Allows outside fresh air for combustion to come through the wall thimble without having to cut a second hole into the wall
Kit includes an insulation ring to cut drafts. Already extended 10' long by 2" diameter hose; and clamp. |
PelletVent Pro Appliance Adaptor/Increaser, Connects 4" Pipe To 3" Appliance Take-Off, Black
|
PelletVent Pro Appliance Adaptor/Increaser, Connects 4" Pipe To 3" Appliance Take-Off, Galvalume
|
3" PelletVent Pro Increaser, 3" To 4"
|
3" Type B Gas Vent Firestop Spacer, Square
|
3" Type B Gas Vent 45 Degree Adjustable Elbow
|
3" Type B Gas Vent Draft Hood Connector
|
This cap is required where pipe terminates above the roof line. Use for vertical installations only.
|
3" Type B Gas Vent Flashing, Adjustable 0/12 - 6/12 Pitch
|
3" Type B Gas Vent Firestop Support, Square
|
3" Type B Gas Vent Storm Collar
|
3" Type B Gas Vent Tee
|
3" Type B Gas Vent Tee Cover
|
3" Type B Gas Vent Wall Strap
|
3" Type B Gas Vent Wall Thimble
|
PelletVent Pro is a revolutionary patent pending concept for venting pellet stoves and inserts. It requires no additional gaskets or sealants to achieve leak-resistant connections.
PelletVent Pro+s perfect fit and finish is made possible with laser-wel |
PelletVent Pro is a revolutionary patent pending concept for venting pellet stoves and inserts. It requires no additional gaskets or sealants to achieve leak-resistant connections.
PelletVent Pro+s perfect fit and finish is made possible with laser-wel |
PelletVent Pro is a revolutionary patent pending concept for venting pellet stoves and inserts. It requires no additional gaskets or sealants to achieve leak-resistant connections.
PelletVent Pro+s perfect fit and finish is made possible with laser-wel |
PelletVent Pro is a revolutionary patent pending concept for venting pellet stoves and inserts. It requires no additional gaskets or sealants to achieve leak-resistant connections.
PelletVent Pro+s perfect fit and finish is made possible with laser-wel |
3" x 12" Type B Gas Vent Pipe
|
3" X 15' DuraFlex 304-Alloy Stainless Steel Liner is used with wood-pellet, non-condensing gas, wood-burning, and oil appliances.
|
DuraFlex 304 and 316 are lighter, more economical liners. Excellent when there are minimal offsets in the chimney. DuraFlex 304 is intended for wood burning. DuraFlex 316 is intended for wood, non-condensing gas and oil-fired appliances. DuraFlex 304 and
|
PelletVent Pro is a revolutionary patent pending concept for venting pellet stoves and inserts. It requires no additional gaskets or sealants to achieve leak-resistant connections.
PelletVent Pro¬s perfect fit and finish is made possible with laser-wel |
Shown in photo as black.
|
Use for venting listed natural gas or liquid propane Category I, draft hood appliances, or appliances that have been specifically tested and listed to use Type B Gas Vent. The appliances listed typically use Type B Gas Vent systems, but not always: Furnaces, Water Heaters, Boilers, Room Heaters, Decorative Gas Appliances, and Unit Heaters. To calculate installed length, subtract 1 1?2” from each connection of vent. A 1” clearance (air space) to combustible materials must be maintained. To calculate OD add 5?8”.
|
For ordering ease, use DuraFlex kits.
|
PelletVent Pro is a revolutionary patent pending concept for venting pellet stoves and inserts. It requires no additional gaskets or sealants to achieve leak-resistant connections.
PelletVent Pro+s perfect fit and finish is made possible with laser-wel |
3" x 24" Type B Gas Vent Pipe
|
DuraFlex 304 and 316 are lighter, more economical liners. Excellent when there are minimal offsets in the chimney. DuraFlex 304 is intended for wood burning. DuraFlex 316 is intended for wood, non-condensing gas and oil-fired appliances. DuraFlex 304 and
|
Here+s the liner to use when converting existing chimneys to the DuraVent DirectVent Pro System. The 3" diameter is used with the DirectVent Pro Co-Linear Chimney Liner System. The 4" diameter is used with the DirectVent Pro Factory-Built and Masonry Chim
|
3" x 35' DuraFlex Aluminum Liner Kit includes: DuraFlex AL Length, DuraFlex AL Cap, DuraFlex Top Plate, and DuraFlex Mortar Sleeve.
|
Here+s the liner to use when converting existing chimneys to the DuraVent DirectVent Pro System. The 3" diameter is used with the DirectVent Pro Co-Linear Chimney Liner System. The 4" diameter is used with the DirectVent Pro Factory-Built and Masonry Chim
|
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |