Built-in 125KHz 26-bit Wiegand proximity card reader with LED, beep card read confirmation, and EWP board protection
Compatible with the following Viking Proximity Cards and Fobs: PRX-C, PRX-C-ISO and PRX-FOB (DOD# 198) Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics, heavy duty metal keypad and T-10 Torx Security mounting screws. Weather Resistant Features: Marine grade 316 stainless steel faceplate and screws. Internally sealed keypad. Mylar speaker. Self-draining mic mount. Faceplate, keypad, mic and speaker gaskets. Designed to meet IP66 Ingress Protection Rating (see DOD 859) Operates on 12 to 24 volts AC/DC 12 speed dial buttons (22 digits each) 12 alternate number positions (22 digits each) One button operation (no call button) Hang up on CPC, busy, silence, time-out or dial tone Touch tone restriction from microphone Integral relays for camera control and door strike Works with C-1000B for increased security Works with C-3000 for ôNo COö (phone line) operation 50 keyless entry codes See model K-1205 for integral camera Postal lock input |
EWP products feature foam rubber gaskets and boots, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards
Built-in 125KHz 26-bit Wiegand proximity card reader with LED and beep card read confirmation and EWP board protection Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics. Speaker/mic screen. Heavy duty metal keypad buttons and T-10 Security Torx drive mounting screws. Weather Resistant Features: Marine grade 316 stainless steel faceplate and screws. Keypad internally sealed per IP67. Mylar speaker. Self-draining mic mount. Faceplate, mic and speaker gaskets. Two sets of SPDT 2 Amp relay contacts for door/gate or camera control Optional RC-4A for Secure Remote Relay Control, see DOD# 582 Blue ôCall /Statusö LED indicator SIP compliant (see pg 2 for list of compatible IP-PBX phone systems) PoE powered (class 2, <6.5 watts) Automatic Noise Canceling (ANC) feature for operation in noisy environments VikingÆs proprietary VOX switching eliminates the need for ôPush to Talkö mode Network downloadable firmware Programmable to speed dial up to 12 numbers Cycles to roll over phone number on busy or no-answer Program up to 1,000 keyless entry codes and/or proximity card numbers Keyless entry codes and proximity card numbers can be programmed to only allow access at specific times and day of week Event logging with time and date stamp Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD# 859 Hangs up on busy signal, time-out or touch tone command Remotely programmable Extended temperature range (-40¦F to 140¦F) Programmable volume adjustments for microphone and speaker Selectable auto-answer feature for monitoring Zinc plated steel rough-in box included |
EWP products feature foam rubber gaskets and boots, sealed connections, gel-filled butt connectors, as well as urethane or thermal plastic potted circuit boards with internally sealed, field-adjustable trim pots and DIP switches for easy on-site programming
Built-in high resolution analog NTSC color video camera with wide viewing angle, tilt/swivel adjustments and wide operating temperature: -40¦F to 140¦F Built-in 125KHz 26-bit Wiegand proximity card reader with LED, beep card read confirmation, and EWP board protection Compatible with the following Viking Proximity Cards and Fobs: PRXC, PRX-C-ISO, PRX-FOB and LRT-4 (DOD# 198 & 226) Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics, heavy duty metal keypad and T-10 Torx security mounting screws. Weather Resistant Features: Marine grade 316 stainless steel faceplate and screws. Internally sealed keypad. Mylar speaker. Selfdraining mic mount. Faceplate, keypad, mic and speaker gaskets. Designed to meet IP66 Ingress Protection Rating (see DOD 859) Operates on 12 to 24 volts AC/DC 12 speed dial buttons (22 digits each) 12 alternate number positions (22 digits each) One button operation (no call button) Hang up on CPC, busy, silence, time-out or dial tone Touch tone restriction from microphone Integral relays for camera control and door strike Works with C-1000B for increased security Works with C-3000 for ôNo COö (phone line) operation 50 keyless entry codes Postal lock input |
Built-in high resolution analog NTSC color video camera with wide viewing angle, tilt/swivel adjustments and wide operating temperature: -40¦F to 140¦F
Built-in 125KHz 26-bit Wiegand proximity card reader with LED and beep card read confirmation and EWP board protection Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics. Speaker/mic screen. Heavy duty metal keypad buttons and T-10 Security Torx drive mounting screws. Weather Resistant Features: Marine grade 316 stainless steel faceplate and screws. Keypad internally sealed per IP67. Mylar speaker. Self-draining mic mount. Faceplate, mic and speaker gaskets. Two sets of SPDT 2 Amp relay contacts for door/gate or camera control Optional RC-4A for Secure Remote Relay Control, see DOD# 582 Blue ôCall /Statusö LED indicator SIP compliant (see pg 2 for list of compatible IP-PBX phone systems) PoE powered (class 2, <6.5 watts) Automatic Noise Canceling (ANC) feature for operation in noisy environments VikingÆs proprietary VOX switching eliminates the need for ôPush to Talkö mode Network downloadable firmware Programmable to speed dial up to 12 numbers Cycles to roll over phone number on busy or no-answer Program up to 1,000 keyless entry codes and/or proximity card numbers Keyless entry codes and proximity card numbers can be programmed to only allow access at specific times and day of week Event logging with time and date stamp Optional Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD# 859 Hangs up on busy signal, time-out or touch tone command Remotely programmable Extended temperature range (-40¦F to 140¦F) Programmable volume adjustments for microphone and speaker Selectable auto-answer feature for monitoring Zinc plated steel rough-in box included |
- Viking handsfree speakerphone
- Vandal Resistant Features: 14 gauge, louvered, stainless steel faceplate with stainless steel speaker/mic screen, heavy duty metal keypad and ôCallö button - Enhanced Weather Protection (EWP) - Yellow ôin useö LED - Volume adjustments for microphone and speaker - Advanced call progress detection: disconnects on busy signal, return to dial tone, CPC reorder tone, maximum call time out and selectable silence time out - Selectable auto-answer feature - Selectable push button disconnect - Zinc plated steel rough-in box with (2) 3/4ö conduit knockouts - Optional VE-6x7 Surface Mount Box available - Selectable maximum call time - Selectable VOX switching speed - Made in the USA - 1 Year manufacturer's warranty |
- Viking vandal resistant entry phone with keypad and enhanced weather protection
- Built in high resolution color video camera with wide viewing, tilt/swivel adjustments and wide operating temperature of -30¦F to 150¦F - Audio and video transmission on one CAT5E cable - Vandal resistant features: 14 gauge louvered stainless steel faceplate with stainless steel speaker/mic screen, heavy duty metal keypad and ôCallö button, impact and scratch resistant camera lens and hex drive mounting screws - Weather resistant features: mylar speaker, faceplate gasket, mic and speaker gasket, internally sealed (IP67) push button switch and keypad, sealed camera lens, potted camera circuit board, stainless steel phone and camera mounting hardware - Yellow ôin useö LED - Volume adjustments for microphone and speaker - Advanced call progress detection: disconnects on busy signal, return to dial tone, CPC reorder tone, maximum call time out and selectable silence time out - Selectable auto-answer feature for monitoring - Selectable push button disconnect - Zinc plated steel rough-in box with (2) 3/4ö conduit knockouts - Optional VE-6x7 surface mount box available - Selectable maximum call time - Selectable VOX switching speed - VKK17053EWP |
- Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics. Speaker/mic screen. Heavy duty metal keypad and ôCallö button. Scratch resistant powder coating (K-1705-BN-IP). T-10 Security Torx drive mounting screws.
- Weather Resistant Features: Marine grade 316 stainless steel faceplate, screws and push button switch. Switch internally sealed per IP67. Mylar speaker. Selfdraining mic mount. Faceplate, mic and speaker gaskets. Weather resistant powder paint (K-1705-BN-IP) - Available in 2 standard finishes: 316 brushed stainless steel with laser etched graphics or oil rubbed bronze powder paint with copper metallic graphics - Built-in high resolution analog NTSC color video camera with wide viewing angle, tilt/swivel adjustments and wide operating temperature: -40¦F to 140¦F - Two sets of SPDT 2 Amp relay contacts for door/gate or camera control - Optional RC-4A for Secure Remote Relay Control, see DOD 582 - Blue ôCall /Statusö LED indicator - SIP compliant (see page 2 for compatible SIP servers and IP phone systems) - PoE powered (class 2, <6.5 watts) - Automatic Noise Canceling (ANC) feature for operation in noisy environments - VikingÆs proprietary VOX switching eliminates the need for ôPush to Talkö mode - Network downloadable firmware - 26 Bit Wiegand input for optional proximity card readers, see DOD 221 and 228 - 26 Bit Wiegand output connect to card reader input of an Access Control System - Programmable to speed dial up to 250 numbers - Cycles to roll over phone number on busy or no-answer - Program up to 1,000 keyless entry codes and/or proximity card numbers - Keyless entry codes and proximity card numbers can be programmed to only allow access at specific times and day of week - Event logging with time and date stamp - Optional Enhanced Weather Protection (EWP) available - EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859 - Hangs up on busy signal, time-out or touch tone command - Remotely programmable - Extended temperature range (-40¦F to 140¦F) - Programmable volume adjustments for microphone and speaker - Selectable auto-answer feature for monitoring - Enhanced Weather Protection (EWP) for outdoor installations where the unit is exposed to precipitation or condensation. EWP products are designed to meet IP66 standards and may feature foam rubber gaskets, sealed connections, gel-filled butt connectors, as well as potted circuit boards. |
- Built-in 125KHz 26-bit Wiegand proximity card reader with LED and beep card read confirmation and EWP board protection
- Built-in high resolution analog NTSC color video camera with wide viewing angle, tilt/swivel adjustments, and operating temperature of -40¦F to 140¦F - Audio and video transmission on one CAT5E cable (see page 6) - Compatible with the following Viking Proximity Cards and Fobs: PRX-C, PRX-C-ISO and PRX-FOB (DOD 198) - Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics, stainless steel ôCallö button, heavy duty metal keypad and T-10 Torx security screws, scratch resistant powder coating (K-1775-3-BN) - Weather Resistant Features: Marine grade 316 stainless steel faceplate, screws and and push button switch. Switch internally sealed per IP67. Mylar speaker. Self-draining mic mount. Faceplate, mic and speaker gaskets. Weather Resisant powder paint (K-1775-3-BN) - K-1775-3-EWP is designed to meet IP66 Ingress Protection Rating (see DOD 859 for more information) - Available in 2 standard faceplate finishes: 316 brushed stainless steel or oil rubbed bronze powder paint - Blue ôin useö LED - Telephone line powered - Volume adjustments for microphone and speaker - Advanced call progress detection: disconnects on busy signal, return to dial tone, CPC, reorder tone, maximum call time out and 40 second silence time out - Selectable auto-answer feature for monitoring - Zinc plated steel rough-in box with (2) 3/4ö conduit knockouts |
- 12 gauge (0.105? thick) 316 stainless steel front panel
- Permanent laser etched graphics - Heavy duty metal hook switch - Armored handset cable - T-10 Security Torx drive mounting screws - Weather Resistant Features: - Marine grade 316 stainless steel faceplate - Marine grade 316 stainless steel Torx security screws - Enhanced Weather Protection designed to meet IP66 Ingress Protection Rating (see DOD 859) - Faceplate, ear piece, and mouth piece gaskets - Ring with adjustable volume and cadence - Hearing aid compatible amplified handset with sealed push button volume control - SPDT 2 Amp relay contacts for door/gate or camera control¡¡¡ - Optional RC-4A for Secure Remote Relay Control, see DOD 582 - SIP compliant - PoE powered (class 1, <4 Watts)¡¡¡ - Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging - Network downloadable firmware - 54ö armored handset cable - Cycles to up to three rollover phone numbers on busy or no-answer - Remotely programmable - Extended temperature range (-40¦F to 140¦F) - Selectable auto-answer feature for monitoring - Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859 - Flush mount using a standard double-gang box (not included) - Surface mount using an optional VE-5+10 surface mount box (not included, see DOD 424) - Optional VE-LIGHT kit to illuminate the front panel at night, see DOD 428 - Diagnostics (for testing relay) |
-Auto dial 1 (up to 32 digits) programmable speed dial number
Multi-number dialer mode adds 5 (up to 16 digits) speed dial numbers Touch tone or pulse dialing Non-volatile memory (no batteries required) Operates on analog PABX and key system extentions or analog Centrex and C.O. lines Programmable 6 digit security code Touch tone programmable Vandal resistant Weather resistant Designed to meet IP66 Ingress Protection Rating 54" armored handset cord Programmable pre-dial pause Blocks fraudulent calls from hand held pocket dialers Limited toll restriction Hearing aid compatible amplified handset with sealed push button volume control |
- Vandal Resistant Features:
- 12 gauge 316 stainless steel faceplate - Permanent laser etched graphics - Heavy duty metal hook switch - Heavy duty metal keypad - 54? armored handset cable - T-10 Security Torx drive mounting screws - Weather Resistant Features: - Marine grade 316 stainless steel faceplate - Marine grade 316 stainless steel Torx security screws - Internally sealed keypad - Equipped with Enhanced Weather Protection (EWP) - Faceplate gasket (on EWP models) - Ring with adjustable volume and cadence - Hearing aid compatible amplified handset with sealed push button volume control - Two sets of SPDT 2 Amp relay contacts for door/gate or camera control - Optional RC-4A for Secure Remote Relay Control, see DOD 582 - SIP compliant - PoE powered (class 1, <4 Watts) - Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging - Network downloadable firmware - 54ö armored handset cable - Enhanced Weather Protection (EWP), EWP products are designed to meet IP66 Ingress Protection Rating, see DOD 859 - Programmable to speed dial up to 250 numbers - 26 Bit Wiegand input for optional proximity card readers, see DOD 221 and 228 - 26 Bit Wiegand output connect to card reader input of an Access Control System - Cycles to rollover phone number on busy or no-answer - Program up to 1,000 keyless entry codes¡¡¡ and/or proximity card numbers - Keyless entry codes and proximity card numbers can be programmed to only allow access at specific times and day of week - Event logging with time and date stamp - Remotely programmable - Extended temperature range (-40¦F to 140¦F) - Zinc plated steel rough-in box with (2) 0.75? conduit knockouts included - Flush mount using the included rough-in box or surface mount using a Viking VE-5+10 surface mount box (not included, DOD 424) - Optional VE-LIGHT kit to illuminate the front panel at night, see DOD 428 - Diagnostics (for testing relay) |
- Vandal Resistant Features:
- 12 gauge (0.105 |
- Standard 26-bit Wiegand interface
- Designed for outdoor use, the PRX-4 comes standard with Enhanced Weather Protection - Pigtail connection for easy installation - Bi-color LED shows activity - Screw protection caps - Beep tones acknowledge key strokes - Programmable Facility Code stored in non-volatile memory (no batteries required) |
-Required to reposition the camera when mounting the E-50 horizontally
Corrects the video orientation when camera is mounted horizontally Includes a #2 screw and lock washer |
- Ringing Phone or TTY indication for the hearing impaired
- Ringing phone indication in loud warehouses and factories - Emergency illumination for emergency phones in elevators, campuses, hallways, parking ramps, etc. - Alarm indication for security systems or alarm panels with phone dialers - Durable polycarbonate lens - High output long life LED technology - Four programmable flash patterns: - Single Flash - Double Flash - Quad Flash - Flicker Flash - 6 programmable beacon and strobe brightness settings - Immune to shock and vibration - Flush mount or surface mount with weatherproof single gang box (included) - 3/4ö knockouts for connecting conduit, etc. - Strobe and control module may be installed separately - Can be configured to signal: ringing, off-hook, a combination of both ringing and off-hook (line in-use), or triggered from a contact closure - One set of (NO) normally open and (NC) normally closed relay contacts provided - Selectable ring cadence mode (strobe light will remain flashing between rings) - Switched 12V DC output (follows relay activation for powering strobe lights, cameras, etc.) - On/off switches for ring detection and off-hook/loop detection - Disable input, ideal for use with two-button emergency phones like VikingÆs E-1600-20A (DOD# 215), will not activate strobe light on ôInfoö calls - Power: 120V AC to 12V DC adapter provided - Maximum Power Supply Run Length on CAT-5: 1 pair = 125 ft, 2 pair = 225 ft, 3 pair = 325 ft, 4 pair = 475 ft - Maximum SL-2 Wire Run Length on CAT-5: 3 wires = 100 ft, 6 wires = 300 ft - Strobe Dimensions: 111mm diameter x 69mm (4.38 |
- Over 57,000 hours (6.5 years) of continuous use will maintain a minimum of 70% light output
- Four programmable flash patterns: - Single Flash - Double Flash - Quad flash - Flicker Flash - 6 programmable beacon and strobe brightness settings - Immune to shock and vibration - Low current draw - Shatter resistant polycarbonate lens - SL-2-EWP is designed to meet IP66 ingress Protection Rating (see DOD# 859 for more information) |
- Applications: Hearing impaired locations Call centers Telemarketing Product support groups Office cubicles CO based voice messaging Purchasing departments Sales offices
- Displays |
- Loud ringing from an analog line
- Connect via screw terminals or modular RJ-11 jack - 7 ft line cord provided - Adjustable volume control |
- Viking line seizure relay device
- Allows the user to share an existing phone line with an emergency phone or other priority alarm device - Interrupts any call in progress and returns fresh dial tone to the emergency phone - Modular connections for easy installation - Operates on any 12-32V DC power source - 12V DC adapter provided - During power outages the line is connected directly to the emergency device - Off hook detection LED for emergency device port - Handy test button to simulate an emergency device off hook - One year manufacturer's warranty |
- Single Viking 1600A Series elevator emergency phones (DOD# 215)
- Add to the Viking model LC-6 (DOD# 245) for use with banks of two to six 1600A Series elevator emergency phones - Complies with ASME A17.1 Elevator Code - Compatible with Viking 1600A Series phones - Compatible with Viking Model LC-6 Six Port Line Concentrator - Volume adjustable audible signaling - Mounts in standard double gang electrical box - Power: 120V AC/ 12V DC UL Listed adapter provided - Dimensions: 124 mm x 124 mm x 33 mm (4.9ö x 4.9ö x 1.3ö) - Environmental: 0 C to 32 C (32 F to 90 F) with 5% to 95% noncondensing humidity - Maximum Power Supply Wire Length: 244m (500 ft) with #24 gauge wire - Connections: (6) color-coded wires with (6) gel-filled butt connectors |
- On-board 2 pole relay with both NO and NC contacts available
- Phone line connection thru an RJ-11 or terminal block - Power connection thru a 2.1 mm plug or terminal block - Power supply included - DIP switch selectable delay times of 5, 10, 15, and 20 seconds - Wall mount housing with (2) #6+3/4 panhead screws included |
- Read range of up to 400 ft (line of sight)
- Secure, digital, anti-playback wireless communications - 4 channels of 26 Bit Wiegand data output - Optional external antenna connector - LED and transducer transmitter feedback - Adjustable Read Range - Removable terminal block for easy wiring - Cable grommet included for sealing cable exit |
- Read range of up to 400 ft (line of sight)
-Convenient Key Fob design -4 buttons to activate up to 4 different Wiegand devices -Secure, Rolling Code + Encryption, digital, anti-playback wireless transmission -Integrated 125KHz proximity module for close range access credential (can be used with Viking Proximity card readers and certain 125KHz HID**readers) -Replaceable CR2032 battery lasts up to 500,000 button presses -Robust buttons rated for up to 1 million activations -LED to indicate button press and battery strength -Internal silicone diaphram/gasket seals circuit board from moisture and debris -CE mark |
- Detects ring voltage and loop connect
- Screw terminal connections - Wall mountable with foam tape (included) or screws (not included) - Auxiliary 12V DC output - Adjustable time-out for relay closure - Two sets of relay contacts provided - Selectable NO (normally open) or NC (normally closed) relay contacts |
- Viking Advanced Loop Detector loop detect board for ring and line
|
- Powered by ring signal û no external power supply required
- Provides tone over existing paging amplifiers - Terminals for automatic switching between paging audio and warble tone - Auxiliary relay contacts provided - Connects directly to ringing analog PABX/KSU stations with RJ11 or terminals - Floating 600 ohm audio output - LED indication of unit activation |
- High performance medium range 125 KHz proximity reader
-Compact size and long read range of up to 16 inches -Ideal for parking control, gate access, turnstiles, etc -Reader transmits data in 26-Bit Wiegand format, making it compatible with any of the Wiegand equipped Viking entry controllers -Designed to be mounted directly to a wall, post, single gang electrical box or use an optional mounting kit for attaching it to a Viking gooseneck pedestal -Mounting is simplified with horizontal and vertical mounting slots, which allow the reader to be conveniently adjusted and leveled -To increase vandal resistance the chassis is a single piece design with the mounting screws concealed behind a UV stable label -Equipped with Enhanced Weather Protection (EWP) for outdoor installations where the unit is exposed to precipitation or condensation -With its sealed connections and fully potted electronics the PRX-3 is designed to meet an IP66 Ingress Protection Rating -For more information on Enhanced Weather Protection, see DOD 859 |
- Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics, speaker/mic screen, heavy duty metal ôCallö button and T-10 Torx security mounting screws
- Weather Resistant Features: Marine grade 316 stainless steel faceplate, screws and push button switch. Switch internally sealed per IP67. Mylar speaker. Self-draining mic mount.Faceplate, mic and speaker gaskets. Weather resistant powder paint on optional VE-5x5 (DOD# 424) - Volume adjustments for microphone and speaker - Two watt amplifier to drive speaker - Power supply included - Blue LED indicator - Extended temperature range (-15¦F to 130¦F) - Optional VE-5x5 surface mount back box (DOD# 424) - Optional MSB-30-EWP is designed to meet IP66 Ingress Protection Rating (see DOD# 859 for more information) |
- Vandal Resistant Features: 14 gauge louvered 316 stainless steel faceplate with permanent laser etched graphics, speaker/mic screen, heavy duty metal ôCallö button and T-10 Torx security mounting screws.
- Weather Resistant Features: Marine grade 316 stainless steel faceplate, screws and push button switch. Switch internally sealed per IP67. Mylar speaker. Self-draining mic mount. Faceplate, mic and speaker gaskets. Weather resistant powder paint on optional VE-5+5 (DOD# 424). - Volume adjustments for microphone and speaker - Two Watt amplifier to drive speaker - Power supply included - Blue LED indicator - Extended temperature range of -15¦F to 130¦F - Optional VE-5+5 surface mount back box (DOD 424) - Optional MSB-30-EWP is designed to meet IP66 Ingress Protection Rating (see DOD 859 for more information) |
- Modular Jack for the FAXJ-1000
|
- Heavy gauge steel brackets
- All required mounting hardware included - Durable outdoor rated label - Telephone jack for Auto-Programming |
- Non-volatile memory (no batteries required)
- Stores up to seven 16-digit numbers and one 32-digit phone number per input (64 total) - 60 total seconds of record time - Programmable message repeat counter - Programmable lap counter for dialing groups of phone numbers - Eight programmable normally open/closed inputs - Programmable ring delay for remote programming and alarm polling - Pager compatible - Remote security and access codes - Programmable store caster mode - CPC break detection - Local or remote programming and recording - RS-232 port for programming via a P.C. - Compatible with the RC-2A and RC-3 remote DTMF controllers |
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |