- Includes (1) SA-IR infrared remote control
- Easy to install - Drive up to 25 self amplified speakers - Separate volume controls for auxiliary input, paging, ringing tones, and background music - Choose from up to 4 loud ringing sounds - Provides lound ringing or night bell - Night transfer switch input - Page from a ringing C.O. line, centrex line, paging port, unused phone system trunk input (FXO), or ringing analog station port (FXS) - Can provide background music from an external source - 600 Ohm ouput to cascade to additional units - Use multiple units to drive more self amplified speakers - Expandable 12 speakers at a time with the Viking model SA-X12 expander/adapter |
- Viking expander/adapter
- Converts any paging audio source (600 ohm, 4 ohm, 8 ohm, 16 ohm, 25 volt, or 70 volt) - to Viking's proprietary SA Series 2 wire protocol - Power up to twelve (12) SA-1S and/or SA-1H self amplified paging speakers |
-12 Minutes of Flash message memory
- Up to 8 different messages (Day, Night, 5 menu messages and Goodbye) - Local and Remote programming/message recording using a standard Touch Tone phone - Optional audio input jack for recording from an external source (Tape, CD, PC, etc.) - Programmable 4 digit code to bypass greeting and Ring through - Programmable Store and Forward Caller ID - Distinctive Ring Transfer with 4 ring patterns - Programmable Automatic ring through after greeting - Call progress detection for automatic hang-up on CPC, busy signal, or time out - Music On Hold input - 90V Message Playing signal for visual indication - Message and MOH volume controls - Programmable Ring Delay, Maximum Ring Count, Maximum On-Hold Time and Max Message playback time - Surge protection for power and phone line |
Single Line Paging Controller with 4 Audio Chimes/Messages
Add whole-house paging, loud ringing, phone-to-phone intercom, and door chimes to your multi-room audio system Select 4 CD-quality sounds from a library of 8 recordings or record your own sounds into the USB port When the doorbell switch is pressed, background music is muted while the chime plays Connects with a single existing phone line Built-in 2 watt amplifier Pre-amplifier output Music on hold input Intercom features Compatible with C-200, C-1000B, and C-2000A Nearly 6 minutes of recorded audio storage Powered by 120V AC/13.8V AC, 1.25A adapter Powers up to three 8 ohm speakers and sixteen 45 ohm speakers |
-Large 10-inch diameter horn
-Fully adjustable mounting hardware included -Quick and easy installation -SIP compliant -PoE powered (class 3, <13 Watts) -Paging prioritization -Plays audio from standard multicast sources -SIP endpoint or multicast group member -Red call status LED indicator -Automatic Noise Canceling (ANC) feature for operation in noisy environments -Compatible with Polycom multicast paging -Built-in high-efficiency 6 Watt class D amplifier -SIP/Multicast: SIP page, SIP page and zoned multicast receive -Support for access code to prevent unwanted SIP calls -Hangs up on: busy signal, time-out, or touch tone command -Network remote speaker volume control -Programmable pre-page alert tone |
SIP Loud Ringer with Visual Ring Indication
PoE-powered audio device for providing loud ring and visual ring inidcation for SIP VoIP phone systems Four programmable ring patterns Programmable Automatic Gain Control (AGC), which automatically compensates the ring volume for background ambient noise Applications - use the loud ringer for noisy or variable noise environments and the visual ring indicator for quiet areas 2 Amp relay contacts for LPL-1 or SL-2 strobe light control SIP compliant Class 2 PoE with consumption <6.5W Network downloadable firmware Surface mounts to a single gang or 4 |
- PoE powered (class 2, <6.5 watts)
- Paging prioritization - Plays audio from multicast - SIP endpoint or multicast group member - Supports up to 10 multicast paging groups - Red ôPage/Statusö LED indicator - SIP compliant - Network downloadable firmware - Autoprovisioning via Viking programming software - Built-in high efficiency 4 watt class D amplifier - Relay for activating door locks, strobe lights, external amplifiers, etc. - SIP/Multicast: SIP page, SIP page and zoned multicast stream, zoned multicast receive - Support for access code to prevent unwanted SIP calls - Line-level audio output for connecting to an external amplifier - Network remote volume control - Can drive additional external analog speakers for greater coverage |
- Large 10-inch diameter horn
- Fully adjustable mounting hardware included - Quick and easy installation - SIP compliant (see the Product Manual for list of compatible IP-PBX phone systems) for more information - PoE powered (class 3, <13 Watts) - Paging prioritization |
-Large 10-inch diameter horn
-Fully adjustable mounting hardware included -Quick and easy installation -SIP compliant, see page 2 of the product manual for more information -PoE powered (class 3, <13 Watts) -Paging prioritization -Plays audio from standard multicast sources -SIP endpoint or multicast group member -Red call status LED indicator -Automatic Noise Canceling (ANC) feature for operation in noisy environments -Proprietary VOX switching eliminates the need for ôPush to Talkö mode -Selectable auto-answer feature for monitoring -Compatible with Polycom multicast paging -Built-in high-efficiency 6 Watt class D amplifier -SIP/Multicast: SIP page, SIP page and zoned multicast receive -Support for access code to prevent unwanted SIP calls -Hangs up on: busy signal, time-out, or touch tone command -Network remote speaker volume control -Automatic Gain Control (AGC) to automatically increase ring volume to compensate for ambient noise -Diagnostics for testing microphone and horn driver -Programmable pre-page alert tone |
- Alternate action call button to place or cancel a call
- Intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out - Telephone line powered - Weather resistant features: mylar speaker, gaskets, internally sealed push button switch, UV stable exterior, enamel coated PCB - Optional Enhanced Weather Protection (EWP) available for greater weather resistance - Adjustable microphone and speaker volume - Programmable maximum call length - Selectable auto-answer feature allows remote monitoring - Two way handsfree communication - Programmable VOX (mic/speaker) switching speed - Light gray colored, impact resistant, U.V. stable, plastic chassis - Surface mountable only |
The SV-5W is a single speaker volume control designed to be mounted into a single gang rough-in box. The SV-5W is ideal for controlling the volume of ceiling mounted speakers in conference rooms and private offices, where the occupants may choose to hear pages, lower the ambient noise level, or turn the speaker off completely.
The SV-5W comes complete with wire nuts for easy installation. Applications: conference rooms, private offices |
- Viking outdoor speakerphone with EWP
- Provides convenient handsfree communication - Telephone line powered speakerphones designed to provide two way handsfree communication - When call button is pressed, the unit will come off-hook and will remain off-hook until a CPC signal is detected, the programmed timeout has elapsed, a busy signal is detected, or the call goes silent, making the unit automatically disconnect - Can be connected directly toa C.O. line or analog PABX/KSU station when programmed as a ringdown circuit, or used with a Vikinghot-line dialer. If a line or station is not available, Viking's DLE-200B ring down circuit can be used - 1-4 speakerphones can share an existing phone line in a house or small business when used with a Viking C-2000A (respectively) Entry Phone Controller - Enhanced weather protection - Rubber gaskets and boots, closed cell foam gasketing, hand soldered silicon sealed connections, anti-corrosive gel filled tip and ring connectors, as wellas urethane encapsulated circuit boards with internally sealed, field-adjustable trim POTS and DIP switches - Applications: commercial, industrial and residential door security, door or gate communication, business delivery entrances - Use in conjunction with a Viking K-1900-5 Dialer on C.O. lines or analog PABX/KSU stations - Use on any programmed ringdown circuit of an analog PABX/KSU station - Alternate action call button to place or cancel a call - Intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out - Telephone line powered - Weather resistant features: mylar speaker, gaskets, internally sealed push button switch, UV stable exterior, enamel coated PCB - Adjustable microphone and speaker volume - Programmable maximum call length - Selectable auto-answer feature allows remote monitoring - Two way handsfreecommunication - Programmable VOX (mic/speaker)switching speed - Impact resistant, U.V. stable, plastic chassis - Light gray - Surface mountable only |
- 2.5" square 100 Ohm speaker with 26 AWG wires (replaces Q170200), compatible with:
- E-10A - E-10A-EWP - E-30 - E-30-EWP - E-30-PT - E-30-PT-EWP - E-1600A - E-1600A-EWP - E-1600-02A - E-1600-02A-EWP - E-1600-20A - E-1600-20A-EWP - E-1600-50A - E-1600-50A-EWP - E-1600-52A - E-1600-52A-EWP - E-1600-55A - E-1600-55A-EWP - E-1600A-GT-EWP - E-1600A-TP-EWP - E-1600A-TP2-EWP - E-1600A-AST-EWP - E-1600A-AST2EWP - E-1600A-BLT-EWP - E-1600A-BLT2EWP - K-1200 - K-1200-EWP - MSB-30 - MSB-30-EWP - W-1000 - W-1000-EWP - W-3000 - W-3000-EWP |
- Meets ADA requirements for Emergency Phones
Can automatically light the |
- Viking stainless steel handsfree telephone with keypad and enhanced weather protection
- Vandal resistant features: 14 guage, louvered, stainless steel faceplate with stainless steel speaker/mic screen, heavy duty metal keypad and |
- Built-in high resolution color video camera with wide viewing, tilt/swivel adjustment, and wide operating temperature of -30¦F to 150¦F
- Audio and video transmission on one CAT5E cable - Compact size: front panel is the size of a typical double gang midsize wall plate - Mounting: flush mounts in a double gang electrical box (2.25 |
Stainless Steel VoIP Entry Phone
Designed to provide quick and reliable handsfree communication for SIP phone systems with PoE Can be programmed from any touch tone phone or PC on the same LAN Can dial up to 5 programmable numbers Flashes a 'Call' LED when ringing and remains lit after the call is answered PoE powered Applications: gate entrance, parking ramps/lots, ATM machines, medical centers, lobbies, entryways, stadiums, convention centers, public access areas Automatic polling and programming software included Automatic Noise Canceling feature for noisy environments Marine grade 316 stainless steel Hangs up on busy signal, time-out, or touch tone command Flush mountable; surface mount with optional VE-5X5 surface mount box Optional polling system (PB-100) Optional strobe light kit (SL-2 or BLK-4-EWP) |
- Self diagnostic reports via email (testing com, mic, speaker & switch)
- Automatic polling and programming software included - 2 am relay contacts for door/gate or SL-2 strobe light control - Blue |
Push to talk button
Phone line powered Vandal resistant, stainless steel faceplate with heavy-duty metal call buttons Non-volatile E2 memory (no batteries required) Touch Tone or pulse dialing Programmable to dial up to 5 numbers on busy or ring no answer Red off-hook LED indicator Hangs up on CPC, silence, busy signal, return to dial tone, time out or a Touch Tone command Programmable to auto-answer on incoming calls Remotely programmable Extended temperature range (-15¦F to 130¦F) Flush mountable using included plastic rough-in box |
- Handsfree operation
- Phone line powered - Vandal resistant, stainless steel faceplate with heavy-duty metal call button - Non-volatile E2 memory (no batteries required) - Touch Tone or pulse dialing - Programmable to dial up to 5 numbers on busy or ring no answer - Red off-hook LED indicator - Hangs up on CPC, silence, busy signal, return to dial tone, time out or a Touch Tone command - Programmable to auto-answer on incoming calls - Remotely programmable - Extended temperature range (-15¦F to 130¦F) |
- Viking video entry phone with keypad
- Built-in high resolution color video camera with wide viewing, tilt/swivel adjustments and wide operating temperature of -30¦F to 150¦F - Audio and video transmission on one CAT5E cable - Vandal resistant features: 14 gauge louvered stainless steel faceplate with stainless steel speaker/mic screen, heavy duty metal keypad and ôcallö button, impact and scratch resistant camera lens and hex drive mounting screws - Weather resistant features: mylar speaker, faceplate gasket, mic and speaker gasket, internally sealed (IP67) push button switch and keypad, sealed camera lens, potted camera circuit board, stainless steel phone and camera mounting hardware - Optional enhanced weather protection conforms to NEMA requirements - Yellow |
- Adds vandal and weather resistance, as well as versatility to Viking's doorboxes and handsfree phones
- Mounts to a standard single gang box - Mounts directly to the wall - Mounts to model VE-GNP or VE-GNP-2 gooseneck pedestal |
- Viking vandal resistant stainless steel mount box
- Surface mounting the K-1700-3 or K-1705-3 - Attaching the K-1700-3 or K-1705-3 to a VE-GNP or VE-GNP-2 gooseneck pedestal - Mounts to a standard single gang box - Mounts directly to the wall - Mounts to model VE-GNP or VE-GNP-2 gooseneck pedestal |
- Built-in high resolution color video camera with wide viewing, tilt/swivel adjustment, and wide operating temperature of -30¦F to 150¦F
- Audio and video transmission on one CAT5E cable - Compact size: front panel is the size of a typical double gang midsize wall plate - Mounting: flush mounts in a double gang electrical box (2.25 |
- Standard elevator phone box mount
- ALUMINUM - Provides quick and reliable hands free communication over the public switched telephone network. - Meets ADA requirements for elevator telephones, and can be programmed from any touch tone phone. - Automatically send the digital announcement to identify the location of the emergency call, then automatically light the call connected LED. - Uses with Central Station Monitoring equipment. - Parameters, phone numbers and location numbers are stored in non-volatile E2 memory. - Phone line powered, requiring no batteries or external power sources. |
- Viking Electronics entry phone
- Compact size: Front panel is the size of a typical double gang mid- size wall plat - Flush mounts in a double gang electrical box (2.25ö deep x 3.7ö wide x 2.84ö tall minimum) - PNL-40 faceplates: Replacement faceplates with matching screws available in all five standard finishes - Weather Resistant Features: Mylar speaker, faceplate gasket, mic and speaker gasket, internally sealed (IP67) push button switch, self draining mic mountbr />- Vandal Resistant Features: 16 gauge polished brass or 18 gauge stainless steel faceplate, stainless steel push button, stainless steel speaker screen, scratch resistant powder coating, hex drive mounting screws - Blue LED helps locate the push button, indicate ringing and off-hook - Telephone line powered - Microphone and speaker volume controls - Programmable Intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out - Selectable auto answer feature for monitoring - Programmable VOX (mic/speaker) switching speed - Stainless steel - VKE60SS |
-Viking steel rough-in back box
-For vandal resistant handsfree speakerphone (K-1700-3) -Stainless steel automatic dialer panel phone with keypad (K-1900-8) VK258817 |
- Touch-free motion sensor with adjustable range from one to four inches
- Motion sensors ring LED lights blue during idle, flashes green during dialing and lights steady green when call is answered - Automatic polling and programming software included - 2 Amp relay contacts for door/gate or SL-2 Strobe Light control - SIP compliant - Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging - PoE powered (class 1, <4 Watts) - Automatic Noise Canceling (ANC) for proper operation in noisy environments - VoIP eliminates the need for ôPush to Talkö mode - Network downloadable firmware - T-10 Torx security screws for added security - Can be used with optional RC-4A Secure Relay Controller - Marine grade 316 stainless steel prevents corrosion on stainless steel models - Laser etched graphics on stainless steel models - Programmable to dial up to 5 numbers on busy or ring no answer - Cycles through backup phone numbers on busy or no-answer - Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859 - Hangs up on busy signal, time-out or touch tone command - Remotely programmable - Extended temperature range of -40¦F to 140¦F - Volume adjustments for microphone and speaker - Flush mount using the included rough-in box or can be surface mounted using an optional VE-5+5 Surface Mount Box - Diagnostics for testing microphone, speaker, and relay |
- Touch-free motion sensor with adjustable range from one to four inches
- Motion sensors ring LED lights blue during idle, flashes green during dialing and lights steady green when call is answered - Automatic polling and programming software included - 2 Amp relay contacts for door/gate or SL-2 Strobe Light control - SIP compliant - Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging - PoE powered (class 1, <4 Watts) - Automatic Noise Canceling (ANC) for proper operation in noisy environments - VoIP eliminates the need for ôPush to Talkö mode - Network downloadable firmware - T-10 Torx security screws for added security - Can be used with optional RC-4A Secure Relay Controller - Marine grade 316 stainless steel prevents corrosion on stainless steel models - Laser etched graphics on stainless steel models - Programmable to dial up to 5 numbers on busy or ring no answer - Cycles through backup phone numbers on busy or no-answer - Hangs up on busy signal, time-out or touch tone command - Remotely programmable - Extended temperature range of -40¦F to 140¦F - Volume adjustments for microphone and speaker - Flush mounts in a standard double gang electrical ¡¡¡¡¡¡¡¡¡box (not included)¡¡¡¡ - Diagnostics for testing microphone, speaker, and relay |
- Viking surface mount box
- Adds vandal and weather resistance, as well as versatility to the E-40 series entry phones - VE-3x5 backboxes are black powder painted steel - Designed to be mounted to a wall, post, or standard single gang box - Also compatible with EWP versions of the E-40 series - Unit dimensions 4.92 |
- Mounts to a standard single gang box
- Mounts directly to the wall - Surface mounting the E-10A, E-30, E-30-PT, E-35, E-1600-20A, W-1000, or W-3000 - Attaching the E-10A, E-30, E-30-PT, E-35, E-1600-20A, W-1000, W-3000 or W-3005 to a VE-GNP or VE-GNP-2 gooseneck pedestal |
Surface mounts to a wall, post or single gang box
- Mounts to a single or double gang box - VE-5x5, VE-6x7 and VE-5x10 mount to the VE-GNP gooseneck pedestals - Adds weather and vandal resistance - Heavy duty, red powder painted steel |
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |