This Data Interface Harness for select 2006 to 2017 GM vehicles allows you to easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions. Provides accessory power 12 volt 10 amp retains RAP retained accessory power provides NAV outputs Parking Brake Reverse and Speed Sense retains chimes through an onboard speaker is Micro B USB updatable and is designed for non amplified models analog amplified models Feature:
|
The Data Interface with SWC for 2006 and Up GMs provides accessory power as well as retains RAP. It also retains chimes the audio controls on the steering wheel OnStar factory Bluetooth factory backup camera rear seat entertainment and satellite radio. This interface comes with an antenna adapter. Feature:
|
|
|
|
The GMOS LAN 012 is designed to retain OnStar OE satellite and retain the warning chimes that are normally lost when the OEM radio is removed. Provides a 12 volt accessory output for aftermarket radio operation. The GMOS LAN 012 also provides a mute parking brake vehicle speed sense and a reverse output to make installing an aftermarket navigation radio simple and less time consuming. Feature:
|
|
|
AX-HON24RVC W/ 6 VOLT CONVERT Feature:
|
Improve the functionality of your 2010 and up Hyundai or Kia vehicle with this Axxess radio replacement interface. Equipped with navigation outputs for the parking brake reverse and speed sense it automatically detects and configures itself to the vehicle for smooth performance. This Axxess radio replacement interface is plug-and-play for fast effortless installation. Feature:
|
This Backup Camera Wiring Harness for select 2013 and up Hyundai and Kia vehicles without NAV allows you to easily remove the factory stereo and replace it with an aftermarket stereo and retain the factory backup camera or allows an aftermarket camera to be added to the factory screen. Feature:
|
This Amplifier Retention Interface Harness for select 2011 to 2016 Hyundai and Kia vehicles allows you to install an aftermarket stereo and converts your new stereo analog output to a digital signal that works with the factory amp. The converter connects to AX HYKIA1 SWC or AX HYKIA1 SWC2 wiring interface |sold separately|. Feature:
|
AXBUCH6VHK2 HYUNDAI KIA With NAV BACKUP CAMERA RETAIN ADDON 2014 to 2017
|
|
This Amp Interface Module with Steering Wheel Control Retention for select 2003 to 2014 Lexus|Toyota vehicles allows you to easily remove the factory stereo and replace it with an aftermarket stereo and retain factory functions. Provides accessory power |12 volt 10 amp| and NAV outputs |Parking Brake and Reverse|. Retains R.A.P. |Retained Accessory Power| audio controls on the steering wheel factory Aux In jack balance is Micro B USB updatable and is designed for amplified models. Includes Feature:
|
This interface retains the OEM steering wheel controls when replacing the OEM radio with an aftermarket radio. No additional interfaces needed. Automatically programs the buttons on the steering wheel and auto detects what radio it is connected to. Works with all major radio brands. All connections are made behind the radio. Feature:
|
Are you working on select Mazda 2007 through 2015 vehicles? Then you may need the AXBUCH-MZ6V Backup Camera Retention/Add-on Interface from Axxess. It retains the factory backup camera to an aftermarket radio and allows an aftermarket camera to be added to an OEM screen. It includes the AXCSD-6V 12-volt to 6-volt converter. Do the job right with Axxess!
|
This Data Interface Harness for select 2001 and up Mercedes Benz vehicles allows you to easily remove the factory stereo and replace it with an aftermarket stereo and retain all of the factory functions. Provides accessory power |12 volt 10 amp| and NAV outputs |Parking Brake Reverse and Speed Sense|. Retains R.A.P. |retained accessory power| balance and fade is Micro B USB updatable and is designed for non amplified models or bypassing amplifiers. Includes pre wired ASWC 1 harness |ASWC 1 module sold separately|
|
This Interface and Retention Harness for select 2014 and up Mitsubishi vehicles allows you to install an aftermarket stereo and retain the use of the factory amplifier. The USB updatable module also provides parking brake reverse and speed sense outputs for installing a navigation receiver. The interface is prewired to plug into the ASWC 1 module |sold separately| in order to retain the use of your steering wheel controls.
|
|
|
|
|
This Back Up Camera Interface Harness for select 2012 and up GMC Chevrolet and Cadillac vehicles allows you to retain the factory installed backup camera when you install a new car stereo. Feature:
|
This RSE Retention Harness for select 2007 and up GM vehicles with rear seat entertainment systems is designed to allow the installation of an aftermarket radio and provide an audio|video input to the OEM overhead video screen from the aftermarket radio and provide the audio|video input from the rear seat control panel to the aftermarket radio. Feature:
|
AXVI1784 This Non amplified Non On star interface wiring harness for select 2007 to 2008 Dodge Sprinter Vans allows you to install an aftermarket car stereo and retain accessory power also provides navigation output wires 12V DC accessory output VSS parking brake and reverse outputs. Feature:
|
METRA AXSSOGM is for GM 2016 thru current year. This item allows the override of the STOP/START engine feature
and can be used with either a factory or aftermarket radio. No programming required and a simple 2-wire setup |
Allows retention of the OEM camera to an aftermarket radio, It is highly recommended to use the AXCSD-6V (sold separately) to provide the camera with the proper voltage.
|
This 5 pin Backup Camera Retention Wiring Harness for select 2015 and up Subaru vehicles allows you to easily remove the factory stereo and replace it with an aftermarket stereo and retain the factory backup camera. Harness includes AX CAM6V 12 volt to 6 volt converter. Feature:
|
This Harness for 2015 and Up Subarus with 6.2in screen and without NAV retains the factory backup camera and the factory aux input It also comes with a 12 volt to 6 volt converter. Feature:
|
This USB Port Retention Interface Harness for select 2012 to 2013 Toyota and Lexus vehicles allows you to install an aftermarket stereo and retain the rear USB input port. Feature:
|
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |