Shop by Brand: Viking Electronics

- Viking FaxJack phone/fax switch
- Allows any business, largeor small, to enjoy the convenience of automated data transmission without the perpetual monthly expense of a dedicated phone line
- Versatile phone/data/fax switch with the ability to automaticallyroute calls via fax CNG tone, central office distinctive ring, or touch tones included in the dial string by the calling party
- Offers full manual transfer capabilities
- Stores and retransmitscaller ID information so that it is truly caller ID compatible
- Applications: governmental, commercial, home office, industrial, personal computers, vending machines, remote access applications, point-of-sale terminals, fast food chains, retail stores, convenience stores
- Four ports allow any four analog devices to share a single line
- Routes calls via CNG tone, distinctive ringing, touch tones sent by calling device or manually
- Provides realistic ring-back tones while re-ringing selected device
- Transfer from one port to another as often as may be required during the samecall
- Caller ID information is stored and retransmitted during transfer
- Automatic privacy eliminates interruptions on both in and outbound calls
- Monitors for calling party control (CPC)
- All in and outbound calls are routed to the phone port during a power failure
- Power: 120VAC/12V DC 500mA, UL listed adapter provided
- CNG Detection: 1100 Hz burst
- Connections: (1)10-position cage clamp terminal strip
- VKFAXJ1000

- Viking Electronics long loop adapter
- Provides 4 long line and off premise extension (OPX) capabilities for PABX and KSU analog stations, ISDN terminal adapters, channel banks, etc.
- Converts any four low talk battery boltage or weak ringing analog line into a standard 48V line with powerful 20Hz sine wave ring signal
- Compatible with pulse dialing, touch tone dialing, hook switch flash features, CPC signaling and Caller ID features
- Ground screw terminal allows for improved surge protection and as an earth ground reference for the regenerated lines
- Easy to install, requires no programming
- Convert four analog KSU/PABX stations to standard voltage OPX
- Provides 48 VDC talk battery
- Provides 20 HZ, 10 REN sine wave ringing
- Passes Caller ID information
- Passes hook switch flash DTMF and pulse dialing compatible
- Passes CPC signals
- Electrically isolates PABX station from extended loop
- Provides additional lightning and surge protection
- Selectable ring protocols

- Viking universal paging interface
- Select: FXO (loop start), FXS (ring trip) or paging port (VOX relay) interface mode
- No power supply required in FXS interface mode
- Up to 6 units can be powered from one adapter in the FXO or VOX mode
- 30V DC talk battery for interfacing with FXO or unused phone system line input/trunk port
- Floating 600 ohm paging output with volume control
- Normally open or closed relay for external paging amp activation or interfacing the paging amp with an external background music source
- 800 Hz pre-announce page tone (on/off)
- Compatible with 24 to 48 volt FXS operation
- Calling party control (CPC) detection for immediate disconnect
- Busy signal detect disconnect
- 2.5 to 5 second VOX silence disconnect timer
- Programmable VOX trigger sensitivity
- 16 or 36 second default disconnect timer
- Screw terminal block connections
- Wall mount housing: (2) #6x3/4 panhead screws included
- Power: 12-24V DC @ 100mA, 120V AC/12V DC @ 500mA, UL listed adapter included (not required in FXS mode)
- Dimensions: 111mm x 76mm x 36mm (4.38ö x 2.97ö x 1.38ö)
- Shipping Weight: .48 kg (1.06 lbs)
- Environmental: 0¦C to 32¦C (32¦F to 90¦F) with 5% to 95% non-condensing humidity
- Relay Contacts: 30V DC@1A, 110V DC@0.3A, 125V AC@0.5A
- VOX Minimum Audio Signal to Activate Relay: -30dbm minimum / -26dbm minimum @ 1KHz with VOX sensitivity switch at normal / lower positions
- VOX Time Out Disconnect: 2.5 or 5 second
- Default Time Out Disconnect: 16 or 36 seconds
- Talk Battery: 30V DC

VKFXI1

- Viking calling party control - generate CPC disconnect signals on four separate phone lines
- Phone line powered (no AC needed)
- Handle 4 lines in 1 unit
- Generates CPC disconnect on: Return to dial tone (programmable), Busy signal, Reorder (fast busy), Steady silence (programmable)
- LED shows: In use, Audio detected, Generated CPC signal
- Caller ID compatible
- Power: Telephone line powered (20VDC, 20mA minimum)
- Dimensions: 133mm x 89mm x 44mm (5.25

- Viking Electronics start converter
- Allows PABX and key systems configured for loop start trunks, as well as standard tele phones to be connected to C.O. ground start trunks
- Eliminates wiring ground start buttons in standard telephones
- 12 circuit automatic ground start to loop start equipment converter
- Stackable to increase capacity
- Easy, straight forward installation via an RJ-21X 25 pair connector
- Power: The unit is powered by the 48V ground start C.O. trunk lines - no AC power supply required
- Environmental: 0¦C to 32¦C (32¦F to 90¦F) with 5% to 95% non-condensing humidity
- Connections: (1) RJ-21X

VKGLS12

- Viking handset dialer
- Add touch tone capability to PABX consoles
- Universal keypad touch tone generator capable of providing DTMF signaling
- Permits access via DTMF signaling to beepers, voice mail and banking services from phone system consoles or other equipment which cannot provide touch tones
- Easily installed in series with modular handsets and headsets or interfaces directly to Tip and Ring
- Add DTMF signaling to console phones for: beeper paging, voice mail systems, automated attendants, banking services, access control (interfaced with an RC-3 or RC-2A for door/gate control), program Viking hot-line dialers and emergency phones
- Easily connects in series with handset and headsetsor interfaces directly to Tip and Ring with the furnished adapter kit
- Provides DTMF signaling across a dry pair of wires for in-house applications
- Compatible with console phone auxiliary hand-set jacks
- Powered by 9 V battery (provided) or optional PS-1A 13.8V AC adapter
-

- Viking simple emergency phone without auto dialing
- Door or gate communication
- Commercial, industrial and residential door security
- Truck stop/gas station fuel island communication
- Business delivery entrances
- Use in conjunction with a Viking Hot-Line Dialer on C.O. lines or analog PABX/KSU stations
- Use on any programmed ringdown circuit of an analog PABX/KSU station
- One year manufacturer's warranty
- Handsfree or handset available
- Phone line powered
- No dial pads
- Designed to mount in a standard emergency phone enclosure
- Built for easy installation and simple operation
- Auto answer feature allows remote monitoring (can be disabled)
- Adjustable time out to limit prank calls and false alarms (approximately 30 seconds - 7 minutes)
- Auto-answer feature allows remote monitoring (can be disabled)

- Viking SS handsfree phone with key pad
- Vandal Resistant Features: 14 gauge, louvered, stainless steel faceplate with stainless steel speaker/mic screen, heavy duty metal keypad and ôcallö button
- Optional enhanced weather protection (EWP)
- Yellow ôin useö LED
- Volume adjustments for microphone and speaker
- Advanced call progress detection: disconnects on busy signal, return to dial tone, CPC reorder tone, maximum call time out and selectable silence time out
- Selectable auto-answer feature
- Selectable push button disconnect
- Zinc plated steel rough-in box with (2) 3/4ö conduit knockouts
- Optional VE-6x7 surface mount box available
- Selectable maximum call time
- Selectable VOX switching speed

Built-in 5 number auto-dialer
Built-in high resolution color video camera with wide viewing angle, tilt/swivel adjustments and wide operating temperature of -30¦F to 150¦F
Audio and video transmission on one CAT5E cable (page 5)
Vandal Resistant Features: 14 gauge louvered stainless steel faceplate with stainless steel speaker/mic screen, heavy duty metal ôCallö button, impact and scratch resistant camera lens and hex drive mounting screws
Weather Resistant Features: Mylar speaker, faceplate gasket, mic and speaker gasket, internally sealed (IP67) push button switch, sealed camera lens, potted camera circuit board, stainless steel phone and camera mounting hardware
Optional Enhanced Weather Protection (EWP) conforms to NEMA requirements, see DOD# 859 for more information
Red ôoff-hookö LED
Volume adjustments for microphone and speaker
Advanced call progress detection: disconnects on busy signal, return to dial tone, CPC, reorder signal, maximum call time out and selectable silence time out
Selectable auto-answer feature for monitoring
Selectable push button disconnect
Optional VE-5x5 surface mount box available
Selectable maximum call time
Selectable VOX switching speed

- Built-In high resolution analog NTSC color video camera with wide viewing angle, tilt / swivel adjustments and wide operating temperature
- 2 Amp relay contacts for door / gate or SL-2 Strobe Light (DOD 242) control
- Blue Call Connectedö LED indicator
- SIP compliant (see Product Manual for list of compatible IP-PBX phone systems)
- PoE powered (class 1, <4 Watts)
- Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
- VoIP audio detection eliminates the need for ôPush to Talkö mode
- Handsfree operation
- T-10 Torx security screws for added security
- Laser etched graphics
- Programmable to dial up to 5 numbers
- Cycles through backup phone numbers on busy or ring-no-answer
- Hangs up on busy signal, time-out or touch tone command
- Programming software included
- Network downloadable firmware
- Remotely programmable
- Diagnostics for testing mic, speaker, and relay
- Flush mounts using the included rough-in box or surface mount using a Viking VE-5X5 Surface Mount Box (DOD 424)
- Extended temperature range: -40¦F to 140¦F (-40¦C to 60¦C)
- Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859

VoIP Entry Phone with Analog Color Video Camera
Built-In high resolution analog NTSC color video camera with wide viewing angle, tilt/swivel adjustments and wide operating temperature
Self diagnostic reports via email (testing com, mic, speaker & switch)
Automatic polling and programming software included
2 Amp relay contacts for door/gate or SL-2 strobe light control
Blue ôCallö LED indicator
SIP compatible
PoE powered (class 1, <4 watts)
Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
VoIP eliminates the need for ôPush to Talkö mode
Network downloadable firmware
Handsfree operation
Marine grade 316 stainless steel prevents corrosion
Programmable to dial up to 5 numbers on busy or ring no answer
Hangs up on busy signal, time-out or touch tone command
Remotely programmable
Extended temperature range (-30¦F to 130¦F)
Replacement board available
Volume adjustments for microphone and speaker

- Vandal Resistant Features:
- 12 gauge (0.105" thick) 316 stainless steel front panel
- Permanent laser etched graphics
- Metal handset cradle
- Armored handset cable with internal stainless steel lanyard
- Hex drive mounting screws
- Weather Resistant Features:
- Marine grade 316 stainless steel faceplate
- Marine grade 316 stainless steel hex drive screws
- Gaskets (on EWP models)
- Auto dials one programmable speed dial number (up to 32 digits)
- Touch tone or pulse dialing
- Non-volatile memory (no batteries required)
- Operates on analog PABX and key system extensions or analog Centrex and CO lines
- Programmable 6 digit security code
- Touch tone programmable
- 12ö armored handset cable with internal stainless steel lanyard for added strength and vandal resistance
- Programmable pre-dial pause
- Blocks fraudulent calls from hand held pocket dialers
- Hearing aid compatible amplified handset with sealed ¡¡push button volume control
- Programmable default volume level
- Programmable volume control disable
- Flush mount using a standard double-gang box (not included)
- Surface mount using an optional VE-5+10 surface mount box (not included, see DOD 424)

- Vandal Resistant Features:
- 12 gauge (0.105

- Vandal Resistant Features:
- 12 gauge (0.105" thick) 316 stainless steel panel with permanent laser etched graphics
- Armored handset cable
- Metal cradle
- Heavy duty metal keypad
- Hex drive mounting screws
- Weather Resistant Features:
- Marine grade 316 stainless steel faceplate
- Marine grade 316 stainless steel screws
- Internally sealed keypad
- Auto dials one programmable speed dial number (up to 32 digits)
- Multi-number dialer mode adds 5 speed dial numbers (up to 16 digits)
- Touch tone or pulse dialing
- Non-volatile memory, no batteries required
- Operates on analog PABX and key system extensions or analog Centrex and CO lines
- Programmable 6 digit security code
- Touch tone programmable
- Armored 12" handset cable with an internal stainless steel lanyard for additional cable strength
- Programmable pre-dial pause
- Blocks fraudulent calls from hand held pocket dialers
- Limited toll restriction in standard touch tone phone mode
- Hearing aid compatible amplified handset with sealed push button volume control
- Programmable default volume level
- Programmable volume control disable
- Zinc plated steel rough-in box with (2) 0.75" conduit knockouts included
- Flush mount using the included rough-in box or surface mount using a Viking VE-5+10 surface mount box (not included, DOD 424)

- Telephone line powered
- Hearing aid compatible amplified handsets
- Rotary handset volume control
- 1-32 digit programmable speed dial number
- Touch Tone and 10/20 pps pulse dialing
- Non-volatile E2 memory (no batteries required)
- Restricts fraudulent calls from hand held dialers
- K-1900D/W-2 available in red or ash
- Optional Q170600 ringer (Fax Back Doc 845)
- Operates on a C.O. line or analog PABX/KSU extensions
- Ring detection (will not dial on incoming calls)
- Programmable security code to enter programming mode
- Touch Tone programmable
- K-1900-6 fits standard 500, 554, 2500 and 2554 set phones

- Telephone line powered
- Hearing aid compatible amplified handsets
- Rotary handset volume control
- 1 32-digit programmable speed dial number
- Touch Tone and 10/20 pps pulse dialing
- Non-volatile E2 memory (no batteries required)
- Restricts fraudulent calls from hand held dialers
- Available in red or ash
- Optional Q170600 ringer
- Operates on a C.O. line or analog PABX/KSU extensions
- Ring detection (will not dial on incoming calls)
- Programmable security code to enter programming mode
- Touch tone programmable VK-K-1900-6 fits standard 500, 554, 2500, and 2554 set phones

- Infrared remote control
- For use with the Viking Model SA-1S and SA-1H (pending) self amplified paging speakers
- Users set their own volume levels to suit the noise levels in the room
- Allows users to mute all background music and pages, individual pages, or just background music
- Audible feedback

- PoE powered (class 3, <13 Watts)
- Paging prioritization
- Plays audio from multicast
- SIP endpoint or multicast group member
- Supports up to 10 multicast paging groups
- Blue paging status LED indicator
- SIP compliant (see product manual for compatible IP-PBX phone systems)
- Autoprovisioning via Viking programming software
- Built-in high efficiency 6 watt class D amplifier
- SIP /Multicast: SIP page, SIP page and zoned multicast stream, zoned multicast receive
- Support for access code to prevent unwanted SIP calls
- Line-level audio output for connecting to an external amplifier
- Network remote speaker volume control
- Can drive additional external analog speakers for greater coverage
- Mounting: Blind mounts into 9.5 hole, clearance requirement of 3.45 (87.3mm) above 1/2 gypsum board ceiling
- Heavy duty back box protects speaker and circuitry from plenum dust

- 14 gauge brushed marine grade 316 stainless steel
- SIP compliant and PoE powered (class 2, <6.5 Watts)
- Remotely programmable via Web GUI
- Integrated 1080p HD video camera with 126¦ viewing angle
- H.264 and MJPEG video compression
- Dual-Stream HD video for up to two 1080p video streams
- Multicast paging compatible
- 2 Amp relay contacts for door strikes, gate controllers, strobe lights, etc.
- With Enhanced Weather Protection

- 14 gauge brushed marine grade 316 stainless steel
- SIP compliant and PoE powered (class 2, <6.5 Watts)
- Remotely programmable via Web GUI
- Integrated 1080p HD video camera with 126¦ viewing angle
- H.264 and MJPEG video compression
- Dual-Stream HD video for up to two 1080p video streams
- Multicast paging compatible
- 2 Amp relay contacts for door strikes, gate controllers, strobe lights, etc.

- 16 gauge steel with durable high visibility textured powder paint
- SIP compliant and PoE powered (class 2, <6.5 Watts)
- Remotely programmable via Web GUI
- Integrated 1080p HD video camera with 126¦ viewing angle
- H.264 and MJPEG video compression
- Dual-Stream HD video for up to two 1080p video streams
- Multicast paging compatible
- 2 Amp relay contacts for door strikes, gate controllers, strobe lights, etc.

- SIP compliant and PoE powered (class 2, <6.5 Watts)
- Remotely programmable via Web GUI
- Integrated 1080p HD video camera with 126¦ viewing angle
- H.264 and MJPEG video compression
- Dual-Stream HD video for up to two 1080p video streams
- Multicast paging compatible
- 2 Amp relay contacts for door strikes, gate controllers, strobe lights, etc.
- With Enhanced Weather Protection (EWP)

- SIP compliant
- PoE powered (class 3, <13 Watts)
- Paging prioritization
- Plays audio from standard multicast sources
- SIP endpoint or multicast group member
- Red call status LED indicator
- Compatible with Polycom multicast paging
- Built-in high efficiency 6 Watt class D amplifier
- Can drive up to six 8 ohm analog speakers for greater coverage
- SIP/Multicast: SIP page, SIP page and zoned multicast receive
- Support for access code to prevent unwanted SIP calls
- Hangs up on: busy signal, time-out, or touch tone command
- Network remote speaker volume control
- Mounting: Magnetically attach to speaker magnet or fasten to the 25/70V transformer mounting holes on speaker frame
- Chassis protects circuitry against plenum dust
- Diagnostics for testing speaker
- Programmable pre-page alert tone

- SIP compliant (see page two for compatible SIP servers and IP phone systems)
- PoE powered (class 3, <13 Watts)
- Paging prioritization
- Plays audio from standard multicast sources
- SIP endpoint or multicast group member
- Red call status LED indicator
- Automatic Noise Canceling (ANC) feature for operation in noisy environments
- VikingÆs proprietary VOX switching eliminates the need for ôPush to Talkö mode
- Selectable auto-answer feature for monitoring
- Compatible with Polycom multicast paging
- Built-in high efficiency 6 Watt class D amplifier
- Can drive up to six 8 ohm analog speakers for greater coverage
- SIP/Multicast: SIP page, SIP page and zoned multicast receive
- Support for access code to prevent unwanted SIP calls
- Hangs up on: busy signal, time-out, or touch tone command
- Network remote speaker volume control
- Mounting: Magnetically attach to speaker magnet or fasten to the 25/70V transformer mounting holes on speaker frame
- Chassis protects circuitry against plenum dust
- Automatic Gain Control (AGC) to automatically increase ring volume to compensate for ambient noise
- Diagnostics for testing microphone and speaker
- Programmable pre-page alert tone

-5 inch paging horn
Built-in 1.5 watt power amplifier
Infrared remote control detector
Digital volume control
Users set their own volume levels to suit the noise levels in the area
Allows users to totally mute the speaker
Audible feedback

- 8 inch paging speaker
- Built-in 1.5 watt power amplifier
- Infrared remote control detector
- Integrated digital volume control
- Users set their own volume levels to suit the noise levels in the room
- Allows users to totally mute the speaker
- Audible feedback

Built-in high resolution analog NTSC color video camera with wide viewing angle, tilt/swivel adjustments and wide operating temperature: -40¦F to 140¦F
Built-in 125KHz 26-bit Wiegand proximity card reader with LED, beep card read confirmation, and EWP board protection
Compatible with the following Viking Proximity Cards and Fobs: PRXC, PRX-C-ISO, PRX-FOB and LRT-4 (DOD# 198 & 226)
Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics, heavy duty metal keypad and T-10 Torx security mounting screws.
Weather Resistant Features: Marine grade 316 stainless steel faceplate and screws. Internally sealed keypad. Mylar speaker. Selfdraining mic mount. Faceplate, keypad, mic and speaker gaskets.
Designed to meet IP66 Ingress Protection Rating (see DOD 859)
Operates on 12 to 24 volts AC/DC
12 speed dial buttons (22 digits each)
12 alternate number positions (22 digits each)
One button operation (no call button)
Hang up on CPC, busy, silence, time-out or dial tone
Touch tone restriction from microphone
Integral relays for camera control and door strike
Works with C-1000B for increased security
Works with C-3000 for ôNo COö (phone line) operation
50 keyless entry codes
Postal lock input

Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics. Speaker/mic screen. Heavy duty metal keypad buttons and T-10 Security Torx drive mounting screws.
Weather Resistant Features: Marine grade 316 stainless steel faceplate and screws. Keypad internally sealed per IP67. Mylar speaker. Self-draining mic mount. Faceplate, mic and speaker gaskets.
Two sets of SPDT 2 Amp relay contacts for door/gate or camera control
Optional RC-4A for Secure Remote Relay Control, see DOD# 582
Blue ôCall /Statusö LED indicator
SIP compliant (see pg 2 for list of compatible IP-PBX phone systems)
PoE powered (class 2, <6.5 watts)
Automatic Noise Canceling (ANC) feature for operation in noisy environments
VikingÆs proprietary VOX switching eliminates the need for ôPush to Talkö mode
Network downloadable firmware
26 Bit Wiegand input for optional proximity card readers, see DOD# 221 & 228
Programmable to speed dial up to 12 numbers
Cycles to roll over phone number on busy or no-answer
Program up to 1,000 keyless entry codes and/or proximity card numbers
Keyless entry codes and proximity card numbers can be programmed to only allow access at specific times and day of week
Event logging with time and date stamp
Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD# 859
Hangs up on busy signal, time-out or touch tone command
Remotely programmable
Extended temperature range (-40¦F to 140¦F)
Programmable volume adjustments for microphone and speaker
Selectable auto-answer feature for monitoring
Zinc plated steel rough-in box included
Optional VE-5x10 Surface Mount Box available, see DOD #424
Optional VE-LIGHT kit to illuminate the front panel at night, see DOD# 428
Self diagnostics (testing: com, mic, speaker, and switch)

Built-in 125KHz 26-bit Wiegand proximity card reader with LED, beep card read confirmation, and EWP board protection
Compatible with the following Viking Proximity Cards and Fobs: PRX-C, PRX-C-ISO and PRX-FOB (DOD# 198)
Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics, heavy duty metal keypad and T-10 Torx Security mounting screws.
Weather Resistant Features: Marine grade 316 stainless steel faceplate and screws. Internally sealed keypad. Mylar speaker. Self-draining mic mount. Faceplate, keypad, mic and speaker gaskets.
Designed to meet IP66 Ingress Protection Rating (see DOD 859)
Operates on 12 to 24 volts AC/DC
12 speed dial buttons (22 digits each)
12 alternate number positions (22 digits each)
One button operation (no call button)
Hang up on CPC, busy, silence, time-out or dial tone
Touch tone restriction from microphone
Integral relays for camera control and door strike
Works with C-1000B for increased security
Works with C-3000 for ôNo COö (phone line) operation
50 keyless entry codes
See model K-1205 for integral camera
Postal lock input

- Built-in high resolution color video camera with wide viewing, tilt/swivel adjustments and wide operating temperature of -30 degrees F to 150 degrees F
- Operates on 12 to 24V AC/DC
- 12 speed dial buttons (22 digits each)
- One button operation (no call button)
- Hang-up on CPC, busy, silence, time-out, or dial tone return
- Touch tone restriction from microphone
- Integral relays for camera control and door strike
- Works with C-1000B for

Built-in high resolution analog NTSC color video camera with wide viewing angle, tilt/swivel adjustments and wide operating temperature: -40¦F to 140¦F
Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics. Speaker/mic screen. Heavy duty metal keypad buttons and T-10 Security Torx drive mounting screws.
Weather Resistant Features: Marine grade 316 stainless steel faceplate and screws. Keypad internally sealed per IP67. Mylar speaker. Self-draining mic mount. Faceplate, mic and speaker gaskets.
Two sets of SPDT 2 Amp relay contacts for door/gate or camera control
Optional RC-4A for Secure Remote Relay Control, see DOD# 582
Blue ôCall /Statusö LED indicator
SIP compliant (see pg 2 for list of compatible IP-PBX phone systems)
PoE powered (class 2, <6.5 watts)
Automatic Noise Canceling (ANC) feature for operation in noisy environments
VikingÆs proprietary VOX switching eliminates the need for ôPush to Talkö mode
Network downloadable firmware
26 Bit Wiegand input for optional proximity card readers, see DOD# 221 & 228
Programmable to speed dial up to 12 numbers
Cycles to roll over phone number on busy or no-answer
Program up to 1,000 keyless entry codes and/or proximity card numbers
Keyless entry codes and proximity card numbers can be programmed to only allow access at specific times and day of week
Event logging with time and date stamp
Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD# 859
Hangs up on busy signal, time-out or touch tone command
Remotely programmable
Extended temperature range (-40¦F to 140¦F)
Programmable volume adjustments for microphone and speaker
Selectable auto-answer feature for monitoring
Zinc plated steel rough-in box included