Shop by Brand: Viking Electronics

- Up to 14 Schedules and up to 1,000 Events
- 6 minutes of CD quality WAV file record time
- Up to 14 different tones or messages
- 4 programmable trigger inputs for emergency tones, etc.
- Automatic Day Light Savings Time and leap year correction
- Programmable NTP Clock synchronization
- PC programming software included ò RS485 clock SYNC terminals for remote Master Clock control of Viking CL Series RF synchronized clocks
- Non-volatile memory with 4 day clock back up
- Factory loaded with school/factory tones and evacuation signals (ANSI S3.41), etc.
- Remote program via TCP/IP network
- Page trigger outputs (12VDC and DPDT relay)
- Programmable Auxiliary relay contacts (DPDT)
- 24 hour digital clock displays hours & minutes
- One mono line level pre-amp input and audio output
- Built-in 1 watt mono audio amplifier
- One isolated audio output for PABX / dial access paging
- Master volume control
- Programmable volume control per tone/message
- Time base selection: Network, 50/60Hz or internal
- Programmable message repeat count for trigger inputs

- Terminal strip connections for normally open, normally closed, and common for all four relays
- Relays can be toggled or timed closures of from 1 to 99 seconds can be activated
- Terminal strip connections for all four sensor inputs
- Notification by email or text message of sensor input state change
- Can be used as a secure remote relay for Viking VoIP series phones
- Remote Interaction: sensor change on one RC-4A triggers relay activation of a second RC-4A across network
- Ready-to-use webpage control interface
- Encrypted login
- Two levels of access based on login:
- Administrator (full access)
- Guest (programmable limits)
- Relay names, input names and input status can be customized on webpage
- Firmware remotely updatable

Simple on-off toggle switch mounted in a convenient plastic caseUsed with Viking products that have a ôNight Switchö input or any product that requires an external switch closureCompact size, mounts anywhereRugged switch with flat actuatorFoam tape for quick mountingQuick connectors for easy wiring

- Built in volume adjustable ringer
- No dial pad
- Hearing aid compatible amplified handset with volume control
- Available in two colors: red or ash
- Optional VE-9x12 or VE-9x20 weatherproof box

- Built in volume adjustable ringer
- No dial pad
- Hearing aid compatible amplified handset with volume control
- Available in two colors: red or ash
- Optional VE-9x12 or VE-9x20 weatherproof box

- Built in volume adjustable ringer
- No dial pad
- Hearing aid compatible amplified handset with volume control
- Available in two colors: red or ash
- Optional VE-9x12 or VE-9x20 weatherproof box

- Viking silent phone observation unit
- Allows supervisors to silently monitor employee phones without disrupting the activity at their workstation
- 24 station capacity can be expanded to 240 stations at any time
- Compatible with analog PABX/KSU stations
- Monitor stations from an unused phone system line input or to a dedicated single line phone
- Add remote observing with a RAD-AMP Remote Access Device
- Built-in talk assist (dial *)
- Dial up code can be programmed to match the station number
- Cassette recorder output and Touch Tone control
- Automatic gain control equalizes in and outbound conversation levels
- Configurable for digital phones (requires the SO-24 AK and an extra pair of wires to each phone handset)
- One year manufacturer's warranty

VKSO24A

- Two watts of paging power
- All lines are optically coupled for use with fax switches and analog PABX/KSU stations
- Can provide background music from an external source
- Paging from an unused trunk port or paging port
- Four loud ringing sounds:
Electronic warble
Double gong
Quadruple chime
Door chime (ding-dong)
- Provides loud ringing or night bell, from 1-6 lines for warehouses, yards, etc.
- Output for controlling a 12V relay from 1-6 ringing lines
- Page alert tone
- 600ohm output for sourcing high powered amplifiers
- Includes one 25AE 8 ohm paging horn (can support a maximum of 3)

- Adjustable volume control
- Powers up to three 8 ohm speakers
- Screw terminal connections
- Power supply included
- One weather resistant 25AE paging horn included
- Optional additional 25AE paging horns or 30AE ceiling speakers available

- Interfaces in place of a Panasonic KX-T30865 or KX-T7775 doorphone
- Allows use of these Viking entry phones:
- E-10A Flush mount speaker phone
- E-20B Surface mount speaker phone
- E-30 Stainless steel speaker phone
- E-32 Stainless steel double gang box mount
- E-35 Stainless steel video speaker phone
- E-40 Compact door entry phone
- E-50 Compact video door entry phone
- E-60 Double gang entry phone
- E-65 Double gang video entry phone
- E-70 Double gang entry phone with built in prox card reader
- E-75 Double gang video entry phone with built in prox card reader
- All Panasonic doorphone / door station card programming options and features may still be used
- Increased audio performance over PanasonicÆs doorphones
- Provides adjustable ringback tones to entry phone
- Provides CPC signal to entry phone

- Line powered voice phone announcer
- Non-volatile memory (no batteries required)
- Remote recording and programming
- 16 seconds of record time
- Ring trip detection (automatically answers on first ring)
- Programmable message playback counter
- CPC detection for auto disconnect
- Modular connection

VKDVALPA

- Compatible with Windows 95, 98, ME, NT 4.0, 2000 and XP
- Male sub-D 9 pin cable provided 20 digit Touch Tone buffer
- Accepts standard RS-232 ASCII commands
- Dials Touch Tones 0-9, *, # and 2 second pauses
- Audio In jack for playing announcements
- Audio Out jack for recording announcements
- Able to send and receive 1200 baud data
- Analog C.O. line port
- Analog phone port
- Power: 120V AC/12V DC 500mA, UL listed adapter provided
- Dimensions: 127mm x 127mm x 25mm (5

- Viking power fail bypass system
- Makes it possible to receive calls during phone system and power outages
- Connects 6 pre-assigned single line station phones directly to user-assigned CO trunks
- Built in ground start converter permits outbound calls from standard phones
- When system is restored, calls in progress are not lost
- Reconnects phones to their station circuits after they become idle
- Can be configured to operate when power is lost or from an opening/closing of an alarm contact or manual closure
- Can be used to convert six incoming ground start lines to loop start lines
- One year manufacturer's warranty
- Made in the USA

- Applications:
Electronic Key Systems
Paging systems
OPXs
- Provides 48V talk battery
- Provides 90VG ring voltage

- Viking professional telecom recorder kit
- Designed to record both sides of the conversation on a phone line using a standard digital or tape style recorder
- Kit contains an interface module, a seven foot recorder cable with 1/8

- Digital announcer/recorder
- Built in 2 watt amplifier to connect directly to speakers
- Designed to providemusic and promotion on hold by using playback in a continuous loop or alternating between promotions and an auxiliary music source at 2 second to 30 minute intervals
- Any number of multiple messages may be recorded
- Announcer comes with four professionally pre-recorded promotions on hold pacifier messages, as well as, power supply and cabling for an easy plug and play installation
- Output may be connected directly to loudspeakers with messages repeated in timed intervals or played at the push of a button for museum displays, information booths, point of interest locations, etc.
- 7.5 minutes of user recordable memory (select fromuser recorded messages or four pre-recorded on-hold pacifier messages)
- Three playback options:on demand, continuous, and timed intervals
- Non-volatile memory (no batteries required)
- Record from electret mic, carbon handset, tape, CD, PC sound card or any line level device
- 600 ohm audio output for high wattage amplifiers
- Multiple message capabilities (total number of messages only limited to maximum record time)
- AGC (Automatic Gain Control) for trouble free recording
- Auxiliary audio (MOH) input for between message background music
- Remote trigger input for on-demand playback from a remote contact closure
- Press and hold play mode
- Status LED forrecord and playback indication
- Master and auxiliary input volume controls
- I.O. communications port (allows only one DVA-2WA to announce at a time)
- Power: 120V AC/12V DC, 500mA adapter provided
- Dimensions: 133mm x 89mm x 44mm (5.25

- Proximity card reader (for apartment or office entry systems)
- Read range of up to 6 inches
- Standard 26-bit Wiegand interface
- HID compatible
- Potted for indoor or outdoor use
- Pigtail connection for easy installation
- Red LED indicates power and flashes off during card read
- Transducer provides beep during card read

- Standard 26-bit Wiegand interface
- Potted for indoor or outdoor use
- Pigtail connection for easy installation
- Red LED shows activity
- Beep tones acknowledge key strokes
- Programmable Facility Code stored in non-volatile memory (no batteries required)

- PRX-3-MK-VEGNP allows the PRX-3 and a Viking entry phone (with surface mount box) to be mounted directly to a Viking VE-GNP gooseneck pedestal
- PRX-3-MK-VEGNP mounting plate can be mounted horizontally or vertically to allow the PRX-3 to be positioned on the left, right, top or bottom of the entry phone with VE-5+5 or VE-6+7 surface mount box
- Mounting plate is made from durable 3/8 inch thick black UV stable textured ABS plastic
- Mounting hardware is included
- PRX-3-MK-VEGNP kit also provides a gasket for sealing the back side of the VE surface mount box

- Viking lock and key set for VE-series phone boxes

- Red lens cover, compatible with:
- SL-2
- SL-2-EWP
- BLK-4
- BLK-4-EWP

- Viking Electronics no-dial phone
- Red
- Can be used on an analog PABX station port or standard CO line to receive calls
- Can also be used with a dedicated ringdown circuit, such as Viking's DLE-200B, to provide cost effective point-to-point communications
- Built in volume adjustable ringer
- No dial pad
- Hearing aid compatible amplified handset with volume control
- Available in two colors: red or ash
- Optional VE-9x12 or VE-9x20 weatherproof box
- Ringdown phones
- Pool phones
- Catalog sales
- Kiosks in malls
- Courtesy and customer service phones
- Automated tellers
- Security and emergency phones
- Point to point communication when used with the DLE-200B Line Simulator

- Heavy cast aluminum construction
- Gasket sealed door
- Drip guard
- 3/4

- Viking RAD-1A Remote Access Device
- RAD-1 The RAD-1 allows you to call from any Touch Tone phone then remotely access 1- or 2-way paging systems, service observers, digital recorders, church programs, etc. The unit connects to any C.O., CENTREX, or PABX line, answers on the first ring and disconnects on CPC, time out, or by dialing

- Programmable access code
- Normally open or normally closed relay
- Selectable relay closure times
- Selectable ring delay (1,2, 6, or 15)
- Easy installation with modular jacks and screw terminals
- Automatic disconnect or return to secure mode after 60 seconds
- Power multiple units from one adapter

- High resolution color composite video camera with wide 70¦ viewing angle, tilt/swivel adjustments, and wide operating temperature range
- Designed for outdoor use, all cameras come standard with Enhanced Weather Protection (EWP)
- All cameras designed to meet IP66 Ingress Protection Rating
- 5V DC adapter and wire connectors included
- Direct replacement for the cameras included in the following Viking models: AES-2005, E-35, E-50, E-65, E-75, K-1205, K-1705-3 and W-3005.

- Transmits the CTG-2A RS485 clock sync data wirelessly to the CL-Series wireless clocks
- Can be configured as a wireless repeater to extend RF transmit range
- Powerful transmission range: Up to 6500 ft in open space
- Compact, slim design makes it versatile for mounting
- Can wirelessly receive and transmit data
- LEDs for indication of transmission and / or receipt of RS485 signal
- Powerful 1 Watt (30dBm) transmission
- Works with VikingÆs 915 û 928 MHz frequency hopping technology
- FCC Part 14 compliance (no license required)
- Input Voltage: 90 û 230VAC 50 / 60 Hz
- Housing Dimensions: 11? x 8? x 1.7? (279mm x 203mm x 43mm)
- Antenna Length: 7? (178mm)
- Shipping Weight: 4.9 lbs (2.22 kg)
- Temperature: 32¦F to 122¦F (0¦C to 50¦C)
- Humidity: 5% to 95% non-condensing
- Input Signal: RS485 (from Viking CTG-2A)
- Operating Frequency: 915 û 928MHz frequency hopping technology
- RF Power Output: 1 Watt (30 dBm), transmits up to 6500 ft in open space
- Compliance: FCC compliant, part 15, section 15,247 (no license required)
- Housing: Smooth surface metal enclosure
- Color: Black
- Mount: Wall mount

- Easily added to Viking phones that don't provide a ringer from the factory
- Provides a loud electronic warble each time standard ring voltage is detected
- Kit includes a capacitor and a ringer

- Black plastic rough-in box for:
- E-10A
- E-10A-EWP
- E-10-IP
- E-10-IP-EWP
- E-15
- E-15-EWP
- E-1600-20A
- E-1600-20A-EWP
- E-1600-20-IP
- E-1600-20-IP-EWP
- E-1600-30A
- E-1600-30A-EWP
- E-1600-30-IP
- E-1600-30-IP-EWP
- E-1600-55A
- E-1600-55A-EWP
- E-1600-55-IP
- E-1600-55-IP-EWP
- E-30
- E-30-EWP
- E-30-IP
- E-30-IP-EWP
- E-35
- E-35-EWP
- E-35-IP
- E-35-IP-EWP
- W-1000
- W-1000-EWP
- W-3000
- W-3000-EWP
- W-3005
- W-3005-EWP

- Viking entry phone
- Compact size: Front panel is the size of a typical single gang mid- size wall plate
-Mounting: Flush mounts in any single gang (1.7ö deep minimum) electrical box (single gang old work rough-in box included) or surface mounts in a Viking model VE-3x5 (not included)
- Available in 5 standard faceplate finishes: Brushed Stainless Steel, Oil Rubbed Bronze, Polished Brass, Satin Black and Satin White
- PNL-40 faceplates: Replacement faceplates with matching screws available in all five standard finishes
- Weather Resistant Features: Mylar speaker, faceplate gasket, mic and speaker gasket, internally sealed (IP67) push button switch, self draining mic mount and UV stable weather resistant powder coating (excluding E-40-SS Stainless Steel faceplate)
- Optional Enhanced Weather Protection (EWP) available
- Vandal Resistant Features: 16 gauge polished brass or 18 gauge stainless steel faceplate, stainless steel push button, stainless steel speaker screen, scratch resistant powder coating, hex drive mounting screws
- Telephone line powered
- Microphone and speaker volume controls
- Programmable Intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out
- Selectable auto answer feature for monitoring
- Programmable VOX (mic/speaker) switching speed

VKE40BK

- Viking Secure Touch Tone Relay Controller
- Secure control of high security building entry systems
- Door strikes and gates in conjunction with door boxes (W-1000, etc.), entry phones (E-10A, E-20B, E-30, E-40, E-50, K-1700-3, etc.) or hot-line/panel phones (K-1500-7, K-1900-7, etc)
- User touch tone programmable
- Non-volatile memory - retains programming during power outage
- 6 digit programmable security code (to access programming)
- Switchable 32V talk battery
- Programmable relay activation time
- Programmable relay activation code (1-2 digits or **)
- Operates on any 12-24V AC/DC power source
- LEDÆs for power / relay activation
- Programmable allow / restrict for dialing from entry phone
- Programmable allow / restrict for keyless entry from entry phone
- 32 keyless entry codes
- Trigger input for contact closure from postal lock, request to exit, etc.