or camera control
Optional RC-4A for Secure Remote Relay Control, see DOD# 582
Blue ôCall /Statusö LED indicator
SIP compliant (see pg 2 for list of compatible IP-PBX phone systems)
PoE powered (class 2, <6.5 watts)
Automatic Noise Canceling (ANC) feature for operation in noisy environments
VikingÆs proprietary VOX switching eliminates the need for ôPush to Talkö mode
Network downloadable firmware
26 Bit Wiegand input for optional proximity card readers, see DOD# 221 & 228
Programmable to speed dial up to 12 numbers
Cycles to roll over phone number on busy or no-answer
Program up to 1,000 keyless entry codes and/or proximity card numbers
Keyless entry codes and proximity card numbers can be programmed to only allow access at specific times and day of week
Event logging with time and date stamp
Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD# 859
Hangs up on busy signal, time-out or touch tone command
Remotely programmable
Extended temperature range (-40¦F to 140¦F)
Programmable volume adjustments for microphone and speaker
Selectable auto-answer feature for monitoring
Zinc plated steel rough-in box included
Optional VE-5x10 Surface Mount Box available, see DOD #424
Optional VE-LIGHT kit to illuminate the front panel at night, see DOD# 428
Self diagnostics (testing: com, mic, speaker, and switch)

Built-in 125KHz 26-bit Wiegand proximity card reader with LED and beep card read confirmation and EWP board protection
Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics. Speaker/mic screen. Heavy duty metal keypad buttons and T-10 Security Torx drive mounting screws.
Weather Resistant Features: Marine grade 316 stainless steel faceplate and screws. Keypad internally sealed per IP67. Mylar speaker. Self-draining mic mount. Faceplate, mic and speaker gaskets.
Two sets of SPDT 2 Amp relay contacts for door/gate or camera control
Optional RC-4A for Secure Remote Relay Control, see DOD# 582
Blue ôCall /Statusö LED indicator
SIP compliant (see pg 2 for list of compatible IP-PBX phone systems)
PoE powered (class 2, <6.5 watts)
Automatic Noise Canceling (ANC) feature for operation in noisy environments
VikingÆs proprietary VOX switching eliminates the need for ôPush to Talkö mode
Network downloadable firmware
Programmable to speed dial up to 12 numbers
Cycles to roll over phone number on busy or no-answer
Program up to 1,000 keyless entry codes and/or proximity card numbers
Keyless entry codes and proximity card numbers can be programmed to only allow access at specific times and day of week
Event logging with time and date stamp
Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD# 859
Hangs up on busy signal, time-out or touch tone command
Remotely programmable
Extended temperature range (-40¦F to 140¦F)
Programmable volume adjustments for microphone and speaker
Selectable auto-answer feature for monitoring
Zinc plated steel rough-in box included

ADA Compliant VoIP Emergency Phone with Built-In Dialer and Digital Voice Announcer
Can be programmed to automatically deliver a digital announcement to identify the location of the emergency call. Alternatively, a DTMF Touch Tone code may also be delivered. A Call Connected LED can be initiated manually or automatically.
PoE powered
Dial up to 5 programmable emergency numbers
2 Amp relay contacts for door/gate or SL-2 strobe light control
SIP compatible
Automatic Noise Canceling feature for proper operation in noisy environments
Grade 2 Braille label for the visually impaired

Self diagnostic reports via email (testing com, mic, speaker & switch)
Automatic polling and programming software included
2 Amp relay contacts for door/gate or SL-2 strobe light control
SIP compatible (see pg 2 for list of compatible IP-PBX phone systems)
PoE powered (class 1, <4 watts)
Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
Network downloadable firmware
Meets ADA requirements for Emergency Phones:
- Automatically lights the ôCall Connected" LED
- Transmits a unique location I.D. code or voice announcement
- Grade 2 Braille label for the visually impaired
Non-volatile digital voice announcer with 28 seconds of voice memory
Handsfree operation
Marine grade 316 stainless steel prevents corrosion on the stainless steel models
Dials up to 5 emergency numbers
E-1600-20-IP and E-1600-52-IP dial up to 5 non-emergency ôINFOö numbers
Cycles through backup phone numbers on busy or no-answer
Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating
Hangs up on busy signal, time-out or touch tone command
Remotely programmable
Extended temperature range (-15¦F to 130¦F)
11 different chassis or board only available

Self diagnostic reports via email (testing com, mic, speaker & switch)
Automatic polling and programming software included
2 Amp relay contacts for door/gate or SL-2 strobe light control
SIP compatible (see pg 2 for list of compatible IP-PBX phone systems)
PoE powered (class 1, <4 watts)
Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
Network downloadable firmware
Meets ADA requirements for Emergency Phones:
- Automatically lights the ôCall Connected" LED
- Transmits a unique location I.D. code or voice announcement
- Grade 2 Braille label for the visually impaired
Non-volatile digital voice announcer with 28 seconds of voice memory
Handsfree operation
Marine grade 316 stainless steel prevents corrosion on the stainless steel models
Dials up to 5 emergency numbers
E-1600-20-IP and E-1600-52-IP dial up to 5 non-emergency ôINFOö numbers
Cycles through backup phone numbers on busy or no-answer
Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating
Hangs up on busy signal, time-out or touch tone command
Remotely programmable
Extended temperature range (-15¦F to 130¦F)
11 different chassis or board only available

- Self diagnostic reports via email (testing com, mic, speaker & switch)
- Automatic polling and programming software included
- 2 amp relay contacts for door/gate or SL-2 strobe light control
- SIP compatible
- PoE powered (class 1, <4 watts)
- Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
- VoIP eliminates the need for

- Self diagnostic reports via email (testing com, mic, speaker & switch)
- Automatic polling and programming software included
- 2 Amp relay contacts for door/gate or SL-2 strobe light control
- Blue ôCall Connectedö LED indicator
- SIP compatible
- PoE powered (class 1, <4 watts)
- Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
- Network downloadable firmware
- Handsfree operation
- Marine grade 316 stainless steel prevents corrosion on the stainless steel models
- Programmable to dial up to 5 numbers on busy or ring no answer
- Cycles through backup phone numbers on busy or no-answer
- Hangs up on busy signal, time-out or touch tone command
- Remotely programmable
- Extended temperature range (-15¦F to 130¦F)
- 3 different chassis or board only available
- Volume adjustments for microphone and speaker
- Flush mountable using the included roughin box or can be surface mounted using an optional VE-5x5 Surface Mount Box

- Self diagnostic reports via email (testing com, mic, speaker & switch)
- Automatic polling and programming software included
- 2 amp relay contacts for door/gate or SL-2 strobe light control
- Blue

- Self diagnostic reports via email (testing com, mic, speaker & switch)
- Automatic polling and programming software included
- 2 amp relay contacts for door/gate or SL-2 strobe light control
- SIP compatible
- PoE powered (class 1, <4 watts)
- Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
- VoIP eliminates the need for

Vandal Resistant Features:14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphicsStainless steel ôCallö buttonHeavy duty metal keypadT-10 Torx security mounting screwsWeather Resistant Features:Enhanced Weather Protection designed to meet IP66 Ingress Protection Rating (see DOD 859)Marine grade 316 stainless steel faceplate, screws and push button switchSwitch internally sealed per IP67Mylar speakerSelf-draining mic mountFaceplate, mic and speaker gasketsTwo sets of SPDT 2 Amp relay contacts for door / gate or camera controlSecure Remote Relay Control using Viking RC-4A (DOD 585)Blue ôCall / Statusö LED indicatorSIP compliant (see Product Manual for list of compatible IP-PBX phone systems)PoE powered (class 2, <6.5 Watts)Automatic Noise Canceling (ANC) feature for proper operation in noisy environmentsVoIP audio detection eliminates the need for ôPush to Talkö mode26 Bit Wiegand input for adding a Viking proximity card reader26 Bit Wiegand output can connect to card reader input of an Access Control SystemProgrammable to speed dial up to 250 numbersCycles to roll over phone number on busy or ring-no-answerProgram up to 1,000 keyless entry codesProgram up to 1,000 proximity card numbersKeyless entry codes and proximity card numbers can be programmed to only allow access at specific times and day of weekCall logging with time and date stampHangs up on busy signal, time-out or touch tone commandExtended temperature range (-40¦F to 140¦F)Volume adjustments for microphone and speakerSelectable auto-answer feature for monitoringRemotely programmableNetwork downloadable firmwareSelf diagnostics for testing com, mic, speaker, and switchZinc plated steel rough-in box with (2) 0.75? conduit knockouts includedFlush mount using the included rough-in box or surface mount using a Viking VE-6+7 Surface Mount Box (DOD 424)

- Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics
-Heavy duty metal keypad and ôCallö button
-Scratch resistant powder coating (K-1700-BN-IP). T-10 Security Torx drive mounting screws
-Weather Resistant Features: Marine grade 316 stainless steel faceplate, screws and push button switch
-Switch internally sealed per IP67
-Weather resistant powder paint (K-1700-BN-IP)
-Available in 2 standard finishes: 316 brushed stainless steel with laser etched graphics or oil rubbed bronze powder paint with copper metallic graphics
-Two sets of SPDT 2 Amp relay contacts for door/gate or camera control
-Optional RC-4A for Secure Remote Relay Control, see DOD 582
-Blue ôCall /Statusö LED indicator
-SIP compliant (see page 2 for list of compatible IP-PBX phone systems)
-PoE powered (class 2, <6.5 watts)
-Automatic Noise Canceling (ANC) feature for operation in noisy environments
-VikingÆs proprietary VOX switching

EWP products feature foam rubber gaskets and boots, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards with internally sealed, field-adjustable trim pots and DIP switches for easy on-site programming
Self diagnostic reports via email (testing com, mic, speaker, and switch)
Automatic polling and programming software included
SIP compatible (see page 2 for list of compatible IP-PBX phone systems)
PoE powered (class 1, <4 watts)
Automatic Noise Canceling (ANC) for operation in noisy environments
VoIP eliminates the need for ôPush to Talkö mode
Network downloadable firmware
Meets ADA requirements for Emergency Phones:
- Automatically lights the ôCall Connectedö LED
- Transmits a location I.D. or voice announcement
- Grade 2 Braille label for the visually impaired
Non-volatile digital voice announcer with 28 seconds of voice memory
Handsfree operation
Marine grade 316 stainless steel prevents faceplate / push button corrosion
Dials up to 5 emergency numbers
E-1600BLT2IPEWP and E-1600AST2IPEWP can also dial up to 5 additional non-emergency ôINFOö numbers
Cycles through backup phone numbers on busy or no-answer
Comes standard with Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD# 859
Hangs up on busy signal, time-out or touch tone command
Remotely programmable
Extended temperature range (-40¦F to 140¦F)

- Vandal Resistant Features:
- 12 gauge (0.105" thick) 316 stainless steel faceplate
- Permanent laser etched graphics
- Heavy duty metal hook switch
- Heavy duty metal keypad
- Armored cable with internal stainless steel lanyard
- T-10 Security Torx drive mounting screws
- Weather Resistant Features:
- Marine grade 316 stainless steel faceplate
- Marine grade 316 stainless steel Torx security screws
- Internally sealed keypad
- Faceplate gasket (on EWP models)
- Ring with adjustable volume and cadence
- Hearing aid compatible amplified handset with sealed push button volume control
- Two sets of SPDT 2 Amp relay contacts for door/gate or camera control
- Optional RC-4A for Secure Remote Relay Control
- SIP compliant
- PoE powered (class 1, <4 Watts)
- Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging
- Network downloadable firmware
- 12ö armored handset cable with internal stainless steel lanyard for added strength
- Programmable to speed dial up to 250 numbers
- 26 Bit Wiegand input for optional proximity card readers
- 26 Bit Wiegand output connect to card reader input of an Access Control System
- Cycles to rollover phone number on busy or no-answer
- Program up to 1,000 keyless entry codes¡¡¡ and/or proximity card numbers
- Keyless entry codes and proximity card numbers can be programmed to only allow access at specific times and day of week
- Event logging with time and date stamp
- Remotely programmable
- Extended temperature range (-40¦F to 140¦F)
- Flush mount with the included zinc plated steel rough-in box
- Surface mount with an optional VE-5+10 Surface Mount Box (not included)
- Optional VE-LIGHT kit to illuminate the front panel at night
- Diagnostics (for testing relay)

- Vandal Resistant Features:
- 12 gauge 316 stainless steel front panel
- Permanent laser etched graphics
- Heavy duty metal hook switch
- Armored cable with internal stainless steel lanyard
- T-10 Security Torx drive mounting screws
- Weather Resistant Features:
- Marine grade 316 stainless steel faceplate
- Marine grade 316 stainless steel Torx security screws
- Equipped with Enhanced Weather Protection (EWP)
- Faceplate, ear piece, and mouth piece gaskets (on EWP models)
- Ring with adjustable volume and cadence
- Hearing aid compatible amplified handset with sealed push button volume control
- SPDT 2 Amp relay contacts for door/gate or camera control
- Optional RC-4A for Secure Remote Relay Control, see DOD 582
- SIP compliant
- PoE powered (class 1, <4 Watts)
- Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging
- Network downloadable firmware
- 12ö armored handset cable with internal stainless steel lanyard for added strength
- Cycles to up to three rollover phone numbers on busy or no-answer
- Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859
- Remotely programmable
- Extended temperature range (-40¦F to 140¦F)
- Selectable auto-answer feature for monitoring
- Flush mount using a standard double-gang box (not included)
- Surface mount using an optional VE-5+10 surface mount box (not included, see DOD 424)
- Optional VE-LIGHT kit to illuminate the front panel at night, see DOD 428
- Diagnostics (for testing relay)

- Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics. Speaker/mic screen. Heavy duty metal keypad and ôCallö button. Scratch resistant powder coating (K-1770-BN-IP). T-10 Security Torx drive mounting screws.
- Weather Resistant Features: Marine grade 316 stainless steel faceplate, screws and push button switch. Switch internally sealed per IP67. Mylar speaker. Selfdraining mic mount. Faceplate, mic and speaker gaskets. Weather resistant powder paint (K-1770-BN-IP)
- Available in 2 standard finishes: 316 brushed stainless steel with laser etched graphics or oil rubbed bronze powder paint with copper metallic graphics
- Built-in 125KHz 26-bit Wiegand proximity card reader with LED and beep card read confirmation and EWP board protection
- Two sets of SPDT 2 Amp relay contacts for door/gate or camera control
- Optional RC-4A for Secure Remote Relay Control, see DOD 582
- Blue ôCall /Statusö LED indicator
- SIP compliant (see page 2 for compatible SIP servers and IP phone systems)
- Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging
- PoE powered (class 2, <6.5 watts)
- Automatic Noise Canceling (ANC) feature for operation in noisy environments
- VikingÆs proprietary VOX switching eliminates the need for ôPush to Talkö mode

- Vandal Resistant Features:
- 12 gauge (0.105" thick) 316 stainless steel front panel
- Permanent laser etched graphics
- Heavy duty metal hook switch
- Armored cable with internal stainless steel lanyard
- T-10 Security Torx drive mounting screws
- Weather Resistant Features:
- Marine grade 316 stainless steel faceplate
- Marine grade 316 stainless steel Torx security screws
- Faceplate, ear piece, and mouth piece gaskets (on EWP models)
- Ring with adjustable volume and cadence
- Hearing aid compatible amplified handset with sealed push button volume control
- SPDT 2 Amp relay contacts for door/gate or camera control¡¡¡
- Optional RC-4A for Secure Remote Relay Control, see DOD 582
- SIP compliant
- PoE powered (class 1, <4 Watts)¡¡¡
- Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging
- Network downloadable firmware
- 12ö armored handset cable with internal stainless steel lanyard for added strength
- Cycles to up to three rollover phone numbers on busy or no-answer
- Remotely programmable
- Extended temperature range (-40¦F to 140¦F)
- Selectable auto-answer feature for monitoring
- Flush mount using a standard double-gang box (not included)
- Surface mount using an optional VE-5+10 surface mount box (not included, see DOD 424)
- Optional VE-LIGHT kit to illuminate the front panel at night, see DOD 428
- Diagnostics (for testing relay)

- Vandal Resistant Features: 12 gauge 316 stainless steel faceplate with permanent laser etched graphics. Heavy duty metal keypad, hook switch, armored cable and T-10 security Torx drive mounting screws.
- Weather Resistant Features: Marine grade 316 stainless steel faceplate and Torx security screws. Internally sealed keypad. Faceplate gaskets (on EWP models). Weather resistant powder paint on optional VE-5X10 surface mount box or 316 grade stainless steel on optional VE-5X10-SS surface mount box.
- Ring with adjustable volume and cadence
- Hearing aid compatible amplified handset with sealed push button volume control
- Two sets of SPDT 2 Amp relay contacts for door/gate or camera control
- Optional RC-4A for Secure Remote Relay Control, see DOD 582
- SIP compliant (see page 2 for list of compatible IP-PBX phone systems)
- PoE powered (class 2, <6.5 watts)
- Network downloadable firmware
- 36ö armored handset cable on Standard model, 54ö on EWP model
- Programmable to speed dial up to 250 numbers
- 26 Bit Wiegand input for optional proximity card readers, see DOD 221 and 228
- 26 Bit Wiegand output connect to card reader input of an Access Control System
- Cycles to rollover phone number on busy or no-answer
- Program up to 1,000 keyless entry codes and/or proximity card numbers
- Keyless entry codes and proximity card numbers can be programmed to only allow access at specific times and day of week
- Event logging with time and date stamp
- Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859
- Remotely programmable
- Extended temperature range (-40¦F to 140¦F)
- Zinc plated steel rough-in box included
- Optional VE-5x10 and VE-5X10-SS Surface Mount Boxes, see DOD 424
- Optional VE-LIGHT kit to illuminate the front panel at night, see DOD 428
- Diagnostics (for testing relays)

EWP products feature foam rubber gaskets and boots, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards with internally sealed, field-adjustable trim pots and DIP switches for easy on-site programming
Self diagnostic reports via email (testing com, mic, speaker & switch)
Automatic polling and programming software included
SIP compatible (see pg 2 for list of compatible IP-PBX phone systems)
PoE powered (class 1, <4 watts)
Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
VoIP eliminates the need for ôPush to Talkö mode
Network downloadable firmware
Meets ADA requirements for Emergency Phones:
- Automatically lights the ôCall Connectedö LED
- Transmits a location I.D. or voice announcement
- Grade 2 Braille label for the visually impaired
Non-volatile digital voice announcer with 28 seconds of voice memory
Handsfree operation
Marine grade 316 stainless steel prevents faceplate / push button corrosion
Dials up to 5 emergency numbers
E-1600BLT2IPEWP dials up to 5 additional non-emergency ôINFOö numbers
Cycles through backup phone numbers on busy or no-answer
Comes standard with Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD# 859
Hangs up on busy signal, time-out or touch tone command
Remotely programmable
Extended temperature range (-40¦F to 140¦F)
Optional PB-100 Polling System available (DOD# 232)

Built-in high resolution color video camera with wide viewing angle, tilt/swivel adjustments and wide operating temperature
Audio and video transmission on one CAT5E cable
Vandal Resistant Features: 14 gauge louvered 316 marine grade stainless steel faceplate with permanent laser etched graphics, stainless steel speaker/mic screen, heavy duty metal ôCallö button,scratch resistant powder coating (optional VE- 5x5) and hexdrive mounting screws
Weather Resistant Features: Marine grade 316 stainless steel faceplate, screws and and push button switch. Switch internally sealed per IP67. Mylar speaker. Self-draining mic mount. Faceplate, mic and speaker gaskets. Weather resistant powder paint on optional VE-5x5.
Volume adjustments for microphone and speaker
Blue call progress / night light LED
High output speaker amplifier with volume adjustment POT
20 Hz ring generator (6.0 REN ring load maximum)
Selectable ring cadence (standard, double, short/short/long, or short/long/short)
Selectable number of rings (2, 3, 10 or 30)
Selectable ôPush-to-Talkö feature for noisy environments
W-3005-EWP is designed to meet IP66 Ingress Protection Rating (see DOD# 859 for more information)
Connect to a phone systemÆs unused trunk input, FXO port or a Viking C-1000B Controller

- Viking door answering device
- Answer your door from the safety of your telephone!
- New high output speaker amplifier with volume adjustment POT
- Microphone volume adjustment POT
- 24 volt talk battery
- 20 Hz ring generator (3.0 REN ring load maximum)
- Selectable number of rings (2, 3, 10 or 30)
- Extended operating temperature range: -15¦F to 130¦F
- Compact 45¦ terminal strip for easy wiring
- Enhanced Weather Protection

- 5-inch diameter horn
- 10 Watt power handling
- Compatible with 25V or 70V paging systems
- Adjustable base for easy mounting and directional adjustment
- Compact design for discrete mounting
- Five switch selectable power taps
- High efficiency
- Designed to meet IP53 Ingress Protection rating when mounted with horn pointing downward at least 45 degrees from horizontal

- Designed to meet NEMA/EEMAC Type 4/4X/12 requirements
- Construction: Heavy-duty UV stable polycarbonate / ABS composite with flame-retardant UL 94 V-0 rating
- Comes with internal adapter panel 2
- Drip guard and gasket sealed door
- 0.020ö thick stamped aluminum ôTelephoneö label with scratch resistant UV stable clear coat
- Also available red or yellow models
- Optional VE-SPG door return hinge spring available
- Optional VE-PBL push button lock and key set available

- Heavy-duty 319 cast aluminum construction
- Powder coated for durability and UV stability
- Drip guard and gasket sealed door
- 0.020? thick stamped aluminum ôTelephoneö label with scratch resistant UV stable clear coat
- 0.5? NPT conduit openings on top and bottom
- Mounting holes for a standard RJ11 wall plate
- VE-SPG door return hinge spring available
- VE-PBL push button lock and key set available

- Designed to meet NEMA/EEMAC Type 4/4X/12 requirements
- Construction: Heavy-duty UV stable polycarbonate / ABS composite with flame-retardant UL 94 V-0 rating
- Comes with internal adapter panel 1
- Drip guard and gasket sealed door
- 0.020ö thick stamped aluminum ôTelephoneö label with scratch resistant UV stable clear coat
- Also available red or yellow models
- Includes mounting holes for standard RJ11 wall plate
- Optional VE-SPG door return hinge spring available
- Optional VE-PBL push button lock and key set available

- Designed to meet NEMA/EEMAC Type 4/4X/12 requirements
- Construction: Heavy-duty UV stable polycarbonate / ABS composite with flame-retardant UL 94 V-0 rating
- Comes with internal adapter panel 1
- Drip guard and gasket sealed door
- 0.020ö thick stamped aluminum ôTelephoneö label with scratch resistant UV stable clear coat
- Also available yellow or black models
- Includes mounting holes for standard RJ11 wall plate
- Optional VE-SPG door return hinge spring available
- Optional VE-PBL push button lock and key set available

- Designed to meet NEMA/EEMAC Type 4/4X/12 requirements
- Construction: Heavy-duty UV stable polycarbonate / ABS composite with flame-retardant UL 94 V-0 rating
- Comes with internal adapter panel 2
- Drip guard and gasket sealed door
- 0.020ö thick stamped aluminum ôTelephoneö label with scratch resistant UV stable clear coat
- Also available yellow or black models
- Optional VE-SPG door return hinge spring available
- Optional VE-PBL push button lock and key set available

- Designed to meet NEMA/EEMAC Type 4/4X/12 requirements
- Construction: Heavy-duty UV stable polycarbonate / ABS composite with flame-retardant UL 94 V-0 rating
- Drip guard and gasket sealed door
- Includes a separate 0.020ö thick stamped aluminum ôTelephoneö label with scratch resistant UV stable clear coat
- Also available yellow or black models
- Optional VE-SPG door return hinge spring available
- Optional VE-PBL push button lock and key set available

- Designed to meet NEMA/EEMAC Type 4/4X/12 requirements
- Construction: Heavy-duty UV stable polycarbonate / ABS composite with flame-retardant UL 94 V-0 rating
- Drip guard and gasket sealed door
- Includes a separate 0.020ö thick stamped aluminum ôTelephoneö label with scratch resistant UV stable clear coat
- Also available red or black models
- Optional VE-SPG door return hinge spring available
- Optional VE-PBL push button lock and key set available