Shop by Brand: C.E. Smith

60" PVC Post Guide-On w/Unlighted Posts - Black

These Post Guide-Ons allow you to see the location of your trailer when it's under water. The 2" PVC tubes make it easy to see your trailer's position when backing down the ramp.

Features:

• Mounting hardware included
• Sold in pairs
• Adjusts out to 13" each side
• Fits Frames up to 3" W x 4-1/4" H
• 1-1/2" square, 16 gauge pre-galvanized steel uprights
• 39" high
• 2" schedule 40 white PVC posts (2-3/8" actual OD)
• Stands 60" above the trailer frame with Black post caps
• Installation Instructions
• Made in the USA

Fits trailer frames up to 3" wide x 5-1/4" tall

Note: Check with your state Department of Transportation for restrictions regarding maximum trailer width.

Pre-Galvanized Steel

Pre-galvanized steel parts are stamped from a sheet of steel after it has already been galvanized. The galvanized coating is very thin (0.45 oz. on each side).

WARNING: This product can expose you to chemicals including LEAD,Chromium (hexavalent compounds) which are known to the State of California to cause cancer, birth defects or other reproductive harm, and NICKEL (METALLIC),COBALT METAL POWDER,BERYLLIUM which are known to the State of California to cause cancer, and ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Mounting hardware included
  
• Sold in pairs
  
• Adjusts out to 19" on each side
  
• Fits frames up to 3"W x 5-1/4" H
  
• 1-1/2" square, 16 gauge pre-galvanized steel uprights, 36" high
  
• 2-3/8" diameter white PVC posts

WARNING: This product can expose you to chemicals including LEAD,Chromium (hexavalent compounds) which are known to the State of California to cause cancer, birth defects or other reproductive harm, and NICKEL (METALLIC),COBALT METAL POWDER,BERYLLIUM which are known to the State of California to cause cancer, and ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Mounting hardware included
  
• Sold in pairs
  
• Adjusts out to 19" each side
  
• Fits frames up to 3" W x 5-1/4" H
  
• 1-1/2" square, 16 gauge pre-galvanized steel uprights
  
• 2-3/8" diameter white PVC posts

WARNING: This product can expose you to chemicals including LEAD,Chromium (hexavalent compounds) which are known to the State of California to cause cancer, birth defects or other reproductive harm, and NICKEL (METALLIC),COBALT METAL POWDER,BERYLLIUM which are known to the State of California to cause cancer, and ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.

8"-5/8" Keel Roller Black Natural Rubber

Black natural rubber rollers are original equipment on many trailers. Fits standard brackets and shaft sizes.

Features:

• Black natural rubber
• 3-3/8" Diameter
• 7-7/8" wide
• 5/8" shaft

Adjustable Mid Mount Rod Holder - 1-1/4" or 1-5/16" OD - White Powder Coat Aluminum with Sleeve & Hex Key

C.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.

Features:

• Style: Adjustable Mid Mount
• Fits rails with 1-1/4" or 1-5/16" measured OD
• Made from Marine Grade Aluminum

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Adjustable Mid Mount Rod Holder - 1.66" or 1-1/2" OD - White Powder Coat Aluminum with Sleeve & Hex Key

C.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.

Features:

• Style: Adjustable Mid Mount
• Fits rails with 1.66" or 1-1/2" measured OD
• Made from Marine Grade Aluminum

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Adjustable Mid Mount Rod Holder - 7/8" or 1" OD - White Powder Coat Aluminum with Sleeve & Hex Key

C.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.

Features:

• Style: Adjustable Mid Mount
• Fits rails with 7/8" or 1" measured OD
• Made from Marine Grade Aluminum

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Adjustable Mid Mount Rod Holder Aluminum 1-1/4" or 1-5/16" with Sleeve & Hex Key

These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.

Features:

• Style: Adjustable Mid Mount
• Fits rails with 1-1/4" or 1-5/6" measured OD
• Made from Marine Grade Aluminum

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Adjustable Mid Mount Rod Holder Aluminum 1.66" or 1-1/2" with Sleeve & Hex Key

These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.

Features:

• Style: Adjustable Mid Mount
• Fits rails with 1.66" or 1-1/2" measured OD
• Made from Marine Grade Aluminum

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Made of polished 100% anodized marine grade aluminum for functionality and style
  
• Holds poles with a 1-1/2" base
  
• Precision machined
  
• Fits inside rod holders for easy use

Aluminum Clamp-On Rod Holder - Horizontal - 1.05" OD

Smith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.

These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.

These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Aluminum Clamp-On Rod Holder - Horizontal - 1.315" OD

Smith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.

These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.

These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Aluminum Clamp-On Rod Holder - Horizontal - 1.66" OD

Smith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.

These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.

These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Aluminum Clamp-On Rod Holder - Horizontal - 1.90" OD

Smith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.

These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.

These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Aluminum Clamp-On Rod Holder - Horizontal - 2.375" OD

Smith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.

These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.

These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Aluminum Clamp-On Rod Holder - Vertical - 1.315" OD

Smith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.

These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.

These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Aluminum Clamp-On Rod Holder - Vertical - 1.66" OD

Smith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.

These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.

These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.

Aluminum Clamp-On Rod Holder - Vertical - 1.90" OD

Smith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.

These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.

These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Aluminum Clamp-On Rod Holder - Vertical - 2.375" OD

Smith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.

These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.

These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Aluminum Horizontal Clamp-On Rod Holder OD - White Powder Coated with Sleeve

C.E. Smith's line of white powder coated clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.

Features:

• Style: Horizontal
• Fits rails with 1.66" measured OD
• Made from Marine Grade Aluminum

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Aluminum Vertical Clamp-On Rod Holder 1-27/32" OD White Powdercoat with Sleeve

Smith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.

These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.

These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Aluminum Vertical Clamp-On Rod Holder 1-5/16" OD White Powdercoat with Sleeve

Smith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.

These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected.

These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want.

WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Angled Post Guide On - 40" - Black

Providing an easy visual while centering your boat.

The angled PVC Post Guide-Ons allow you to easily center your boat on your trailer at the ramp.

Features:

• Fits trailer frames 3-1/4” wide by 4” tall
• Mounts above or below the trailer frame
• Adjusts up to 13” away from the trailer frame
• Angled to allow for wide or flared hulls
• 40” Tall
• For larger frames use with P/N 11416 mounting U-bolts

Angled Post Guide On - 40" - White

Providing an easy visual while centering your boat.

The angled PVC Post Guide-Ons allow you to easily center your boat on your trailer at the ramp.

Features:

• Fits trailer frames 3-1/4” wide by 4” tall
• Mounts above or below the trailer frame
• Adjusts up to 13” away from the trailer frame
• Angled to allow for wide or flared hulls
• 40” Tall
• For larger frames use with P/N 11416 mounting U-bolts

Angled Post Guide-On - 40" - Black with FREE Camo Wet Lands 36" Guide-On Cover

Angled Post Guide-On - 40" - Black

Providing an easy visual while centering your boat. The angled PVC Post Guide-Ons allow you to easily center your boat on your trailer at the ramp.

Features:

• Fits trailer frames 3-1/4” wide by 4” tall
• Mounts above or below the trailer frame
• Adjusts up to 13” away from the trailer frame
• Angled to allow for wide or flared hulls
• 40” Tall
• For larger frames use P/N 11416 mounting U-bolts

Post-Guide-On Pad - 36" - Camo Wet Lands

The Post Guide-On Covers protect the boat finish from scuffs. They are sized for a close fit on standard 2" schedule 40 PVC posts (2-3/8" actual outer diameter). Covers are made from strong polyurethane-coated 600D nylon fabric with nylon closures on each end. Open the bottom and top to allow for an LED guide on lamps. 1/2" thick closed-cell polyurethane foam inner pad.

Features:

• Length: 36"
• Color: Camo Wet Lands
• Sold in Pairs

Angled Post Guide-On - 40" - White with FREE Camo Wet Lands 36" Guide-On Cover

Angled Post Guide-On - 40" - White

Providing an easy visual while centering your boat. The angled PVC Post Guide-Ons allow you to easily center your boat on your trailer at the ramp.

Features:

• Fits trailer frames 3-1/4” wide by 4” tall
• Mounts above or below the trailer frame
• Adjusts up to 13” away from the trailer frame
• Angled to allow for wide or flared hulls
• 40” Tall
• For larger frames use P/N 11416 mounting U-bolts

Post-Guide-On Pad - 36" - Camo Wet Lands

The Post Guide-On Covers protect the boat finish from scuffs. They are sized for a close fit on standard 2" schedule 40 PVC posts (2-3/8" actual outer diameter). Covers are made from strong polyurethane-coated 600D nylon fabric with nylon closures on each end. Open the bottom and top to allow for an LED guide on lamps. 1/2" thick closed-cell polyurethane foam inner pad.

Features:

• Length: 36"
• Color: Camo Wet Lands
• Sold in Pairs

Axel Tie Plate Kit for 3" Round Axel

Everything needed to mount fresh springs to an axle. 

Each Blister packaged kit includes: 

• 2 galvanzied tie plates 
• 4 yellow zinc plated u-bolts
• 8 zinc plated nuts
• Lock washers

• 2 galvanized tie plates
  
• 4 yellow zinc plated U-bolts
  
• 8 zinc plated nuts and lock washers

• 2 galvanized tie plates
  
• 4 yellow zinc plated U-bolts
  
• 8 zinc plates nuts and lock washers

• 2 galvanized tie plates
  
• 4 yellow zinc plated U-bolts
  
• 8 zinc plated nuts and lock washers