Shop by Brand: Viking Electronics

- Elevators
- Parking ramps/lots
- Pools
- Automated Tellers (ATM)
- Area of refuge locations
- Lobbies
- Entryways
- Roadside emergency stations
- Stadiums
- Convention centers
- Campus Security Sites
- Entryways
- Stairwells in Public Buildings
- Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD# 859
- Meets ADA requirements for Emergency Phones:
- Can automatically light the ôCall Connectedö LED for the hearing impaired
- Transmits a unique location I.D. code or voice announcement
- Grade 2 Braille label for the visually impaired
- Non-volatile digital voice announcer with 16 seconds of voice memory
- Provides contact or switched 12V DC for controlling a strobe light
- Advanced call progress detection
- Handsfree operation
- Phone line powered emergency phone (LDB-3 requires power)
- Non-volatile memory (no batteries required)
- Marine grade 316 stainless steel prevents corrosion
- Dials up to 5 emergency numbers
- Cycles through backup emergency and non-emergency numbers on busy or no-answer
- Hangs up on CPC, silence, busy signal, dial tone, time-out or touch tone command
- Programmable to auto-answer on incoming calls
- Remotely programmable
- Extended temperature range (-15¦F to 130¦F)
- Central Station Monitoring capability (dials 2 numbers)
- Separate central station voice speed dial number
- High visibility, vandal and weather resistant
- Phone Power: Telephone line powered (24V DC/20mA min)
- LDB-3 Control Module: 120V AC/12V DC 500mA, UL listed adapter provided
- Mounting: Flush mount to Talk-A-Phone ETP towers, wall mounts, boxes and pedestals
- Environmental: -26¦C to 54¦C (-15¦F to 130¦F) with 5% to 95% non-condensing humidity
- Material: .125ö (11 gauge) brushed stainless steel
- Connections: Color-coded wires with gel-filled butt connectors

-Meets ADA requirements for Emergency Phones: Can automatically light the

Can automatically light the "Call Connected" LED for the hearing impaired.Transmits a unique location I.D.code or voice announcement.Grade 2 Braille label for the visually impaired.

- Meets ADA requirements for Emergency Phones:
Can automatically light the

- Supports all high speed data, produces name or name and number caller ID data
- Audio input/output for recording voice prompts
- 40 V DC talk battery
- Precise call progress tones (dial tone, ring back, fast and slow busy, SIT, and re-order tones)
- Standard and distinctive 20Hz AC ringing
- Provides CPC breaks after disconnect
- Touch Tone detection
- Ringdown mode (no Touch Tones required)
- 911 trainer mode for classroom training

Analog Emergency Line Sharing Device for IP PBXs/VoIP Phone Systems
Shares FXO port with another analog device and seizes the line in the event of a 911 call
Maintains the availability of the line in the event the emergency call is disconnected, so 911 personnel can call back to reestablish the connection
Routes both incoming and outgoing calls
Gives priority to emergency devices
Incoming calls routed to one of two ports by distinctive ring or quick callback
Status LED displays mode of operation
Provides a busy signal to the phone port when an emergency device is in use

- Automatic Noise Cancelling (ANC) feature for proper operation in noisy environments
- Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics, speaker/mic screen, heavy duty metal ôCallö button and T-10 Torx security mounting screws and drive bit
- Weather Resistant Features: Marine grade 316 stainless steel faceplate, screws and push button switch. Switch internally sealed per IP67. Mylar speaker. Self-draining mic mount. Faceplate, mic and speaker gaskets
- Telephone line powered
- Non-volatile E2 memory (no batteries required)
- Programmable to dial up to 5 numbers on busy / ring no answer
- Blue off-hook LED indicator
- Volume adjustments for microphone and speaker
- Advanced call progress detection: disconnects on busy signal, return to dial tone, CPC, reorder tone, maximum call time out and programmable silence time out
- Selectable auto-answer feature for monitoring
- Extended temperature range (-15¦F to 130¦F)
- E-32 flush mounts in a standard double gang box (not included)
- Optional PB-1 Panic Button Kit (DOD# 233)

New Automatic Noise Cancelling (ANC) feature for proper operation in noisy environments
- Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics, speaker/mic screen, heavy duty metal ôCallö button and T-10 Torx security mounting screws and drive bit
- Weather Resistant Features: Marine grade 316 stainless steel faceplate, screws and push button switch. Switch internally sealed per IP67. Mylar speaker. Self-draining mic mount. Faceplate, mic and speaker gaskets.
- Telephone line powered
- Non-volatile E2 memory (no batteries required)
- Programmable to dial up to 5 numbers on busy / ring no answer
- Blue off-hook LED indicator
- Volume adjustments for microphone and speaker
- Advanced call progress detection: disconnects on busy signal, return to dial tone, CPC, reorder tone, maximum call time out and programmable silence time out
- Selectable auto-answer feature for monitoring
- Extended temperature range (-15¦F to 130¦F)
- E-32-EWP is designed to meet IP66 Ingress Protection Rating
- E-32 flush mounts in a standard double gang box (not included)
- Optional PB-1 Panic Button Kit (DOD# 233)
- Also available with VoIP interface, see DOD# 248 for more info

Accessible Flush Mount Entry System with Accessibility Features and Color Video
Provides both audio and visual assistance for those with disabilities, two-way handsfree audio communication and color composite video of who is at your door or gate entrance.
Built-in high resolution color video camera with wide viewing angle, tilt/swivel adjustments and wide operating temperature of -15° to 130°
16 position, back-lit display with 1/2" tall characters
Non-volatile digital voice announcer
Factory configured to handle 75 apartments (expandable to 525 apartments using ERAM-4M expansion kits)
Non-volatile data memory for names, phone numbers and access codes
Volume control
AES-NET card reader interface now included
TTY jack for connection to personal teletypewriter (TTY)
Postal lock switch input
Available in surface mount (AES-2005S) or flush mount (AES-2005F) configurations
Keyless entry capability
5 Amp door strike/magnetic lock control relays
Vandal resistant: 12 gauge stainless steel front panel, 1/4" thick abrasion, resistant polycarbonate display lens, metal keypad and push button switches, front panel lock, speaker protection screen
Weather resistant features: Conformal coated circuit board, gasketing behind lens, speaker, keypad, and perimeter of front panel, sealed switches and keypad
Requires a PB-100 for programming

- Eliminating ground loop hum in paging systems
- Paging or mass notification sounds on a phone line
- Strip off talk battery voltage from paging station
- Consolidating two audio sources into one
- Daisy chain a paging system speaker output into a second power amplifierÆs input
- Low cost solution
- Inputs available on screw terminals, RCA Jack, and modular jack
- Outputs available on screw terminals and RCA Jack
- Line Level, Speaker Level, or Telecom Station inputs
- Line Level output
- Wall mountable with foam tape and screws
- Excellent sound quality

- Line powered
- Modular or punch-down installable
- One and two line devices
- Compatible with analog lines with 12V DC or higher talk battery
- Transparent operation

- Viking Electronics entry phone
- Compact size: Front panel is the size of a typical double gang mid- size wall plat
- Flush mounts in a double gang electrical box (2.25ö deep x 3.7ö wide x 2.84ö tall minimum)
- PNL-40 faceplates: Replacement faceplates with matching screws available in all five standard finishes
- Weather Resistant Features: Mylar speaker, faceplate gasket, mic and speaker gasket, internally sealed (IP67) push button switch, self draining mic mount and UV stable weather resistant powder coating
- Vandal Resistant Features: 16 gauge polished brass or 18 gauge stainless steel faceplate, stainless steel push button, stainless steel speaker screen, scratch resistant powder coating, hex drive mounting screws
- Blue LED helps locate the push button, indicate ringing and off-hook
- Telephone line powered
- Microphone and speaker volume controls
- Programmable Intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out
- Selectable auto answer feature for monitoring
- Programmable VOX (mic/speaker) switching speed
- Black

