Flush Mount Rod Holder - 0 Degree & 9" Depth - Stainless Steel - Cast Bottom - White Vinyl Liner These larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance or add a drain tube and use it when there is dry storage space under the rod holder. This rod holder features a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed to the gimbal, so the liner stays in place. Features:
Specifications:
|
Stainless Steel Rod Holders
These larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder. They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in place
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
FLUSH MOUNT
Stainless Steel Rod Holders
Made of 100% 316 stainless steel, these flush mount gunnel rod holders feature an extra large, low profile cap to enhance the appearance of any boat. They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl linder protects rods and is keyed with the gimbal bar so the liner stays in place. Standard 70 Series models have a tube depth of 9", and I.D. of 1-5/8".
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Flush Mount Rod Holder - 15 Degree & 9" Depth - Stainless Steel - Cast Gimbal - White Vinyl Liner These larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance or add a drain tube and use it when there is dry storage space under the rod holder. This rod holder features a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed to the gimbal, so the liner stays in place. Features:
Specifications:
|
Stainless Steel Rod Holders
These larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder. They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in place
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
FLUSH MOUNT
Stainless Steel Rod Holders
Made of 100% 316 stainless steel, these flush mount gunnel rod holders feature an extra large, low profile cap to enhance the appearance of any boat. They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl linder protects rods and is keyed with the gimbal bar so the liner stays in place. Standard 70 Series models have a tube depth of 9", and I.D. of 1-5/8".
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Flush Mount Rod Holder - 30 Degree & 9" Depth - Stainless Steel - Cast Bottom - White Vinyl Liner These larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance or add a drain tube and use it when there is dry storage space under the rod holder. This rod holder features a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed to the gimbal, so the liner stays in place. Features:
Specifications:
|
Stainless Steel Rod Holders
These larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder. They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods and is keyed with the gimbal so the liner stays in place
|
Grease Seals f/1" to 1-1/16" Straight Spindle
Product Description Need to reseal trailer wheels? No need to purchase an entire wheel bearing set when all you need are the seals. Smith "double-lip seals with gripper springs" are the best available and provide a tight long lasting seal. Features:
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm, and CADMIUM which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Heavy Duty Spare Tire Carrier
27310G Get that spare tire out of your way, mount it up on its side and it looks great too. Hot dipped galvanized for lasting protection. Holds either 4 or 5 lug wheels and fits all trailers frames up to 3" wide by 4" high. Extra heavy duty welded steel construction for worry free trailering. Offset height raises tire and provides additional ground clearance. WARNING: This product can expose you to chemicals including LEAD,Chromium (hexavalent compounds) which are known to the State of California to cause cancer, birth defects or other reproductive harm, and NICKEL (METALLIC),COBALT METAL POWDER,BERYLLIUM which are known to the State of California to cause cancer, and ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Jon Boat Support Bunk & Bracket Assembly
24" carpeted bunk mounts crossways on the trailer tongue to support the flat bottom of a Jon boat. Adjustable from 5-1/2" up to 8" above tongue. Includes all mounting hardware for a 2" or 3" wide tongue. Board is covered with high quality, marine grade carpet. Sold individually. WARNING: This product can expose you to chemicals including LEAD,Chromium (hexavalent compounds) which are known to the State of California to cause cancer, birth defects or other reproductive harm, and NICKEL (METALLIC),COBALT METAL POWDER,BERYLLIUM which are known to the State of California to cause cancer, and ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Knife Plier Rack and Tackle
**Knives, Plier and lures not included** |
LED Post Guide Light Kit
These tough, long lasting, waterproof and shockproof LED post guide lamps make it easy to see your trailer's position when backing down the ramp and dramatically increase your trailer's visibility over the road at night. One piece lamps fit easily on top of your existing 2" PVC post guide-ons. Amber light faces front, red faces rear. Includes two sealed one piece LED lamps, each with 8' of wire and all necessary electrical connectors and post locking bolts. |
License Plate Bracket
Upgrade the appearance of your trailer with an aluminum tread plate license plate bracket. Fits standard left side DOT brake/tail lamps. No mounting hardware required. Installs between existing tail light mounting bracket and the left side tail light via the lamp's two mounting studs.
|
Outboard Motor Dolly - 250lb. - Red Made from 14 gauge powder coated steel with a weather resistant synthetic wood mounting block this outbord motor dolly makes it easy to transport and hold your motor weighing up to 250 lbs. 8” wheels and 4" casters with an overall height of 45”, enough to fit a long shaft outboard motor. This outboard motor dolly folds flat to easy storage when not in use. Some assembly required. |
Outrigger Rod Holder with Liner & Strap - Aluminum Features:
|
Package Roller Shaft 1/2" x 12-3/4" with Cap Nuts - Zinc Roller shafts blister packed each with two cap nuts. Features:
|
Package Roller Shaft 1/2" x 5-1/4" with Cap Nuts - Zinc Roller shafts blister packed each with two cap nuts. Features:
|
Package Roller Shaft 1/2" x 6-1/4" with Cap Nuts - Zinc Roller shafts blister packed each with two cap nuts. Features:
|
Panel Bracket Assembly 10" Keel Roller - Black
Product Description Pre-assembled for easy installation! Strong hot-dipped galvanized bracket with black rubber roller for proper keel support. Mounting slots are 8" on center. |
Panel Bracket Assembly 12" Keel Roller - Yellow TPR
Product Description Pre-assembled for easy installation! Strong hot-dipped galvanized bracket with yellow rubber roller for proper keel support. Mounting slots are 10" on center |
Panel Bracket Assembly 12" Keel Roller - Black
Product Description Pre-assembled for easy installation! Strong hot-dipped galvanized bracket with black rubber roller for proper keel support. Mounting slots are 10" on center |
Panel Bracket Assembly 4"Spool Roller - Black
Product Description Pre-assembled for easy installation! Strong hot-dipped galvanized bracket with 4" black rubber spool roller for proper keel support. Mounting slots are on 2" centers. |
Panel Bracket Assembly 5" Keel Roller - Black
Product Description Pre-assembled for easy installation! Strong hot-dipped galvanized bracket with black rubber roller for proper keel support. Mounting slots are 3" on center. |
Panel Bracket Assembly 8" Keel Roller - Black
Product Description Pre-assembled for easy installation! Strong hot-dipped galvanized bracket with black rubber roller for proper keel support. Mounting slots are 6" on center |
Pontoon Bolster Bracket - 15-3/4" x 2" Pontoon bolster brackets support bunkboards in a shallow V cradle configuration that best suits pontoon hulls. Best when installed with 2x6, 2x8, or 2x10 carpeted bunk boards laid flat. A bracket should be installed at each frame cross member for maximum support and load capacity. |
Pontoon Post Guide-On
Loading your pontoon boat onto your trailer is much easier with post guide-ons. These guide-ons mount on top of rear cross member and fit in between the pontoons to center your boat on the trailer. Steel arms are made of 1-1/2" galvanized tubing and extend fully into sturdy 2" PVC tubes. Fit up to 3" x 4-1/4" frames. 22" high. Sold in pairs. WARNING: This product can expose you to chemicals including LEAD,Chromium (hexavalent compounds) which are known to the State of California to cause cancer, birth defects or other reproductive harm, and NICKEL (METALLIC),COBALT METAL POWDER,BERYLLIUM which are known to the State of California to cause cancer, and ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Pontoon Square Rail Adjustable Clamp On Rod Holder
All the same great features as the 304L stainless adustable clamp-on (55105A) with a clamp made to fir the square rails found on pontoon boats. Each rod holder comes with 2 protective liners, one to fit 1" and one to fit 1-1/4" square rail. The liners are round on the outside allowing the rod holder to be adjusted to any angle above the water, and the hidden left or right adjustment allows even more adjustment choices.
|
Pontoon Wing Bracket
Pontoon bolster brackets support bunk boards in a shallow V cradle configuration that best suits pontoon hulls. This V-wing bracket is designed with a 7" lateral adjustment slot for perfect pontoon to trailer alignment.
A bracket should be installed at each frame cross member for maximum support and load capacity. |
Post Guide-On Pad - 48" - Camo Wet Lands The Post Guide-On Covers protect the boat finish from scuffs. They are sized for a close fit on standard 2" schedule 40 PVC posts (2-3/8" actual outer diameter). Covers are made from strong polyurethane-coated 600D nylon fabric with nylon closures on each end. Open the bottom and top to allow for an LED guide on lamps. 1/2" thick closed-cell polyurethane foam inner pad. Features:
|
PVC 40" Post Guide-On with Unlighted Posts & FREE Camo Wet Lands Post Guide-On Pads This kit includes two PVC 40" Post Guide-Ons With Unlighted Posts and two Camo Wet Lands Post Guide-On Pads. The PVC posts allow you to see the location of your trailer when it's underwater. The 2" PVC tubes make it easy to see your trailer's position when backing down the ramp. The camo post-guide-on pads are used to protect the boat finish from scuffs. They are sized for a close fit on standard 2" schedule 40 PVC posts (2-3/8" actual outer diameter). Features:
Kit Includes:
Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width *Sold in pairs |
PVC Replacement Cap - Pair PVC Replacement Cap for 2" Trailer Boat Post Guide. |
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |