The XCU01Z Chain Saw has a 4-1/2" guide bar and the Makita-built motor delivers 980 FPM for increased cutting speed. The cordless XCU01Z has zero emissions and reduced maintenance, with no need to drain the fuel for storage. Simply pickup the LXCU01Z, load an 18V LXT Lithium-Ion battery (sold separately), and the saw is ready to use.

Feature:

• The Perfect Chain Saw for Limbing, Powered by 18V LXT
• 4-1/2" guide bar is ideal for limbing
• Tool-less" chain adjustments
• Zero emissions and reduced maintenance
• Compact and ergonomic design at only 16-5/8" long & 5.4 lbs
• Electric brake for maximum productivity

The Makita 18V LXT Lithium-Ion Cordless Blower (model DUB182Z, tool only) is a go-to clean-up tool and a favorite on job sites and in workshops. It seamlessly combines the convenience of cordless with the superior power-to-weight ratio of Makita's 18V LXT Lithium-Ion battery technology. The DUB182Z is the perfect addition to any kit, tool bag or work shop.

Feature:

• 179 MPH for Fast Clean-Ups
• Variable speed (0-18,000 RPM) for optimum speed control
• Up to 12 min. of continuous operation from a single charge
• Compact and ergonomic design at only 20-3/4" long
• Weighs only 3.9 lbs. with battery (battery not included)
• Rubberized soft grip handle for increased operator comfort

Landscapers and contractors are demanding more cordless alternatives to corded and gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18-Volt X2 LXT Lithium-Ion (36-Volt) Brushless Blower (model XBU02Z, tool only). With zero emissions, lower noise and considerably less maintenance, the 18-Volt X2 (36-Volt) Cordless Blower is a welcome solution for clean-up applications. It's powered by two 18-Volt LXT batteries for 36-Volt power and run time.

Feature:

• 2 18V LXT+ Li-Ion batteries deliver the power and run time
• Delivers up to 29 Minutes of Run Time on speed setting 3
• 6-Stage Air Velocity/Volume Selection Dial
• BL+ Brushless Motor Delivers up to 120 MPH air velocity

The 18V X2 LXT Chain Saw (model XCU02Z) is powered by two 18V LXT batteries (36V), so you get 36V power and run time for corded and gas-powered demands, without leaving the 18V LXT platform. Batteries and charger are sold separately.

Feature:

• Powered by Two 18V LXT+ Lithium-Ion Batteries
• 2 18V LXT+ Lithium-Ion batt. deliver power & performance
• 18V LXT+ platform (batteries not included)
• Low noise level at only 89 dB(A)
• Zero emissions for operator comfort
• 12" guide bar for increased capacity

Features:

• Heavy Gauge Steel Chassis.
• Wide 40" Working Width Dethatcher with 8" Transport Wheels.
• Individually Flexing Tine Tips; 3/16" Diameter with Triple Coil Strength.
• Adjustable Hitch for Various Rider Heights.
• No tool Assembly.
• Overall Dim: 49" L x 43" W x 12" H

Features:

• Heavy ¾" Tine Shaft.
• Weighty 12 Gauge Weight Tray.
• 14 Gauge Plugging Tines.
• 32 Plugging Tines - 4 Welded Tine Sections Rotate Independently on Turns.
• Wide 40" Working Width Plug Aerator.
• 3" Penetration Depth.
• Recommended Load Capacity - 175 Lbs. Maximum
• Single Steel Center Lift Lever Adjustable from the Tractor Seat.
• No tools required for assembly.
• Overall Dim: 49" L x 50" W x 33" H

Features:

• Wide 40" Working Width Spike Aerator with 8" Transport Wheels.
• 2" Penetration Depth.
• 14 Gauge Tine Blades.
• 156 Tine Tips - 12 Tips per Tine Blade, 13 - 8" Diameter Tine Blades.
• Heavy ¾" Shaft.
• Rugged 12 Gauge Weight Tray.
• Recommended Load Capacity - 100 lbs. Maximum.
• Overall Dim: 33" L x 48" W x 33" H

• Shipping Weight: .094
• Condition: New

Marathon Industries 18x8.50-8" Air Filled Power Equipment Tire

• Ribbed Tread
• 3.25" Centered Hub
• 1" Roller Bearing
• Mounted on a Single Piece Steel Rim
• 2-Ply Rubber Tire with Tube
• 500 lb. Load Capacity
• Not for Highway Use

1. Measure the outside tire diameter. To get the tire size, measure the outside diameter of the tire. Sometimes, the overall tire size is written along the sidewall of your tire. Though this won't provide you with information regarding your hub length and bearing size (those are separate measurements), it will help determine which tire size you need. Measuring the tire diameter of the tire will help to confirm that information.
2. Measure the hub length. The hub length is the measurement through the middle of the wheel (or hub) measuring from end point to end point (or bearing to bearing). You'll want to make sure to measure through the center of the wheel and not just the outside as there will be space in your rim that will go unaccounted for. You're trying to determine how much "space" the rim takes up on your axle. If you order a hub length that is too short, the tire will move from side to side on your axle. If you order a hub length that is too long, your rim will extend beyond your axle.
3. Measure the bearing size. The bearing is the metal piece on the end of your hub where your axle goes through. You just need to measure the inside diameter of the hole. To double check accuracy, you can also measure your axle diameter as well to be sure you have the correct size.

This Makita blower is two tools in one v it easily converts to a vacuum for reaching hard-to-get areas. It is compact and lightweight, weighing only 4.3 pounds. It has a maximum air velocity of 203 mph, and maximum air volume of 145 cfm for phenomenal power from such a compact tool. Its powerful Makita motor means efficient performance. A large, two fingered trigger switch ensures operator control and comfort. The ergonomic handle means comfortable operation in both horizontal and downward applications.

Feature:

• Compact and lightweight only 4.3 pounds
• Delivers a Maximum Air Speed of 203 MPH for Faster Job Site Clean Up
• Variable speed between 0 - 16,000 RPM
• Two tools in one; converts to a vacuum
• Includes dust bag & standard nozzle

• Shipping Rate Weight: 2.5
• Product Condition: New

• Shipping Rate Weight: 1.99
• Product Condition: New - Item is brand new, but may not have retail or original packaging.

Adjustable stilts with double safe locking system for strength and stability, Padded calf brace adjusts for comfort, Dual spring action provides a more natural walk, All aluminum parts are anodized for longer wear

Adjustable stilts with double safe locking system for strength and stability, Padded calf brace adjusts for comfort, Dual spring action provides a more natural walk, All aluminum parts are anodized for longer wear

Adjustable stilts with double safe locking system for strength and stability, Padded calf brace adjusts for comfort, Dual spring action provides a more natural walk, All aluminum parts are anodized for longer wear

Use this handy bar for loosening pavers for easier removal, Used to align pavers that have not been vibrated, Two handles and a foot rest for applying pressure and a tempered steel blade

Removes a single paver that has been in place for a long time, The adjustable jaws can be reset quickly and easily to accommodate most stone shapes and sizes, Serrated tempered steel blades, 11" maximum opening

Forged from special alloy steel, Perfectly tapered to drive carpet into the gully fast