VKE60BK

- Designed to be used with any of the VE-Series backboxes and is ideal for drive up communications
- Designed to mount with VE-5x5, VE-6x7, VE-5x10
- Finish: UV stable black powder paint

- Blank aluminum 5

- BLK-4-EWPÆs control module and strobe light come with Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD# 859
- Durable polycarbonate lens
- High output long life LED technology
- Four programmable flash patterns: - Single Flash - Double Flash - Quad Flash - Flicker Flash
- 6 programmable beacon and strobe brightness settings
- Immune to shock and vibration
- Flush mount or surface mount with weatherproof single gang box (included)
- 3/4ö knockouts for connecting conduit, etc.
- Strobe and control module may be installed separately
- Can be configured to signal: ringing, off-hook, a combination of both ringing and off-hook (line in-use), or triggered from a contact closure
- One set of (NO) normally open and (NC) normally closed relay contacts provided
- Selectable ring cadence mode (strobe light will remain flashing between rings)
- Switched 12V DC output (follows relay activation for powering strobe lights, cameras, etc.)
- On/off switches for ring detection and off-hook/loop detection
- Disable input, ideal for use with two-button emergency phones like VikingÆs E-1600-20A (DOD# 215), will not activate strobe light on ôInfoö calls
- Applications:
- Ringing Phone or TTY indication for the hearing impaired
- Ringing phone indication in loud warehouses and factories
- Emergency illumination for emergency phones in elevators, campuses, hallways, parking ramps, etc.
- Alarm indication for security systems or alarm panels with phone dialers

- Viking Electronics entry phone
- Compact size: Front panel is the size of a typical double gang mid- size wall plat
- Flush mounts in a double gang electrical box (2.25ö deep x 3.7ö wide x 2.84ö tall minimum)
- PNL-40 faceplates: Replacement faceplates with matching screws available in all five standard finishes
- Weather Resistant Features: Mylar speaker, faceplate gasket, mic and speaker gasket, internally sealed (IP67) push button switch, self draining mic mount and UV stable weather resistant powder coating
- Vandal Resistant Features: 16 gauge polished brass or 18 gauge stainless steel faceplate, stainless steel push button, stainless steel speaker screen, scratch resistant powder coating, hex drive mounting screws
- Blue LED helps locate the push button, indicate ringing and off-hook
- Telephone line powered
- Microphone and speaker volume controls
- Programmable Intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out
- Selectable auto answer feature for monitoring
- Programmable VOX (mic/speaker) switching speed
- Bronze

VKE60BN

- Viking Standard Carbon Handset with Coily Cord is compatible with DVA-2WA, DVA-500A, DVA-1003B, DVA-3003, TMS-6x and TMS-12A voice recording

- Provides additional economical paging coverage to existing Viking paging units or to any system with an 8 ohm output
- Flush mounts into a 9.5

- Ring with adjustable volume and cadence
- Hearing aid compatible amplified handset with thumbwheel volume control
- Optional RC-4A for secure remote relay control, see DOD 582
- SIP compliant
- PoE powered (class 1, <4 Watts)
- Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging
- Network downloadable firmware
- Cycles to up to three rollover phone numbers on busy or no-answer
- Remotely programmable
- Extended temperature range (-40¦F to 140¦F)
- Selectable auto-answer feature for monitoring
- Diagnostics (for testing remote RC-4A relay)
- K-1900D-IP available in red or ash

- Ring with adjustable volume and cadence
- Hearing aid compatible amplified handset with thumbwheel volume control
- Optional RC-4A for secure remote relay control, see DOD 582
- SIP compliant
- PoE powered (class 1, <4 Watts)
- Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging
- Network downloadable firmware
- Cycles to up to three rollover phone numbers on busy or no-answer
- Remotely programmable
- Extended temperature range (-40¦F to 140¦F)
- Selectable auto-answer feature for monitoring
- Diagnostics (for testing remote RC-4A relay)
- K-1900D-IP available in red

- Ring with adjustable volume and cadence
- Hearing aid compatible amplified handset with thumbwheel volume control
- Optional RC-4A for secure remote relay control, see DOD 582
- SIP compliant
- PoE powered (class 1, <4 Watts)
- Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging
- Network downloadable firmware
- Cycles to up to three rollover phone numbers on busy or no-answer
- Remotely programmable
- Extended temperature range (-40¦F to 140¦F)
- Selectable auto-answer feature for monitoring
- Diagnostics (for testing remote RC-4A relay)

- Ring with adjustable volume and cadence
- Hearing aid compatible amplified handset with thumbwheel volume control
- Optional RC-4A for secure remote relay control, see DOD 582
- SIP compliant
- PoE powered (class 1, <4 Watts)
- Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging
- Network downloadable firmware
- Cycles to up to three rollover phone numbers on busy or no-answer
- Remotely programmable
- Extended temperature range (-40¦F to 140¦F)
- Selectable auto-answer feature for monitoring
- Diagnostics (for testing remote RC-4A relay)

- Accurate 24 hour digital time clock displays hours and minutes synced to AC power
- User programmable 24 hour, 128 event timer in two separate schedules
- Programmable day of week on/off feature
- Programmable single, double or triple alert tone output (selectable bong or buzzer)
- Three contact closure controlled sounds:
- 1) Emergency siren (yelp) sound
- 2) Temporal (slow whoop) evacuation signal
- *NFPA/ANSI compliant when used with supporting equipment
- 3) Doorbell (chime) sound
- Volume controllable, 600 ohm line level audio output
- Non-volatile memory with four day clock backup
- Two sets of DPDT relay contacts for muting paging or background music during alert tones or timed relay events
- Switchable 50/60 Hz operation
- Switch for Daylight Saving Time
- Time Relay Mode

- 20 gauge galvanneal steel cabinet with gloss white powder coat finish
- Optional roller catch to keep door closed when not using the lock
- Lock with breakaway cam and two keys
- Heavy duty chrome plated cast handle
- Mounting studs on back panel for mounting any standard wall phone
- Hinged door with clear acrylic window

- Viking Electronics digital mass notification announcer
- Capable of proviging up to 2 minutes of digitally recorded voice emergency instructions and alert tones over existing paging system
- Connects to a phone line, analog phone system station or a phone system's unused trunk/line input allowing you to securely page, trigger emergency messages and/or alert tones and program the unit from any remote touch tone phone
- When activated, interrupts any current paging or background music and injects an emergency voice message and/or alert tone over your paging system
- Live page can also be announced
- Can be programmed to repeat one 2 minute message, two 1 minute messages, four 30 second messages or five 24 second messages
- 10 different alert tones for emergency mass notification of evacuation, lock down, severe weather, fire, hazardous material release, tornado, flash flood, terrorist alert, all-clear, etc.
- Non-volatile memory (no batteries required)
- Up to 2 minutes of total message record time
- Record up to 5 different emergency messages
- Ten different emergency alert tones:

1. Code 3 Temporal (ANSI S3.41) Slow Whoop
2. Hi/Low Siren
3. Wail Siren
4. Alert horn
5. Attack Siren
6. Fast Sweep Siren
7. March Time Horn
8. Bell
9. Buzzer
10. 1K Hz Steady Tone

- Call progress detection for automatic hang up on CPC, busy signal, dial tone or silence
- Separate volume controls for paging, messages and alert tones
- Automatically interrupts current page or background music to inject emergency announcement, alert tones or live page
- Programmable trigger input to activate a message and/or alert tone
- N.O. & N.C. trigger output contacts for activating flashing beacon (BLK-3-EWP), Alarm Dialer (K-202-DVA), etc.
- Security code to prevent fraudulent use
- Connects directly to an unused line input (trunk) or station port of a phone system or to a dedicated phone line

VKDNA150

- Viking 3port digital voice announcer
- Increases call handling capacity by answering on demand or during the first ring and automatically adjusting the announce cycle to the message length
- 1 minute record time per channel
- Record and review locally or remotely or download prerecorded announcements from a tape player
- Selectable ring delay
- CPC signal and disconnect detection
- Callers may be transferred after the announcement
- Messages stored in non-volatile memory (no batteries required)
- Recording volume LED indicator for consistently high-quality recordings
- Recognizes handshake signals from virtually any PABX, Centrex, or CO line
- Programmable to repeat announcement
- One year factory warranty
- ACD/UCD announcements
- Intercept announcement
- Announce-only applications: school closings, ski resorts, night answer, wake up calls
- Replace existing tape and drum recorders
- Any application where information must be repeated continuously and may require frequent updating

VKDVA1003B

- 1 minute of record time
- Record and review announcements locally or remotely or download prerecorded announcements from a tape player
- Selectable ring delay
- Detects CPC signals and disconnects
- Callers may be transferred after the announcement
- Messages stored in non-volatile memory (no batteries required)
- Recording volume LED indicator for consistently high-quality recordings
- Recognizeds handsake signals from virtually any PABX, Centrex or C.O. line
- Must have Carbon handset to record directly to the unit

- Viking door bell button panel
- Permits user to install a simple door bell today and allow for an easy upgrade to a viking E-40 door phone
- Fits any standard single gang box
- Offered in two colors, off-white and dark brown
- Panels are made from unbreakable plastic
- Weather resistant gasket included
- Screw terminals on button for easy wiring
- Use with the Viking VE-3x5 enclosure for surface mounting
- Promotional card for future sales
- VKDB40BN

- Viking door entry/ CCTV controller
- Allows single line phones or phone systems to share a phone line with one or two Viking doorboxes or paging amplifiers
- Provides two Touch Tone controlled relays to operate door strikes or gate openers and provides doorbox triggered CCTV camera switching
- Switch between two CCTV cameras when either doorbox is activated
- Handy as a line concentrator - one fax machine or answering machine can answer 3 lines
- Doorbox triggered CCTV switching
- Custom ringing mode allows you to distinguish doorbox calls from CO calls
- Compatible with up to two of the following: W-1000, W-2000A, or W-3000
- Calls can be placed on hold when visitors call from the doorbox or when paging
- Call waiting tones indicate which doorbox is calling and distinguish a doorbox call from a CO line call
- Provides two Touch Tone controlled NO or NC dry contact closures (5 amp rating) for door strikes or gate openers
- Keyless entry/postal lock input
- Built-in talk battery for

- Optional door return hinge spring available to assure door is closed after use.

- Built-in high resolution color video camera with wide viewing angle, tilt/swivel adjustments and wide operating temperature
- Audio and video transmission on one CAT5E cable
- Vandal Resistant Features: 14 gauge louvered 316 marine grade stainless steel faceplate with permanent laser etched graphics, stainless steel speaker/mic screen, heavy duty metal ôCallö button,scratch resistant powder coating (optional VE- 5x5) and hexdrive mounting screws
- Weather Resistant Features: Marine grade 316 stainless steel faceplate, screws and and push button switch. Switch internally sealed per IP67. Mylar speaker. Self-draining mic mount. Faceplate, mic and speaker gaskets. Weather resistant powder paint on optional VE-5x5.
- Volume adjustments for microphone and speaker
- Blue call progress / night light LED
- High output speaker amplifier with volume adjustment POT
- 20 Hz ring generator (6.0 REN ring load maximum)
- Selectable ring cadence (standard, double, short/short/long, or short/long/short)
- Selectable number of rings (2, 3, 10 or 30)
- Selectable ôPush-to-Talkö feature for noisy environments
- W-3005-EWP is designed to meet IP66 Ingress Protection Rating (see DOD# 859 for more information)
- Connect to a phone systemÆs unused trunk input, FXO port or a Viking C-1000B Controller