10" DuraBlack Double-Skirted Stovepipe Adaptor is used to adapt DuraBlack stovepipe to appliance flue outlets. Outer wall covers appliance flue outlet.
|
10" Duravent DuraChimney II Double-Wall Chimney Pipe Roof Radiation Shield is required at the top of chase enclosure or where the chimney passes through the roof. A Roof Radiation Shield is not required if the chimney is unenclosed in the attic. Four plates (included)make up one shield. Three of the four plates shown.
|
10" - 12" Duravent DuraChimney II Double-Wall Chimney Pipe Spark Arrestor is used on inside of cap. Optional Spark Arrestor may be required.
|
The Diameter Increaser is used to increase the diameter of a vent.special order.
|
12" Duravent DuraChimney II Anchor with Damper Plate is used as a starter section for DuraChimney II products. Bolts directly to the fireplace outlet. Damper section allows the chimney to be closed when the fireplace is not in use. Includes chain and lintel hook.
|
DirectVent Pro Features fully unitized, twist-lock construction in 3” diameters. It can be used in both vertical and horizontal installations. Stainless steel welded seam inner wall, combined with a galvalume welded seam outer wall. Inner and outer are sealed with O-Ring gaskets. Galvalume outer finish. To calculate installed length, subtract 1 1/2” from each length of pipe. CVS is listed to 0” clearance as a double wall vent system for Category II, III, and IV appliances, for flue temperature of up to 400°F for horizontal enclosures, and up to 480°F for vertical enclosures.
|
3" - 4" Type B Gas Vent Attic Insulation Shield is required for installations that pass through an attic to prevent insulation and debris from accumulating near the vent.
|
3" Duravent PelletVent Galvalume 12" Adjustable Length Pipe is used to add length to PelletVent pipe. 12” pipe adds 3”-10” of length when used with rigid sections of pipe.
|
3" Duravent PelletVent Galvalume 45-Degree Elbow offsets obstructions as needed. Elbows swivel 360° at base. Angle not adjustable.
|
3" to 4" Duravent PelletVent Increaser is used to transition from 3” pipe to a 4” pipe. Not a reducer or stove adaptor.
|
3" Duravent PelletVent Pro Wall Strap is used to support vent pipe or tee sections. Provides 1” clearance.
|
The DuraTech Base Tee is used to connect gas or oil-burning appliances to DuraTech Chimney. No adaptor is needed to connect this to the support box. Tee cap is included. Important: You must maintain an 18" clearance (air space) to combustible materials. DuraTech is a double-wall, all-fuel chimney system for use with wood stoves, fireplaces, furnaces, boilers, ranges, water heaters, or other appliances fueled by wood, oil, coal, or gas, and zero-clearance fireplaces that are factory-built.
|
4" FasNSeal Double-To-Single Wall Adaptor is used to transition from double-wall pipe to single-wall pipe.
|
5" FasNSeal Double-To-Single Wall Adaptor is used to transition from double-wall pipe to single-wall pipe.
|
3" FasNSeal Universal Appliance Adaptor features a built-in mechanical locking band, which allows for quick and simple installations. Meant to be used on appliances and 3" FasNSeal Vent Pipes.
|
4" FasNSeal Universal Appliance Adaptor features a built-in mechanical locking band, which allows for quick and simple installations. Meant to be used on appliances and 4" FasNSeal Vent Pipes.
|
5" FasNSeal Universal Appliance Adaptor features a built-in mechanical locking band, which allows for quick and simple installations. Meant to be used on appliances and 5" FasNSeal Vent Pipes.
|
6" FasNSeal Universal Appliance Adaptor features a built-in mechanical locking band, which allows for quick and simple installations. Meant to be used on appliances and 6" FasNSeal Vent Pipes.
|
Storm collar not included.
|
Storm collar not included.
|
10" DuraVent DuraBlack 45 Degree Sectioned Elbow, Adjustable
|
DuraChimney II is an exceptional factory-built alternative to pre-fabricated masonry chimneys. DuraChimney II is a unitized, lightweight design which eliminates the need for field assembly of pipe sections, allowing for faster installation. DuraChimney II is designed to stay cool on the outside, to provide a hot draft on the inside and to provide a fire-safe design that protects both the chimney and the building. The double-wall, air-cooled design allows the chimney to expand both radially and lengthwise under high temperatures.
|
This chimney cap is used to terminate the chimney system and to keep rain and debris out of your flue. Required on all installations. Slides over the previous section of DuraChimney II pipe to allow for chimney height adjustment. Includes a spark arrestor to prevent sparks from jumping out of flue.
|
DuraChimney II is an exceptional factory-built alternative to pre-fabricated masonry chimneys. DuraChimney II is a unitized, lightweight design which eliminates the need for field assembly of pipe sections, allowing for faster installation. DuraChimney II is designed to stay cool on the outside, to provide a hot draft on the inside and to provide a fire-safe design that protects both the chimney and the building. The double-wall, air-cooled design allows the chimney to expand both radially and lengthwise under high temperatures.
|
DuraTech sets the standard in performance. The ThermalTech blanket insulation in the lengths, elbows, and tees eliminates hot spots + no shifting, settling, or voids. In the event of a creosote fire, this insulation lets the chimney liner expand outward a
|
This elbow strap is used to prevent excessive weight on the elbows by supporting the weight of the chimney. Required to be installed between two elbows in offset installations. Multiple elbow straps may be required for offset installations.
|
DuraTech sets the standard in performance. The ThermalTech blanket insulation in the lengths, elbows, and tees eliminates hot spots + no shifting, settling, or voids. In the event of a creosote fire, this insulation lets the chimney liner expand outward a
|
DuraTech sets the standard in performance. The ThermalTech blanket insulation in the lengths, elbows, and tees eliminates hot spots + no shifting, settling, or voids. In the event of a creosote fire, this insulation lets the chimney liner expand outward a
|
Storm collar not included.
|
DuraTech sets the standard in performance. The ThermalTech blanket insulation in the lengths, elbows, and tees eliminates hot spots + no shifting, settling, or voids. In the event of a creosote fire, this insulation lets the chimney liner expand outward a
|
DuraTech sets the standard in performance. The ThermalTech blanket insulation in the lengths, elbows, and tees eliminates hot spots + no shifting, settling, or voids. In the event of a creosote fire, this insulation lets the chimney liner expand outward a
|
DuraTech sets the standard in performance. The ThermalTech blanket insulation in the lengths, elbows, and tees eliminates hot spots + no shifting, settling, or voids. In the event of a creosote fire, this insulation lets the chimney liner expand outward a
|
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |