Shop by Brand: Axxess

This Wiring Interface Harness for select 2006 to 2013 BMW and 2007 to 2014 Mini Cooper vehicles without amplified systems lets you replace the factory radio and install an aftermarket radio to the factory wiring and retain your factory warning chimes an important safety feature. Harness can also be used in your Mini or BMW vehicle if you plan on replacing the factory amplifier.

Feature:

• Provides Accessory (12-Volt 10-Amp)
• Retains R.A.P. (Retained Accessory Power)
• Used In Non-Amplified or when Bypassing an Amplified System
• Retains All Warning Chimes through Onboard Speaker
• Low Profile Case
• Micro-B Updatable
• Pre-Wired ASWC-1 Harness (ASWC-1 Sold Separately)

Interface designed to allow for the replacement of the OEM Radio with an aftermarket unit in amplified Cadillac vehicles with Premium or Bose audio systems. Retains full functionality of the OnStar system with adjustable volume output.

Feature:

• Provides accessory power (12-Volt 10-Amp)
• Navigation outputs included
• Retains Onstar with adjustable volume outputs
• Retains chime with adjustable volume output

Backup Camera and RSE Retention Harness for select 2008 to 2013 Chrysler Dodge and Jeep vehicles allows you to install an aftermarket radio and retain the factory rear seat entertainment system and backup camera. Provides two Audio and Video signals to be sent to the RSE System. This harness must be used in conjunction with the Axxess XSVI 6522 NAV CHTO 03 or the CHTO 013 Radio Replacement Module.

Feature:

• Allows two audio and video signals to be sent to the RSE system
• Retains the backup camera
• Requires the CHTO-03 to operate
• Designed for overhead video monitors without a DVD player built-in

This Data Interface with Steering Wheel Controls for select 2004 and up Chrysler vehicles allows you to easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions. Retains audio controls on the steering wheel and safety chimes.

Feature:

• Provides accessory power (12-Volt 10-Amp)
• Retains R.A.P. (Retained Accessory Power)
• Retains blind spot detection (if equipped)
• Retains audio controls on the steering wheel

Radio Replacement Interface Module The Axxess LCCHRC01 interface is designed to allow you to replace the factory radio of select Chrysler vehicles with an aftermarket head unit while retaining many factory features that are normally lost when the factory radio is removed. Can be used in vehicles with no factory amplifier or in vehicles when bypassing the factory amplifier. Retains your vehicle's factory park assist chimes if equipped through an onboard speaker in the interface module.

Feature:

• Provides accessory power 12 Volt 10 Amp
• Retains R A P Retained Accessory Power
• Provides NAV outputs parking brake reverse speed sense
• Retains safety chimes the 3.5mm AUX IN jack balance and fade

This Data Interface with Steering Wheel Controls for select 2013 and up Chrysler vehicles allows you to easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions. Retains R.A.P. |retained accessory power| audio controls on the steering wheel and safety chimes and provides accessory power |12 volt 10 amp|. Can be used in non amplified models or when bypassing a factory amplifier |except in Fiat 500L|

Feature:

• Provides Accessory Power (12-Volt 10-Amp)
• Retains the factory AUX-IN jack
• Provides NAV outputs: parking brake reverse speed sense
• Used In non-amplified models or when bypassing a factory amplifier

The GMOS 13 is designed to be used in the 2005 to 2010 Cadillac STS equipped with OnStar and amplified system. It will retain the warning chimes that are lost when the factory radio is removed. The GMOS 13 also provides a 12 volt switched accessory output along with Mute Parking Brake Speed Sense |VSS| and Reverse outputs for the installation of an aftermarket navigation radio.

Feature:

• Provides accessory power (12-Volt 10-Amp)
• Retains OnStar OE Bluetooth and RAP (retained accessory power) functions
• NAV outputs: mute parking brake speed sense (VSS) and reverse outputs
• Retains chimes

This data interface for select 2000 to 2013 GM vehicles provides accessory power |12 volt 10 amp| retains R.A.P. |retained accessory power| provides NAV outputs |Parking Brake Reverse and Speed Sense| and is designed for non-amplified models analog amplified models or when bypassing a factory amp.

Feature:

• Provides accessory power (12-Volt 10-Amp)
• Retains R.A.P (Retained Accessory Power
• Provides NAV Outputs parking brake reverse speed sense
• Retains chimes through an onboard speaker

The Data Interface with SWC for 2000 to 2013 GMs provides accessory power as well as retains RAP chimes audio controls on the steering wheel and the factory auxiliary input. It also retains OnStar and the OE Bluetooth. It is for use in nonamplified models or analog digital amplified models.

Feature:

• Retains rear seat entertainment & satellite radio
• Retains audio controls on steering wheel
• Retains OnStar OE Bluetooth
• Adjustable OnStar level