Shop by Brand: Viking Electronics

- Phone line powered
- Excellent line balance
- Optional PS-2 power supply for switched power

- Ten available tones, organized into two groups of five tones
- Contact initiated
- Built-in background audio source fade-in/out
- Priority ANSI compliant evacuation and siren tones
- Telephone recording disclosure tone repeats every 15 seconds
- Siren
- Interrupted 784Hz tone
- Door Chime ( Ding-Dong)
- Warble (Electronic Ring)
- Double Gong
- Evacuation Whoop (ANSI/NFPA compliant, temporal slow whoop)
- Telephone Recording Disclosure Tone (500ms beep, every 15 seconds)
- Double Chime
- Quadruple Chime
- Double Buzz

- Touch Tone control of four zones (expandable to 8 zones)
- Switches line level signal to amplifiers or amplified signal to speakers (amplifier(s) not included)
- Balanced audio circuitry for low noise
- Night bell warble with adjustable level from contact closure or ringing analog line
- Input provided for background music
- Separate paging and background music level adjustments
- Background music automatically mutes in paged zone(s) in all but single amplifier mode
- All-call and five group call patterns, selected by Touch Tones
- Adjustable page alert tone level
- Interfaces with ringing C.O. lines, Centrex lines, paging ports, unused phone system trunk inputs, or ringing analog station ports
- Disconnects on timeout, silence, or CPC
- Screw terminals for all input and output connnections

- Viking Power Supply
- 120V AC/12V DC
- 2.1mm plug

- Viking AC adapter
- Power Supply:PS-1
- Power:120V AC/13.8V AC
- Part #:L120700
- Description: No plug (hardwired)
- Power Supply:PS-1A
- Power:120V AC/13.8V AC
- Part #:L120710
- Description: With 2.1mm plug

- Boosts ring to 12 REN
- Caller ID compatible
- Easy modular installation
- Compatible with distinctive ringing services
- Will not affect normal line operation
- Reshapes troublesome square wave ringing
- Capable of boosting talk battery and loop current

- Loud ringing from an analog line
- Loud ringing from a dry contact closure
- Choose one of four ringing sounds:
- Electronic warble (traditional loud ringer)
- Double gong (two identical

- Whole house/small business paging from existing phones
- Built-in two-watt mono paging amplifier with gain control
- Phone to phone intercom
- Page from several different phone lines by connecting multiple units
- Music on hold
- Caller on hold
- Can provide background music from an external source
- Background music mate (automatic during paging or touch tone selectable while you are on a call)
- Selectable loud ringing (electronic warble over speakers)
- Doorbell switch input (lighted or non-lighted) for activating door chime (ding-dong sound over speakers)
- Unique front and back door chimes when used with a C-1000B or C-2000B doorbox controllers
- Switch selectable On-Hold alarm tones
- Stereo pre-amp input and line level output for use with receivers and high wattage amplifiers
- Simple control commands - no touch tone programming
- Page trigger output (12V signal for enabling paging source input on multi-source amps)
- Pre-amp volume control
- Bypass code - ignores all touch tones on next off-hook allowing you to steer through auto attendants, etc.
- Comes complete with power supply

-Non-volatile E² memory (no batteries required)
Compatible with analog phones
Compatible with Viking E-series and K-series phones
Dials up to five 1-20 digit phone numbers
Cycles thru phone numbers until answered
Programmable max call timer
Local and remote Touch Tone programming
Ring-thru allows calling into the phone
Call status LED indicator
12V DC adapter included

- Up to 250 tenants
- Program and control with a Touch Tone phone
- Use with any 26 bit Wiegand device
- Supports 1 entry point
- Compatible with any Viking modles PROX-2, PROX-2 and HID-2
- Non-volatile memory (no batteries required)
- LOG BUS data output for logging entry events
- Card plus keypad mode for highest security
- One time codes for visitors
- Bi-directional (entry and exit) control

- Viking vandal resistant mount box
- Mounts to standard single gang box
- Mounts directly to the wall
- Black powder painted steel
- Weather resistant
- Mounts to model VE-GNP or VE-GNP-2 gooseneck pedestal

- Surface mounting the K-1500-7, K-1900-7, and K-1900-8
- Mounts to a standard single gang box
- Mounts directly to a wall or a VE-GNP or VE-GNP-2 gooseneck pedestal

- Viking time delay relay device
- Time delay mode: programmable to produce one of 8 closure times
- Trigger 1 input can be programmed to accept either a dry contact closure or positive/negative going logic level voltage.
- Delay on Operate mode delays an input trigger by a programmed interval
- 8 Delay times available, from 1 to 30 seconds
- 1 Double pole, double throw relay output
- 8 Selectable closure times
- DIP switch programmable
- Accepts positive or negative going logic level voltage or contact
- Selectable time delay
- Screw terminal connections
- LED relay status indicator

- Phone line powered
- Non-volatile E2 memory
- Compatible with Touch Tone or rotary phones
- .5 to 49.5 minute call timer with disconnect
- Programmable allow or restrict table stores up to forty 12-digit phone numbers, prefixes, or area codes
- 6 digit bypass code for single call override
- Programmable to ignore phone system line access numbers
- Programmable ignore table stores up to twelve 12-digit phone numbers, ideal for *67, *69, etc.
- Programmable maximum digit string length
- Concealed in a standard RJ11C jack
- Allow or restrict 1-800 numbers
- Operational alert tones
- Allows emergency and toll free numbers

- K-1500-6A: Now with heavy duty hookswitch and 14 gauge stainless steel faceplate
- Operates on C.O. lines or analog PABX/KSU stations
- Flush mounts to a standard double gang box

- New high output speaker amplifier with volume adjustment POT
- Microphone volume adjustment POT
- 24V talk battery
- 20Hz ring generator (3.0 REN ring load maximum)
- Selectable number of rings (2, 3, 10, or 30)
- Extended operating temperature range: -15 degrees F to 130 degrees F
- Compact 45 degree terminal strip for easy wiring
- Optional Enhanced Weather Protection (VK-W-1000-EWP)

- Vandal resistan, 14-gauge stainless steel faceplate
- Heavy-duty metal push button and mounting gasket
- Flush mount using the included rough-in box or surface mount using an optional VE-5x5 backbox
- Yellow call progress/night light LED
- New high output speaker amplifier with volume adjustment POT
- Microphone volume adjustment POT
- 24V talk battery
- 20 Hz ring generator (3.0 REN ring load maxiumum)
- Selectable ring cadence (standard or 2 short rings)
- Selectable number of rings (2, 3, 10, or 30)
- Selectable

- Displays ôringingö, ôon-the-phoneö or ômessage waitingö
- LED visible up to 100 ft (30m)
- Power supply included
- Attractive new compact package
- Connects with a modular cord
- Special ôTö adapter provided for handset applications
- Easy to install
- Power: 120VAC / 12VDC 500mA, UL listed adapter provided
- Dimensions: 76mm x 112mm x 36mm (3.0ö x 4.4ö x 1.4ö)
- Shipping Weight: 0.68kg (1.5lbs)
- Environmental: 0¦C to 32¦C (32¦F to 90¦F) with 5% to 95% non-condensing humidity
- Light: 19mm (0.75ö) red LED
- Visiblity: 30m (100 ft) typical
- Message Waiting Voltage: 90V - 125V
- Connections: (1) RJ11 jack,(4) cage clamp screw terminals
- Great for:
- Households
- Call centers
- Telemarketing
- Product support groups
- Office cubicles
- CO based voice messaging
- Purchasing departments
- Sales offices

- Bright flashing ring indication LEDÆs visible over 100 feet
- Loud ringing from an analog line
- Loud ringing from a dry contact closure
- Choose one of four ringing sounds:
- Electronic warble (traditional loud ringer)
- Double gong (two identical ôgongö tones)
- Quadruple chime (four descending chime tones)
- Electronic Bell
- Adjustable volume control
- Provides a door chime tone for either a door bell, a door open sensor, or a ôPush for Assistanceö button
- Test button for setting volume
- External 8-Ohm speaker can be added
- Power supply included

EWP products feature foam rubber gaskets and boots, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards
Self diagnostic reports via email (testing com, mic, speaker & switch)
Automatic polling and programming software included
2 Amp relay contacts for door/gate or SL-2 strobe light control
SIP compatible (see pg 2 for list of compatible IP-PBX phone systems)
PoE powered (class 1, <4 watts)
Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
Network downloadable firmware
Meets ADA requirements for Emergency Phones:
- Automatically lights the ôCall Connected" LED
- Transmits a unique location I.D. code or voice announcement
- Grade 2 Braille label for the visually impaired
Non-volatile digital voice announcer with 28 seconds of voice memory
Handsfree operation
Marine grade 316 stainless steel prevents corrosion on the stainless steel models
Dials up to 5 emergency numbers
E-1600-20-IP and E-1600-52-IP dial up to 5 non-emergency ôINFOö numbers
Cycles through backup phone numbers on busy or no-answer
Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating
Hangs up on busy signal, time-out or touch tone command
Remotely programmable
Extended temperature range (-15¦F to 130¦F)
11 different chassis or board only available
Available in 42ö tower phone model E-1600-BLT-IP-EWP (DOD# 217)

Self diagnostic reports via email (testing com, mic, speaker & switch)Automatic polling and programming software included2 Amp relay contacts for door/gate or SL-2 strobe light controlSIP compatible (see pg 2 for list of compatible IP-PBX phone sysems)PoE powered (class 1, <4 watts)Automatic Noise Canceling (ANC) feature for proper operation in noisy environmentsVoIP eliminates the need for "Push to Talk" modeNetwork downloadable firmwareMeets ADA requirements for Emergency Phones:- Autically lights the "Call Connected" LED- Transmits a unique location I.D. code or voice announcement- Grade 2 Braille label for the visually impairedNon-volatile digital voice announcer with 28 seconds of voice memoryHandsfree operationMarine ge 316 stainless steel prevents corrosion on the stainless steel modelsDials up to 5 emergency numbersE-1600-20-IP and E-1600-52-IP dial up to 5 non-emergency "INFO" numbersCycles through backup phone numbers on busy or no-answerOptional Enhanced ather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD# 859Hangs up on busy signal, time-out or touch tone commandRemotely programmableExtended temperature range (-30F to 130F)11 different chassis or brd only availableAvailable in 42" tower phone model E-1600-BLTIPEWP (DOD# 217)Optional PB-100 Polling System available (DOD# 232)Optional SL-2 or BLK-4-EWP strobe light kit available (DOD# 242/653)Optional E-1600A-MK-GNP Pedestal Mounting Kit (DO 227)

Self diagnostic reports via email (testing com, mic, speaker & switch)
Automatic polling and programming software included
2 Amp relay contacts for door/gate or SL-2 strobe light control
SIP compliant (see pg 2 for list of compatible IP-PBX phone systems)
PoE powered (class 1, <4 watts)
Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
VoIP eliminates the need for ôPush to Talkö mode
Network downloadable firmware
Meets ADA requirements for Emergency Phones:
- Automatically lights the Red ôCall Connectedö LED
- Transmits a unique location I.D. code or voice announcement
- Grade 2 Braille label for the visually impaired
Non-volatile digital voice announcer with 28 seconds of voice memory
T-10 Torx Security Screws for added security
Handsfree operation
Marine grade 316 stainless steel prevents corrosion on the stainless steel models
Laser etched graphics on stainless steel models
Dials up to 5 emergency numbers
E-1600-20-IP, E-1600-22-IP, E-1600-52-IP, and E-1600-TP2IPEWP dial up to 5 non-emergency ôINFOö numbers
Cycles through backup phone numbers on busy or no-answer
Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD# 859
Hangs up on busy signal, time-out or touch tone command
Remotely programmable
Extended temperature range (-30¦F to 130¦F)
11 different chassis or board only available

- Self diagnostic reports via email (testing com, mic, speaker, and switch)
- Automatic polling and programming software included
- SIP compatible (see page 2 for list of compatible IP-PBX phone systems)
- PoE powered (class 1, <4 watts)
- Automatic Noise Canceling (ANC) for operation in noisy environments
- VoIP eliminates the need for ôPush to Talkö mode
- Network downloadable firmware
- Meets ADA requirements for Emergency Phones:
- Automatically lights the ôCall Connectedö LED
- Transmits a location I.D. or voice announcement
- Grade 2 Braille label for the visually impaired
- Non-volatile digital voice announcer with 28 seconds of voice memory
- Handsfree operation
- Marine grade 316 stainless steel prevents faceplate / push button corrosion
- Dials up to 5 emergency numbers
- E-1600BLT2IPEWP and E-1600AST2IPEWP can also dial up to 5 additional non-emergency ôINFOö numbers
- Cycles through backup phone numbers on busy or no-answer
- Comes standard with Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD# 859
- Hangs up on busy signal, time-out or touch tone command
- Remotely programmable
- Extended temperature range (-40¦F to 140¦F)
- Optional PB-100 Polling System available (DOD# 232)

- PoE powered (class 3, <13 Watts)
- Use with an optional BTR-3 wireless remote to activate calls or adjust speaker volume
- Paging prioritization
- Plays audio from multicast
- SIP endpoint or multicast group member
- Supports up to 10 multicast paging groups
- Add an optional SL-2 blue, green, red or amber strobe light (see DOD 242)
- Blue call status LED indicator
- SIP compliant (see product manual for list of compatible IP-PBX phone systems)
- Automatic Noise Canceling (ANC) feature for operation in noisy environments
- VikingÆs proprietary VOX switching eliminates the need for ôPush to Talkö mode
- Selectable auto-answer feature for monitoring
- Autoprovisioning via Viking programming software
- Built-in high efficiency 6 watt class D amplifier
- Relay for activating door locks, strobe lights, external amplifiers, etc.
- SIP / Multicast: SIP page, SIP page and zoned multicast stream, zoned multicast receive
- Support for access code to prevent unwanted SIP calls
- Line-level audio output for connecting to an external amplifier
- Hangs up on: busy signal, time-out, or touch tone command
- Network remote speaker volume control
- Can drive additional external analog speakers for greater coverage
- Mounting: Blind mounts into 9.5? hole, clearance requirement of 3.45? (87.3mm) above 0.5? gypsum board ceiling
- Heavy duty back box protects speaker and circuitry against plenum dust
- Automatic Gain Control (AGC) to automatically increase ring volume to compensate for ambient noise
- Diagnostics (for testing mic, speaker & relay)

EWP products feature foam rubber gaskets and boots, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards
Self diagnostic reports via email (testing com, mic, speaker & switch)
Automatic polling and programming software included
2 Amp relay contacts for door/gate or SL-2 strobe light control
SIP compatible (see pg 2 for list of compatible IP-PBX phone systems)
PoE powered (class 1, <4 watts)
Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
Network downloadable firmware
Meets ADA requirements for Emergency Phones:
- Automatically lights the ôCall Connected" LED
- Transmits a unique location I.D. code or voice announcement
- Grade 2 Braille label for the visually impaired
Non-volatile digital voice announcer with 28 seconds of voice memory
Handsfree operation
Marine grade 316 stainless steel prevents corrosion on the stainless steel models
Dials up to 5 emergency numbers
E-1600-20-IP and E-1600-52-IP dial up to 5 non-emergency ôINFOö numbers
Cycles through backup phone numbers on busy or no-answer
Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating
Hangs up on busy signal, time-out or touch tone command
Remotely programmable
Extended temperature range (-15¦F to 130¦F)
11 different chassis or board only available

- Discreet compact design
- Built-in microphone for silent monitoring
- Automatic polling and programming software included
- 2 Amp relay contacts for SL-2 strobe light control, etc.
- SIP compliant (see DOD 944) for list of compatible phone systems and cloud providers
- Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging
- PoE powered (class 1, <4 Watts)
- Automatic Noise Canceling (ANC) feature for proper operation in noisy areas
- VoIP eliminates the need for ôPush to Talkö mode
- Network downloadable firmware
- Non-volatile digital voice announcer with 28 seconds of voice memory
- Handsfree operation
- Dials up to 5 emergency numbers
- Cycles through backup phone numbers on busy or no-answer
- Hangs up on busy signal, time-out or touch tone command
- Extended temperature range (-40¦F to 140¦F)
- Optional PB-100 Polling System available (DOD 232)
- Optional SL-2 or BLK-4-EWP strobe light kit available (DOD 242/654)
- Diagnostics for testing microphone, speaker, and relay
- Also available with analog telecom interface, see PB-3 for more information (DOD 239)

EWP products feature foam rubber gaskets and boots, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards
Self diagnostic reports via email (testing com, mic, speaker & switch)
Automatic polling and programming software included
2 Amp relay contacts for door/gate or SL-2 strobe light control
SIP compatible (see pg 2 for list of compatible IP-PBX phone systems)
PoE powered (class 1, <4 watts)
Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
Network downloadable firmware
Meets ADA requirements for Emergency Phones:
- Automatically lights the ôCall Connected" LED
- Transmits a unique location I.D. code or voice announcement
- Grade 2 Braille label for the visually impaired
Non-volatile digital voice announcer with 28 seconds of voice memory
Handsfree operation
Marine grade 316 stainless steel prevents corrosion on the stainless steel models
Dials up to 5 emergency numbers
E-1600-20-IP and E-1600-52-IP dial up to 5 non-emergency ôINFOö numbers
Cycles through backup phone numbers on busy or no-answer
Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating
Hangs up on busy signal, time-out or touch tone command
Remotely programmable
Extended temperature range (-15¦F to 130¦F)
11 different chassis or board only available
Available in 42ö tower phone model E-1600-BLT-IP-EWP (DOD# 217)

Self diagnostic reports via email (testing com, mic, speaker & switch)
Automatic polling and programming software included
2 Amp relay contacts for door/gate or SL-2 strobe light control
SIP compatible (see pg 2 for list of compatible IP-PBX phone systems)
PoE powered (class 1, <4 watts)
Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
Network downloadable firmware
Meets ADA requirements for Emergency Phones:
- Automatically lights the ôCall Connected" LED
- Transmits a unique location I.D. code or voice announcement
- Grade 2 Braille label for the visually impaired
Non-volatile digital voice announcer with 28 seconds of voice memory
Handsfree operation
Marine grade 316 stainless steel prevents corrosion on the stainless steel models
Dials up to 5 emergency numbers
E-1600-20-IP and E-1600-52-IP dial up to 5 non-emergency ôINFOö numbers
Cycles through backup phone numbers on busy or no-answer
Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating
Hangs up on busy signal, time-out or touch tone command
Remotely programmable
Extended temperature range (-15¦F to 130¦F)
11 different chassis or board only available

Self diagnostic reports via email (testing com, mic, speaker & switch)
Automatic polling and programming software included
2 Amp relay contacts for door/gate or SL-2 strobe light control
SIP compatible (see pg 2 for list of compatible IP-PBX phone systems)
PoE powered (class 1, <4 watts)
Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
Network downloadable firmware
Meets ADA requirements for Emergency Phones:
- Automatically lights the ôCall Connected" LED
- Transmits a unique location I.D. code or voice announcement
- Grade 2 Braille label for the visually impaired
Non-volatile digital voice announcer with 28 seconds of voice memory
Handsfree operation
Marine grade 316 stainless steel prevents corrosion on the stainless steel models
Dials up to 5 emergency numbers
E-1600-20-IP and E-1600-52-IP dial up to 5 non-emergency ôINFOö numbers
Cycles through backup phone numbers on busy or no-answer
Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating
Hangs up on busy signal, time-out or touch tone command
Remotely programmable
Extended temperature range (-15¦F to 130¦F)
11 different chassis or board only available

Self diagnostic reports via email (testing com, mic, speaker & switch)
Automatic polling and programming software included
2 Amp relay contacts for door/gate or SL-2 strobe light control
SIP compatible (see pg 2 for list of compatible IP-PBX phone systems)
PoE powered (class 1, <4 watts)
Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
Network downloadable firmware
Meets ADA requirements for Emergency Phones:
- Automatically lights the ôCall Connected" LED
- Transmits a unique location I.D. code or voice announcement
- Grade 2 Braille label for the visually impaired
Non-volatile digital voice announcer with 28 seconds of voice memory
Handsfree operation
Marine grade 316 stainless steel prevents corrosion on the stainless steel models
Dials up to 5 emergency numbers
E-1600-20-IP and E-1600-52-IP dial up to 5 non-emergency ôINFOö numbers
Cycles through backup phone numbers on busy or no-answer
Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating
Hangs up on busy signal, time-out or touch tone command
Remotely programmable
Extended temperature range (-15¦F to 130¦F)
11 different chassis or board only available

Self diagnostic reports via email (testing com, mic, speaker & switch)
Automatic polling and programming software included
2 Amp relay contacts for door/gate or SL-2 strobe light control
SIP compatible (see pg 2 for list of compatible IP-PBX phone systems)
PoE powered (class 1, <4 watts)
Automatic Noise Canceling (ANC) feature for proper operation in noisy environments
Network downloadable firmware
Meets ADA requirements for Emergency Phones:
- Automatically lights the ôCall Connected" LED
- Transmits a unique location I.D. code or voice announcement
- Grade 2 Braille label for the visually impaired
Non-volatile digital voice announcer with 28 seconds of voice memory
Handsfree operation
Marine grade 316 stainless steel prevents corrosion on the stainless steel models
Dials up to 5 emergency numbers
E-1600-20-IP and E-1600-52-IP dial up to 5 non-emergency ôINFOö numbers
Cycles through backup phone numbers on busy or no-answer
Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating
Hangs up on busy signal, time-out or touch tone command
Remotely programmable
Extended temperature range (-15¦F to 130¦F)
11 different chassis or board only available