You must use a DuraTech chimney adaptor with trim between this adaptor and a DuraTech or DuraPlus ceiling support.
|
3" PelletVent Pro Flashing, Adjustable
|
3" PelletVent Pro Wall Strap/Tee Support, Adjustable
|
3" PelletVent Pro Attic Insulation Shield
|
This adaptor tee with clean-out cap is used for a 90° offset. Attaches directly to appliance as an adaptor. One piece unit incorporates removable twist-lock clean-out tee Ccap.
|
Can be used for horizontal or vertical installations. Makes a connection to the flue collar on the pellet appliance. Provides a male-end-down connection.
|
This clean-out tee cap is used as a replacement for your existing clean-out tee cap. The new PelletVent Pro tee Cap is a tight fit by design. We recommend using rubber gloves or a strap wrench to easily remove.
|
This double tee clean out tee cap allows clean-out access for horizontal and vertical installations. Use for a 90° offset. Branch swivels for alignment. One piece unit incorporates removable twist-lock Clean-Out Tee Cap.
|
This increaser adaptor tee with clean-out cap is used for a 90° offset. Attaches directly to appliance as an adaptor. Converts a 3” appliance to a 4” PelletVent Pro system. One piece unit incorporates removable twist-lock clean-out tee cap.
|
This single tee with clean-out cap is used for a 90° offset. Branch swivels for alignment. One piece unit incorporates removable twist-lock clean-out tee cap.
|
Use for through-the-wall installations.
|
Vertical installation only. Required where pipe terminates above roof.
|
3" PelletVent Pro Flashing DSA Aluminum, 0/12 - 6/12
|
3" PelletVent Pro Flashing DSA Aluminum, 7/12 - 12/12
|
Join UltraPro and Pro to PelletVent Pro using pop rivets.
|
Use to connect PelletVent Pro to a masonry chimney with stainless steel flexible liner. Female end swivels for easy alignment.
|
This adaptor tee with clean-out cap is used for a 90° offset. Attaches directly to appliance as an adaptor. One piece unit incorporates removable twist-lock clean-out tee Cap.
|
Can be used for horizontal or vertical installations. Makes a connection to the flue collar on the pellet appliance. Provides a male-end-down connection.
|
This clean-out tee cap is used as a replacement for your existing clean-out tee cap. The new PelletVent Pro tee Cap is a tight fit by design. We recommend using rubber gloves or a strap wrench to easily remove.
|
This double tee clean out tee cap allows clean-out access for horizontal and vertical installations. Use for a 90° offset. Branch swivels for alignment. One piece unit incorporates removable twist-lock Clean-Out Tee Cap.
|
This increaser adaptor tee with clean-out cap is used for a 90° offset. Attaches directly to appliance as an adaptor. Converts a 3” appliance to a 4” PelletVent Pro system. One piece unit incorporates removable twist-lock clean-out tee cap.
|
This single tee with clean-out cap is used for a 90° offset. Branch swivels for alignment. One piece unit incorporates removable twist-lock clean-out tee cap.
|
3" PelletVent Pro Flashing, Tall Cone
|
3" PelletVent Pro Harman Adaptor
|
Includes a round horizontal cap, a wall thimble for 1" clearance, and a black appliance adaptor.
|
Use to provide protection from blower discharge in horizontal venting situations.
|
3" Pellet Vent Pro Quick Release Appliance Adaptor
|
Use for horizontal terminations only. Cap features a swivel collar to adjust exhaust direction.
|
Swivel collar to adjust exhaust direction. Horizontal termination only.
|
3" PelletVent Pro Storm Collar
|
Includes a vertical cap, an adjustable flashing, a storm collar, a cathedral ceiling support box with trim and clamp, and a black appliance adaptor.
|
Includes a vertical cap, an adjustable flashing, a storm collar, a ceiling support firestop spacer for 1" clearance, and a black appliance adaptor.
|
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |