Finishing collar needed.
|
6" Type B Gas Vent Wye, Double Wall With 45 Degree 3" Branch
|
6" DuraVent DuraPlus 30 Degree Elbow Kit, Galvalume
|
6" DuraVent DuraPlus Elbow Strap
|
DURAPLUS ROOF FLASHING 7/12-12/12 pitch DuraPlus roof flashing Use to weather proof the penetration of - chimney pipe through the roof Storm collar required Made of galvalume steel 6DP-F12 6 IN. ADJ ROOF FLASHING SIZE:For 6" Vent
|
Supports 40' of DuraPlus. Framing requirements are 14-1/2" x 14-1/2".
|
Supports up to 35' of chimney.
|
6" DuraVent DuraPlus Tee With Cover, Galvalume
|
For interior or exterior installation. Stabilizes the chimney providing the required 2" clearance.
|
Thimble requires 14-1/2" x 14-1/2" framed opening and fits wall 4-3/4" to 7-3/4" thick.
|
DuraTech sets the standard in performance. The ThermalTech blanket insulation in the lengths, elbows, and tees eliminates hot spots + no shifting, settling, or voids. In the event of a creosote fire, this insulation lets the chimney liner expand outward a
|
DuraTech sets the standard in performance. The ThermalTech blanket insulation in the lengths, elbows, and tees eliminates hot spots + no shifting, settling, or voids. In the event of a creosote fire, this insulation lets the chimney liner expand outward a
|
DuraTech sets the standard in performance. The ThermalTech blanket insulation in the lengths, elbows, and tees eliminates hot spots + no shifting, settling, or voids. In the event of a creosote fire, this insulation lets the chimney liner expand outward a
|
DuraTech sets the standard in performance. The ThermalTech blanket insulation in the lengths, elbows, and tees eliminates hot spots + no shifting, settling, or voids. In the event of a creosote fire, this insulation lets the chimney liner expand outward a
|
6" DuraBlack Oval-to-Round Adaptor connects to the oval flue outlet of the appliance. Must be field-ovalized.
|
14" Slip Connector allows 3" to 13" of adjustment for an easy, dripfree
installation without cutting the pipe. |
For an economical, drip-free, single-wall stovepipe, DuraBlack SS is an
excellent choice. Built to high standards, DuraBlack SS is constructed with die-formed end fittings. Adjustable lengths eliminate the need for cutting and crimping. |
14" Slip Connector with trim, allows 3" to 13" of adjustment for an
easy, drip-free installation without cutting the pipe. |
For an economical, drip-free, single-wall stovepipe, DuraBlack SS is an
excellent choice. Built to high standards, DuraBlack SS is constructed with die-formed end fittings. Adjustable lengths eliminate the need for cutting and crimping. |
Includes Cap, Top Plate, Tee, and Tee Cover
|
Use these end cones to ease the installation of liners into a tight flue. Attach a rope to the end cone and snake the liner easily down the flue.
Fits UltraPro, Pro, and RoundFlex. |
6" Dura-Vent DuraFlex Gas Component Kit
This item cannot ship to APO/FPO addresses. Please accept our apologies. M&G DuraVent provides no warranty for the following professional products if such products are not installed by a trained professional installer: DuraTech®, DuraPlus HTC®, DuraChimney® II, PelletVent Pro®, DirectVent Pro®, FasNSeal®, FasNSeal® W2, FasNSeal® Flex, and PolyPro®, and M&G DuraVent's relining products including DuraLiner®, DuraFlex® (SW, Pro, 316, 304), and Ventinox®. • Any M&G DuraVent product sold by a non-approved website will not be warranted. • Any customer that has bought product from a non-approved website will not be given technical assistance or support from M&G DuraVent. • Any website not compliant with this Internet Sales Policy shall not use M&G DuraVent's trademarked and registered properties, and will be notified to remove them immediately. DuraVent reserves the right to enforce its intellectual property rights against entities not in compliance with this Internet Sales Policy. |
Attaches with a band clamp.
|
6" Duraliner 30-Degree Oval-to-Oval Stove Connector is used to connect an insert to oval DuraLiner pipe at a 30° angle.
|
Use to connect stove to DuraLiner pipe at a 30 degree angle.
|
Connections are made using the rivets provided with each piece. Just pop the rivets into the holes in the factory fittings and your done.
Rigid inner liner is .016" 304-alloy stainless. Outer liner is .018" aluminized steel. Flex lengths are .016" 3 |
Use for rear stove exits. Sleeve adjusts from 8-1/2" to 12".
|
Use to connect stove to oval DuraLiner pipe. Sized to convert round stove outlets to oval DuraLiner pipe.
|
6" DuraLiner Masonry Thimble with Slip Connector is used to penetrate masonry chimney to allow connection of DuraBlack or DVL to DuraLiner. Adaptor must be used to attach the connector pipe to the masonry thimble.
|
6" Duraliner Oval Spacer is used to maintain a 1” clearance with flex sections of DuraLiner.
|
Provides connection between Masonry Wall Thimble, Wall Pass-Through, or stove connector pipe to oval DuraLiner. Single-wall.
|
Use with Transition Anchor Plate.
|
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |