Adapter Plate for GPSMAP® 9x2 to 9x3 Series This adapter bezel kit allows you to install a new GPSMAP 9x3 into the existing cutout of a GPSMAP 9x2 or 9x2 Plus chartplotter in your dash. |
Airmar 509LHW 3kW 28 to 60kHz & 150 to 250kHz Thru-Hull Transducer
This all-in-one transducer for popular fishing frequencies (28, 38, 50 and 200) is our best performing, highest power, 2 to 3 kW transducer. It has a depth of 10,000 feet; an operating frequency of 28 to 60 kHz and 150 to 250 kHz; a beamwidth of 5x9 to 11x23 degrees or a constant 25 degrees; and a 0 to 25 degree deadrise. This transducer has a narrow beam low frequencies for deep water performance and high wide frequencies for shallow water performance. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Airmar B117 200/50kHz Bronze Thru-Hull Transducer - 6 Pin
010-10182-01 Connect our bronze, thru-hull mount transducer to your compatible device to receive depth and temperature data. This transducer has an operating frequency of 200 and 50 kHz; a beamwidth of 12 degrees at 200 kHz, 45 degrees at 50 kHz; and a 0 to 8 degree deadrise. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Airmar B175H 12° Tilt, 1kW CHIRP High, 130-210kHz Thru-Hull Transducer with Temp WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Airmar CM599LHW 1-3kW Pocket Mounted Transducer, 28-60 & 150-250kHz WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Airmar DST 810 Smart Transducer - 0° Degree This plastic thru-hull NMEA 2000® smart transducer combines precise depth, speed and temperature signals with attitude sensing for heel/trim and pitch/roll data. It can read depths to 330’ and offers fast 5 Hz water speed signal output for smoother visualization on compatible chartplotters or other displays. Wireless BLUETOOTH® connectivity makes it easy to manage calibration of sensor data through the Airmar Cast app interface. And the 235 kHz sensor operating frequency helps prevent mutual interference with other echosounder devices on the vessel. The transducer’s wide, fan-shaped beamwidth of 10x44 degrees enables it to find bottom even when installed on steep deadrise hulls or heeling sailboats. Specifications:
|
Smart Thru-Hull Mount Transducer with Depth & Temperature (20°, NMEA 2000®) - Airmar DT800
Our plastic smart thru-hull mount transducer provides depth and temperature data to your NMEA 2000 network. This 100 W transducer has a depth of 600 ft; an operating frequency of 235 kHz; a beamwidth of 12 degrees; and a 16 to 24 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. |
AIS™ 800 Blackbox Transceiver **As the FCC requires all units sold in the US to be programmed by a qualified technician. Please submit the form below for programming at time of purchase. A copy of the MMSI Registration or FCC Ship Station License is required along with the vessel master or owner's signature on the completed programming form. ** Help Avoid Running into Trouble on the Water
Increase your situational awareness and confidence on the water with the Garmin AIS 800 transceiver. It has 5 watts of transmit power and provides faster position reporting than ever before¹. It transmits your vessel information to other AIS receivers in your area while it receives their AIS target data. Garmin AIS 800 has an internal VHF antenna splitter, which allows the VHF and AIS to share a single antenna. It includes a built-in GPS (with connector for optional external antenna) and integrates seamlessly into the Garmin onboard system. The transceiver features NMEA 2000 connectivity for easy integration with compatible chartplotters and multifunction displays. And it’s all packed into an easy-to-install black box unit with a small footprint. In The Box
¹When cruising above 14 knots WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Bring a spare pack along with you and make sure you've got back-up power when and where you need it most!
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Alkaline Battery Pack for Rino® 610, 650 & 655t
Part #: 010-11600-00 Bring a spare pack along with you and make sure you've got back-up power when and where you need it! Uses 4AA batteries (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
AMPS Rugged Mount with Audio/Power Cable for Montana® Series
Take advantage of Montana's versatility. Mount your Montana on your motorcycle or ATV and take it on the road. This kit includes the mount, hardware (AMPS arm/ball socket sold separately) and a cable with bare power/audio/data wires. It also includes anti-glare screen protectors. Compatible Devices:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Anti-Glare Screen Protectors for Montana® Series
These screen protectors reduce sunlight glare on the Montana's display, minimize fingerprint smudges and protect against scratches. Compatible Devices:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Auto Friction Mount Kit with Speaker for Montana® Series
Your ultimate travel companion, this portable dashboard mount keeps MontanaT in view as you drive and is a great alternative when windshield mounts are prohibited. The kit includes a mount with an integrated speaker and a portable friction mount for simple installation. It also includes a vehicle power cable. Compatible Devices:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Class B Compact Drive Unit
The Class B Compact Drive Unit works with the GHP™ 12 marine autopilot system to control your sailboat's steering system. This device is designed for use with sailboats with up to 48,400 lbs of displacement. Compatible Devices:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
B117 Bronze Thru-Hull Depth/Temp - 8-Pin This bronze thru-hull mount transducer performs well at high speeds. An excellent choice for fiberglass and wood hulls, this 8-pin 600 W narrow stem transducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45 to 12 degrees; and a 0 to 7 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat. Do not use on metal hulls. When using with a 6-pin Garmin sounder, a transducer adapter cable is required WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Airmar B150M
w/0° Tilt 300W Flush-mounted bronze housing,tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. Low, medium, and high frequency versions provide maximum flexibility for the choice of frequencies. Excellent for fiberglass and wood hulls. Entry Level Chirp Solution. Provides good depth capability and good target separation. Max Depth - 1,500' Suppoarted Deadrise/Transom Angles - 0-7° Deadrise WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Airmar B150M
w/12° Tilt 300W Flush-mounted bronze housing,tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. Low, medium, and high frequency versions provide maximum flexibility for the choice of frequencies. Excellent for fiberglass and wood hulls. Entry Level Chirp Solution. Provides good depth capability and good target separation. Max Depth - 1,500' Suppoarted Deadrise/Transom Angles - 8-15° Deadrise WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Airmar B150M
w/20° Tilt 300W Flush-mounted bronze housing,tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. Low, medium, and high frequency versions provide maximum flexibility for the choice of frequencies. Excellent for fiberglass and wood hulls. Entry Level Chirp Solution. Provides good depth capability and good target separation. Max Depth - 1,500' Suppoarted Deadrise/Transom Angles - 16-24° Deadrise WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
B164 1kW Tilted Element 20° - 8-Pin
Garmin's bronze, thru-hull mount transducer with 20° tilt provides depth and temperature data. Garmin's transducer has an operating frequency of 50 or 200 kHz and mounts on a 16-24° deadrise angle. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Airmar B175L
w/0° Tilt 1kW Flush-mounted bronze housing protrudes less than 1/4" outside hull and can sit on trailer rollers/bunks without damage. Tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. Low, medium, and high frequency versions provide maximum flexibility for the choice of frequencies. Excellent for fiberglass and wood hulls. Max Depth - 3,000' Suppoarted Deadrise/Transom Angles - 0-7° Deadrise WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Airmar B175L
w/12° Tilt 1kW Flush-mounted bronze housing protrudes less than 1/4" outside hull and can sit on trailer rollers/bunks without damage. Tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. Low, medium, and high frequency versions provide maximum flexibility for the choice of frequencies. Excellent for fiberglass and wood hulls. Max Depth - 3,000' Suppoarted Deadrise/Transom Angles - 8-15° Deadrise WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Airmar B175L
w/20° Tilt 1kW Flush-mounted bronze housing protrudes less than 1/4" outside hull and can sit on trailer rollers/bunks without damage. Tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. Low, medium, and high frequency versions provide maximum flexibility for the choice of frequencies. Excellent for fiberglass and wood hulls. Max Depth - 3,000' Suppoarted Deadrise/Transom Angles - 16-24° Deadrise WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Airmar B175M
w/0° Tilt 1kW Flush-mounted bronze housing protrudes less than 1/4" outside hull and can sit on trailer rollers/bunks without damage. Tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. Low, medium, and high frequency versions provide maximum flexibility for the choice of frequencies. Excellent for fiberglass and wood hulls. Max Depth - 3,000' Suppoarted Deadrise/Transom Angles - 0-7° Deadrise WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Airmar B175M
w/12° Tilt 1kW Flush-mounted bronze housing protrudes less than 1/4" outside hull and can sit on trailer rollers/bunks without damage. Tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. Low, medium, and high frequency versions provide maximum flexibility for the choice of frequencies. Excellent for fiberglass and wood hulls. Max Depth - 3,000' Suppoarted Deadrise/Transom Angles - 8-15° Deadrise WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Airmar B175M
w/20° Tilt 1kW Flush-mounted bronze housing protrudes less than 1/4" outside hull and can sit on trailer rollers/bunks without damage. Tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. Low, medium, and high frequency versions provide maximum flexibility for the choice of frequencies. Excellent for fiberglass and wood hulls. Max Depth - 3,000' Suppoarted Deadrise/Transom Angles - 16-24° Deadrise WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
B258 1kW Bronze Thru-Hull Depth/Temp with FB - 8-Pin
Garmin's bronze, thru-hull mount transducer with fairing provides depth and temperature data. Garmin's transducer has an operating frequency of 50 or 200 kHz and mounts on a 0-22° deadrise angle. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
B265LH Bronze Thru-Hull Mount Transducer w/Depth & Temp - 12-Pin
Garmin's best performing 1 kW thru-hull transducer, this mount performs well in deep water and has exceptional bottom and water column detail. This transducer has a depth of 3,000 feet; an operating frequency of 42 to 65 kHz and 130 to 210 kHz; a beamwidth of 16 to 25 degrees and 6 to 10 degrees; and a 0 to 20 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat. Compatible Devices:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
B275LH-W Bronze Thru-Hull Transducer - 12-Pin Get more coverage under your boat with Airmar’s unique wide beam, high frequency Chirp-ready transducers. The high band operates across a frequency range of 150 to 250 kHz and has a fixed 25° beam for all frequencies. The high frequency band results in superior resolution. The constant wide beamwidth provides twice the coverage under the boat and excellent fish arches on the display compared to most high frequency narrow beam transducer options. The included high-performance fairing improves broadband performance at speeds over 30 knots (34 MPH). The high wide is the ideal choice for both inshore and pelagic fishing, where resolution and maximum coverage under the boat are essential down to 500'. The low frequency band and 1 kW of power also provides great deeper water performance. Get the best of both worlds with Airmar’s dual frequency Chirp-ready transducers with wide beam coverage. Features:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
B60 600W Tilted Element 12° - 8-Pin
This entry-level tilted bronze transducer accommodates deadrise angles of 8 to 15 degrees without a fairing. An excellent choice for fiberglass and wood hulls, this 600W 8-pin transducer has a depth of 800' to 1,200'; an operating frequency of 50 to 200 kHz; and a beamwidth of 45 to 12 degrees. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat. *Do not use on metal hulls. When using with a 6-pin Garmin sounder, a transducer adapter cable is required. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
B60 600W Tilted Element - 8-Pin
Garmin's bronze, thru-hull mount transducer with 20° tilt provides depth and temperature data. Garmin's transducer has an operating frequency of 50 or 200 kHz and mounts on a 16-24° deadrise angle. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
B60-12 12° Tilted Element Transducer with 6-Pin
The bronze B60-12° provide a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for more accurate depth readings. The nearly flush housing minimizes drag with only 5 mm (3/16") extending outside of the hull. Features:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Tilted Element Thru-Hull
Minimize Your Drag The B619 model have been the standard in low-profile models for many years. Their large sensitive ceramics allow deep echosounding up to 206M (700'). These nearly flush units minimize drag as only 5mm (2/10") of the housing extends outside of the hull. The bronze B619 provides a vertical beam without a fairing. Inside the housing, the ceramic element is tilted to provide built-in deadrise compensation. The resulting vertical beam provides excellent echo returns for moreaccurate depth readings. Applications
Features
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |