Shop by Brand: Bogen

- Gain/Trim control
- High Cut/Low Cut controls
- Voice Enhancement control
- Noise gate w/Threshold control
- Limiter w/Threshold control
- 24V Phantom power
- Mute send & receive
- 4 Priority levels
- Bus assignable
- Electronically balanced
- Screw Terminal

- The Bogen Model MGN19 is a push-button, omni-directional, dynamic microphone designedfor quality sound installations
- The microphone is extremely rugged and reliable and isdesigned to stand up under the most strenuous handling conditions to provide years of dependable service
- A smooth wide band frequency response with a slight intentional

- Bogen microprocessor module for PCM zone paging system
- One required per system
- Provides power, data and audio connections for the PCM system
- Connected to other PCM modules electrically through internal cables
- Modules mechanically joined by sliding together interlocking tabs and securing with a screw on the rear panel
- Designed to be wall-mounted with modules side by side like books (oriented so that when the blue connector blocks are on bottom, PCM-TIM is far left, PCM-CPU is first from left and the first PCM-ZPM module is on the right)
- Includes a set of dip switches that set the SYStem ID, a power LED, a program/run switch, a data link RCA jack (used to connect to satellite systems), power in jack/terminals, and audio connections for PA, low power BGM, high power BGM, emergency/shift change trigger and auxiliary contacts

BGPCMCPU

- Unbalanced input module
- Gain/Trim control
- Bass & Treble controls
- Variable ducking level when muted
- Fade back from mute
- RCA connector

BGMAX1R

- HTA250A Model supplies 250 watts (RMS continuous output)
- Power MOSFET circuitry
- Capable of continuous operation at rated output power
- Frequency response ¦1dB, 20 to 20,000 Hz at full rated output
- Distortion less than 0.5% THD, 20 to 20,000 Hz
- Multiple output voltages/impedances available
- Automatic overload protection
- Listed to UL Standard 60065 for US and Canada

- Bogen multi-zone paging controller
- 3 to 12 Zone
- Provides multi-zone paging for one-way applications such as self-amplified speaker systems, with each output capable of providing audio for up to 150 self-amplified speakers
- Compatible with all standard analog port types
- Comes with a pre-installed ZX3 module for three zones of paging and is expandable up to 12 zones
- Offers up to 24 programmable paging zone groups as well as all-call, auto select, override, night ring, two tone triggers, and code calling zone groups
- Offers flexible dialing
- Telephone interfaces: loop start trunk, ground start trunk, station access (analog ring-up), page port contact closure activation, page port voice activation
- Simple 2-switch interface setup
- Programmable activation of AUX contacts
- C-form contact per zone
- 24V DC,1A internal power supply
- Provides audio drive for up to 150 one-way self-amplified speakers per zone
- Adjustable output limiter with threshold control and active indicator
- Two background music busses, selectable per zone
- Two high-impedance transformer isolated background music inputs
- Stereo combining inputs for background music busses
- All-Call paging zone group
- Auto Select paging zone group
- Override paging (using loop start trunk or page port contact closure activation) with zone group
- Night Ringer (90V and contact closure activation) with zone group
- Two Tone Triggers (tone and duration selectable, closure activated) with individual zone groups
- Select tone burst, chime, double chime, or slow whoop
- Code Calling with zone group
- 2 to 5 Digit dialing with flexible dialing plan for zone and zone group numbers
- Non-volatile memory for setup data (no backup battery required)
- Pre-Announce Tone
- Confirmation Tone
- Setup Tone to assist in volume setting
- Pluggable terminal strips
- Microcontroller-based operation
- DTMF programming
- DTMF Block to help suppress DTMF tones over paging system
- Programmable timers control page duration (station and trunk)
- Wall- or Rack-mountable
- 2 Year manufacturer's warranty
- (+20) Bogen power units
- Accessory modules BG-ZX3 sold separately
- BGUTI312

- Responds to 90V ring signals or external contact closures
- Produces dual-frequency electronic ringer tone
- Easily connects to any paging system
- Automatically mutes background music while ringing
0- Ringer volume control
- Compact size
- Low current draw

-140-degree wide-dispersion coaxial driver for broad even coverage
Stable, high definition metal-alloy woofer cone
6-1/2

- Wide dispersion coaxial driver for broad, even 140¦ coverage
- Stable, high definition metal-alloy cone
- MDT cone design delivers detailed sound
- MLS eliminates conventional centering ôspiderö for more accurate voice coil centering
- High-efficiency drivers deliver superior performance
- Extremely good off-axis response
- Computer-matched venting system for full bass output
- High power handling capability for foreground sound
- Selectable power taps via front-mounted control
- 16-ohm input for non-transformer multi-speaker systems
- Easy wiring with snap-on connector
- Connector provides loop-through to next speaker
- Easy to use cable suspension system that includes three 13 inch long color-matched suspension cables with attached forged eyebolts
- Threaded brass insert point for optional safety cable eye bolt
- Low-resonance cabinet structure
- Off-white or dark gray textured finish; easily painted to match theme decors
- Attractive, contemporary, sturdy steel grille assembly with fine perforations
- Listed to UL Standard 60065 for US and Canada
- Accessory 10-foot long cable kit for use as main drop cable or safety cable (Model CK10 sold separately)

- Wide dispersion coaxial driver for broad, even 140¦ coverage
- Stable, high definition metal-alloy cone
- MDT cone design delivers detailed sound
- MLS eliminates conventional centering ôspiderö for more accurate voice coil centering
- High-efficiency drivers deliver superior performance
- Extremely good off-axis response
- Computer-matched venting system for full bass output
- High power handling capability for foreground sound
- Selectable power taps via front-mounted control
- 16-ohm input for non-transformer multi-speaker systems
- Easy wiring with snap-on connector
- Connector provides loop-through to next speaker
- Easy to use cable suspension system that includes three 13 inch long color-matched suspension cables with attached forged eyebolts
- Threaded brass insert point for optional safety cable eye bolt
- Low-resonance cabinet structure
- Off-white or dark gray textured finish; easily painted to match theme decors
- Attractive, contemporary, sturdy steel grille assembly with fine perforations
- Listed to UL Standard 60065 for US and Canada
- Accessory 10-foot long cable kit for use as main drop cable or safety cable (Model CK10 sold separately)

- 120 Watts of Power
- 4 Dedicated microphone inputs (XLR connectors MIC 1-4) with selectable phantom power
- 1 Selectable MIC 5/TEL input
- 1 Selectable MIC 6/AUX 1 input
- 1 Dedicated AUX 2 input
- 8-ohm, 25V/70V speaker output
- Standard 19ö rack mountable û 2RU package for all models
- 5-band full parametric equalizer with independent Gain, Frequency, and Q controls
- True loudness contour function on AUX 1 and AUX 2
- Audio Enhancement feature for improved voice intelligibility with adjustable level
- Lo-cut filter for all MIC channels
- Selectable AUX input muting during TEL paging: -60, -21, -10, and 0dB
- VOX sensitivity adjust

- 240 Watts of Power
- 4 Dedicated microphone inputs (XLR connectors MIC 1-4) with selectable phantom power
- 1 Selectable MIC 5/TEL input
- 1 Selectable MIC 6/AUX 1 input
- 1 Dedicated AUX 2 input
- 8-ohm, 25V/70V speaker output
- Standard 19ö rack mountable û 2RU package for all models
- 5-band full parametric equalizer with independent Gain, Frequency, and Q controls
- True loudness contour function on AUX 1 and AUX 2
- Audio Enhancement feature for improved voice intelligibility with adjustable level
- Lo-cut filter for all MIC channels
- Selectable AUX input muting during TEL paging: -60, -21, -10, and 0dB
- VOX sensitivity adjustment for TEL paging

- 600 Watts of Power
- MIC 1-4) with selectable phantom power
- 1 Selectable MIC 5/TEL input
- 1 Selectable MIC 6/AUX 1 input
- 1 Dedicated AUX 2 input
- 8-ohm, 25V/70V speaker output
- Standard 19ö rack mountable û 2RU package for all models
- 5-band full parametric equalizer with independent Gain, Frequency, and Q controls
- True loudness contour function on AUX 1 and AUX 2
- Audio Enhancement feature for improved voice intelligibility with adjustable level
- Lo-cut filter for all MIC channels
- Selectable AUX input muting during TEL paging: -60, -21, -10, and 0dB
- VOX sensitivity adjustment for TEL paging

- 60 Watts of Power
- 4 Dedicated microphone inputs (XLR connectors MIC 1-4) with selectable phantom power
- 1 Selectable MIC 5/TEL input
- 1 Selectable MIC 6/AUX 1 input
- 1 Dedicated AUX 2 input
- 8-ohm, 25V/70V speaker output
- Standard 19ö rack mountable û 2RU package for all models
- 5-band full parametric equalizer with independent Gain, Frequency, and Q controls
- True loudness contour function on AUX 1 and AUX 2
- Audio Enhancement feature for improved voice intelligibility with adjustable level
- Lo-cut filter for all MIC channels
- Selectable AUX input muting during TEL paging: -60, -21, -10, and 0dB
- VOX sensitivity adjustment for TEL paging

- 19ö 2U Rack mount installation kit

- 60W model
- 1 input: Hi-Z unbalanced
- Lo-Z balanced input with accessory transformer (TL600)
- Input level control and lo-cut filter switch
- 8-ohm/25V, 16-ohm, 25VCT, and 70V outputs
- Provides continuous high-quality sound

-Switching technology provides large current capacity in compact package
-Easy and secure wall mount with holster
-Generates little heat
-UL listed

- 24V DC/2.5A Power Supply

- Input: 120V AC, 60 Hz
- Output: 12V DC, 300 mA Unregulated
- UL listed

- Bogen loop start interface/power supply
- 24V talk battery supply for loop start ports
- Buffered audio output for up to 25 self-amplified speakers
- 450 mA, 24V DC power supply for external equipment
- Integral flange and rubber feet for wall or shelf mounting
- 6 Terminal barrier strip
- UL and C-UL listed
BGPRSLSI

Rack Mouting Kit
-Designed for wall-mount applications, but can also be mounted in a standard 19

-Power Vector Amplifier Rack Mounting Kit
2 rack spaces high
1" W x 3-1/2" H x 3-3/4" D

Rack Mount Kit(PCM2000)

- Bogen rack panel mount kit
- For the C35, C60, C100
BGRPK50

- Rack Mount & Security Cover for UTI1
- The RPKUTI1 Rack Mount and Security Cover provides protection against tampering of the UTI1 settings and connections and offers the option of rack mounting the UTI1. Knockout sections on both the cover and the rack ears are provided to facilitate wire entry and exit.

- Transformer-balanced
- Phantom power
- Screw terminal connections
- Gain/trim control
- Bass and treble controls
- Audio gating
- Gating threshold and duration adjustments
- Variable threshold limiter
- Limiter activity LED
- 4 Levels of available priority
- Can be muted from higher priority modules
- Can mute lower priority modules

MGMIC1S

Replacement grille

- Bogen round recessed ceiling speaker enclosure
- Protective enclosure for an 8

- 4W capacity
- 8

- 4W capacity
- 8

-Installs in less than a minute
Self-contained 1W amplifier
High intelligibility and sensitivity
Wide-range frequency response
Direct and reflected sound paths create wide dispersion angle
Lightweight and durable plastic shell with an off-white, paintable finish
Simple, three-step installation process
No tool(s) installation
Color-coded mounting studs identify polarity to make the power and audio connections easier (no external wires)
Front-mounted volume control for easy access
Transformer-isolated, balanced audio input
Can be installed in any drop ceiling with standard ceiling tiles
Surface-mounting design eliminates need to cut ceiling tile, no mess installtion
Contemporary design blends/matches any decor
O-ring seal holds speaker tight to ceiling surface, eliminating whistling and ensures smoother sound without peaks
Textured studs easily pierce ceiling tile and secure wire nut connections
Wide-bottom, easy-to-handle mounting wing nuts provide secure speaker mounting
All necessary mounting hardware included
Tile Bridge available for weight distribution (model SMTB, SOLD SEPARATELY)
Complies with NFPA National Code 160b and UL-2043