10ft long cable kit used as either a main suspension drop cable or as a safety cable
|
- Bogen 100 watt public address mixer amplifier
- Provides mixing of microphones, telephone and auxiliary sources - 4 inputs: 1 MIC (Lo-Z), 1 AUX (Hi-Z), 1 TEL, plus 1 selectable MIC or AUX - Each input controlled by an independent volume control - Treble and bass control - AUX muting by external contact closure for push-to-talk microphones - TEL input for telephone paging applications - TEL input voice-activated (VOX) mute over AUX input - Variable threshold for TEL input voice-activated AUX mute - Audio output for tape recorder or booster amplifier - Outputs for 4-ohm (direct), and 16-ohm, 25V and 70V speaker systems (transformer coupled) - Output jack to connect a tape recorder or booster amplifier - Output jack to connect a general purpose 600-ohm matching transformer (model WMT1A) - Thermal protection and electronic shutdown - Rack mountable with accessory mounting kit (RPK50) - UL and CSA listed BGC100 |
- Bogen classic amplifier
- 10 Watts - Offers dependable performance and flexibility - UL and CSA listed - Designed with discreet complementary transistor circuitry to assure maximum reliability of power output stages - Transformer isolated 4., 8., 16., 25V and 70V output taps - Rear panel auxiliary receptacle - One dedicated MIC 1 input Lo-Z balanced - One switchable MIC 2/AUX 1 input - Contact muting of AUX input - Separate rear panel-mounted TEL volume control - Voice activated muting of AUX input by Tel input - Variable trigger threshold for voice activation - Optional wall mount kit BGC10 |
The AMT-12 Loudspeaker is designed to provide high-output music and sound reinforcement in a lightweight, cost efficient package. Robust, high-sensitivity woofer and a Ferro fluid-treated 1.77-inch compression driver is combined with highly evolved crossover network technology.
The AMT-12 will fill even large rooms with plenty of power, and a smooth transition makes for highly accurate and realistic sound. Max power handling capacity of 200W at 8-ohms Heavy gauge steel grilles Carrying handle and pole mount built into speaker housing |
- Bogen 12V DC power supply
- 12V DC @ 1.5A - Plug-in BGPCMPS2 |
- High intelligibility and efficiency; ideal for both one-way and talk back applications
- Weatherproof, all-metal construction - 15 watts; 25/70 volt (SPT15A) - Tap settings for 70V: 15, 7.5, 3.8, 1.8, 0.9 watts; for 25V: 15, 7.5, 1.8, 0.94, 0.46 watts - Rotary tap impedance selector on SPT15A - Tilt and swivel base for easy positioning - Screw terminals make installation fast and easy - All-purpose mounting bracket - Self-aligning, field replaceable diaphragm - Mocha enamel finish - Limited lifetime warranty - Mountable to I-beam flange using BogenÆs BC1 Beam Clamp (sold separately) - Mountable to electrical box using BogenÆs HSES10 mounting strap (sold separately) - Terminal Cover (TCSPT1) allows connection of conduit fittings to horn speakers (sold separately) |
- Bogen 15 Watt self amplified 24 Volt horn
- Digital switching amplifier technology greatly reduces current consumption when compared to conventional ananlog self amplified horn loud speakers - Excellent extended frequency response from 1.6 |
- Bogen self-amplified ceiling speaker
- 1 Watt - Ceiling grille with a detachable knob for volume control - 8 |
- 8
|
- Easy assembly saves installation time, effort, and cost
- 1'x2' perforated grille over entire front; off-white or bright white finish - 8 |
-2ft x 2ft with back can enclosure
Low-impedance: 8-ohm speaker, 15W maximum power Fully enclosed, industrial grade steel construction 8 |
- Finely perforated grille over the entire front of speaker
- Fully enclosed, industrial grade steel construction - Enclosed back can - 8'' main cone with secondary high-frequency cone - 70V/25V, 4-watt transformer (4, 2, 1, 0.5, 0.25 watt) taps; selected by rotary switch - Seismic attachment point - Available in off-white and bright white (ôUö versions) grille finish - ''VR'' versions have a recessed volume control (front-mounted) - Complies with requirements of UL-2043 - Support rail crossbar (included) |
-Finely perforated grille over the entire front of speaker
Fully enclosed, industrial grade steel construction Enclosed Back Can 8 |
- Bogen 2 pack of ceiling speakers
- 95Hz - 20kHz Frequency response - 94dB SPL @ 1W / 1m - 100 Degree dispersion @ 2kHz (6dB down) - Treated paper cone - 8 |
-1ft X 2ft drop in ceiling speaker in bright white
-Fast and easy installation -Finely perforated grille over the entire front of speaker -Fully enclosed, industrial grade steel construction -Enclosed back can -8 |
- Bogen 2 ft x 2 ft drop-in speaker
- 70V/25V, 4W transformer (4, 2, 1, .5, .25 watt) taps; selected by rotary switch - 8 |
- Bogen 24V power supply
- 24V DC output @ 1A - Designed to supply power to 24V DC equipment from a 120V AC source - Rugged, versatile, and dependable, and are suitable for use with many types of telephone paging equipment, amplified speakers and horns, tone generators, and intercom systems - Use switching technology to provide large current capacities in smallpackages that gate energy directly to the storage caps at the power supply output. This is a highly efficient way to convert voltages, resulting inminimal heat generation. - Wall-mounted version, includes special mounting holsters for easy and secure wall mounting.The holsters are fastened to the wall and then the power supply is slipped in.The holsterÆs spring action tab ensures the power supply is secure. A side-mounted PCB provides a means of breaking out the power supplyÆs cable connector into multiple screw terminals - Screw terminals are also pluggable for added ease of installation - Offers barrel-type connectors or stripped and tinned wire for flexibility and convenience - UL listed - 2 Year manufacturer's warranty -(+20) Bogen Power Units - BGSPS2410 |
- 24V DC, 600 mA switching power supply
|
- Supplies regulated 24V DC at 300 mA (6 CU) from a 120V AC, 60 Hz source
- Capable of being connected to barrel-type connectors or screw terminal connections via an included adapter - Receptacle-mounted - UL listed |
- 250Watts with a large power reserve
- Capable of handling 70V, 25V, 8-ohm, and 4-ohm speaker loads - 8 module bays - Wide selection of advanced plug-in modules - 2 module bays capable of handling signal processing plug-in output modules - 4 levels of priority between modules - 11-segment LED output level meter monitors the output level of the power amplifier, with Peak and Average meter switch - Motorized master volume control that can be remotely operated - Bass and treble controls - Two-color LED for each channel indicates input active/clipping - Lockable switch permits user to select either transformer-coupled outputs or a direct lowimpedance output - Master mute function overrides all audio from the mixer section of the amplifier - Bass and treble control bypass switch - 125 Hz Lo-cut feature - Signal processing insert jacks allow external equipment to be inserted between the preamp output and the power amp input - Pre-EQ unbalanced buffer output signal ôpostö all unit controls, but ôpreö any external signal processing equipment connected - Grounded convenience receptacle - Available security cover with break-away tabs - 2 rack spaces high (3-1/2") - UL/cUL listed |
- For use with both 2 ft. x 2 ft. and 2 ft. x 4 ft. suspended tile ceilings (support rail crossbar included for 2 ft. x 4 ft. suspended tile ceilings)
- Finely perforated grille covers entire front of speaker - Fully enclosed, industrial grade steel construction - Self-contained 1-watt amplifier - 8 |
- Each ZX3 module provides 3 zones of paging capability (up to 150 self-amplified speakers) to the UTI312 Universal Telephone Interface system
- The UTI312 module bay can accomodate up to fourZX3 modules. |
Pre-assembled 3-Zone PCM System with Power Supply included
Same great features as found in PCM2000 Ready to go right out of the box Expandable up to 99 Zones Emergency All-Zone Override Paging Input 250W Power handling capacity Works with systems that are central- or self-amplified Drives up to 40 self-amplified speakers per zone module RJ11 jacks and terminal blocks |
- Adjusts loudspeaker output levels on 25V and 70V systems
- 2 models control up to 10-watt 35-watt speaker systems - 10 attenuation steps and an off setting - Mounts in standard electrical box - Simple connections |
- High intelligibility and efficiency; ideal for both one-way and talk back applications
- Weatherproof, all-metal construction - 30 watts; 25/70 volt or 8-ohm operation - Tap settings for 70V: 30, 15, 7.5, 3.7, 1.8 watts; for 25V: 15, 7.5, 3.7, 1.8 watts - Rotary tap impedance selector on SPT30A - Tilt and swivel base for easy positioning - Screw terminals make installation fast and easy - All-purpose mounting bracket - Self-aligning, field replaceable diaphragm - Textured mocha enamel finish - Limited lifetime warranty - Mountable to I-beam flange using BogenÆs BC1 Beam Clamp (sold separately) - Mountable to electrical box using BogenÆs HSES10 mounting strap (sold separately) - Terminal Cover (TCSPT1) allows connection of conduit fittings to horn speakers (sold separately) |
- 30 W model
- High-efficiency digital switching amplifier technology - Low DC current draw and heat dissipation - Unique flare shape provides controlled sound dispersion - Operates with continuous background music and at high ambient temperatures - Rotatable horn for vertical or horizontal dispersion - Cast-aluminum swivel mount |
- Bogen C35 Classic series amplifier
- 35 Watts output - 4 inputs: 1 MIC, 1 AUX, 1 TEL, 1 MIC/AUX - Mic precedence circuit - Telephone paging input BGC35 |
- 4Watt capacity
- 4 |
- Bogen 5 pack - SM1EZ and SM4t tile bridge
- BGSMTB |
- 5W model
- Weatherproof housing: all-aluminum construction - Screwdriver-adjustable volume controls - Tilt &swivel mounting brackets for vertical or horizontal positioning - Textured mocha enamel finish - Banding slots for easy mounting on beams and pillars - 4-conductor connection cable included |
- Bogen 5 Watt self amplified 24 Volt horn
- Digital switching amplifier technology greatly reduces current consumption when compared to conventional analog self amplified horn loud speakers - Excellent extended frequency response from 1.6 |
- Self-contained, 6-zone music and paging system with Tuner and MIC, LINE, and AUX inputs
- 35-watt audio output - For use with 4-ohm, 25- or 70-volt speaker systems - Select 1-4 zones for music or paging - 3 external audio inputs: MIC, LINE, and AUX |
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |