CROW BAR - 24"
|
CROW BAR - 30"
|
CROW BAR - 36"
|
CROW BAR - 48"
|
CURVED EDGER - CARBON STEEL 6" x 3" x 3/8" RADIUS COMFORT GRIP HANDLE
6" long x 3" wide carbon steel edger
|
CURVED EDGER - CARBON STEEL 6" x 3" x 3/8" RADIUS WOOD HANDLE
6" long x 3" wide carbon steel edger
|
CUTTER JAWS ONLY 18" FOR 82-178
Used to cut rebar, mesh and non-ferrous metals
Replacement jaws available
|
CUTTER MATTOCK - 5 LB
Made from heat treated high carbon steel
Handle sold separately
153/4" long
31/2" blade width
Eye #6
|
CUTTER MATTOCK - 5 LB 15 3/4" 6 EYE
Made from heat treated high carbon steel
Handle sold separately
5 lb.
Blade length: 15 3/4"
Eye #6
|
DANGER TAPE - RED 1000' x 3"
Plastic tape has message continuously printed throughout roll
Use for roping off dangerous or restricted areas
2 mils thickness
|
DEAD BLOW PAVER SLEDGE - 5 1/2 LB
Steel canister and rod welded together for greater strength, durability andsafety
Weighted with steel shot
Covered with a hot cast polyurethane non-damaging molded shell
20" long
|
DEAD BLOW PAVER SLEDGE - 9 LB
Steel canister and rod welded together for greater strength, durability andsafety
Weighted with steel shot
Covered with a hot cast polyurethane non-damaging molded shell
30" long
|
DEEP & THIN GROOVER - SS 6" x 6" BIT 1" x 1/8" WOOD WAVE HANDLE
Slight 1/8" radius
Patent #: D775508
|
DEEP & THIN GROOVER - SS 6" x 6" BIT 2" x 1/8" COMFORT GRIP HANDLE
Slight 1/8" radius
Patent #: D775508
|
DEMOUNTABLE SHINGLE REMOVER - 28"
Serrated, heavy duty, tempered 9" blade made of chrome molybdenum steel
Reinforced skid plate
D style handle
Replacement blade available (#19-188)
|
DETAIL CHISEL - ALUMINUM 12"
Use these chisels for "touch-up"
The 24" & 36" sizes have two handles
|
DETAIL CHISEL - ALUMINUM 36"
Use these chisels for "touch-up"
The 24" & 36" sizes have two handles
|
DETAIL CHISEL - ALUMINUM 8"
Use these chisels for "touch-up"
The 24" & 36" sizes have two handles
|
DEWATER BAG - 10 OZ NON-WOVEN 15' X 15'
Non-woven 10 oz filter bags are designed to control and filter silt and sediment laden water
Constructed of non-woven geotextile material that filters soil particles greater than 150 microns (.150mm)
Adjustable spout to accommodate a discharge handle hose of up to 6"
The amount of discharge water a bag can effectively filter depends on factors such as the flow rate of pump, the amount and type of sediment, degree of slope, and the permeability of the underlying surface
Maximum initial pump rate: 1300 gpm
Capacity: 225 cu ft
|
DIAMOND BLADE 18"x.125"x1"-20mm DP
Premium blades with extra high .475" segments
Use dry or wet with high speed hand held saws, masonry table saws and walk behind saws
Designed as a premium, general all-purpose blade
Use to cut a variety of materials including brick, block and concrete pavers
1 DP
Arbor: 1" - 20mm
|
DIAMOND BLADE 20"x.125"x1" DP
Reliable performance and value
Specially designed "Mason Bond" for cutting Brick, Block & Pavers
Use with high speed hand held saws, masonry table saws and walk behind saws
Use dry or wet
1 DP
Arbor: 1" - 20mm
|
DIAMOND BLADE 20"x.140"x1" DP
Premium blades with extra high .475" segments
Use dry or wet with high speed hand held saws, masonry table saws and walk behind saws
Designed as a premium, general all-purpose blade
Use to cut a variety of materials including brick, block and concrete pavers
1 DP
Arbor: 1" - 20mm
|
DIRT TAMPER - 8" X 8" WITH BOLTED FIBERGLASS HANDLE
Comes with 48" handle
Cast iron head
Ships assembled
Replacement handle #22-809
|
DIY TILE CUTTER
This best selling tile cutter is the ideal choice for D-I-Y floor and wall projects
Equipped with long lasting 5/8" tungsten carbide cutting wheel
Built in measuring guide
Maximum tile size: 12"
Base size: 173/4" x 53/4"
|
DOLPHIN KNIFE™ COUNTERTOP DISPLAY
Show and sell more
|
DOUBLE FACE SLEDGE - 10 LB 34" FIBERGLASS HANDLE
Forged high carbon steel
#2 eye
|
DOUBLE FACE SLEDGE - 10 LB 36" WOOD HANDLE
Forged high carbon steel
#2 eye
|
DOUBLE FACE SLEDGE - 12 LB 34" FIBERGLASS HANDLE
Forged high carbon steel
#2 eye
|
DOUBLE FACE SLEDGE - 12 LB 36" WOOD HANDLE
Forged high carbon steel
#2 eye
|
DOUBLE FACE SLEDGE - 16 LB 34" FIBERGLASS HANDLE
Forged high carbon steel
#2 eye
|
DOUBLE FACE SLEDGE - 16 LB 36" WOOD HANDLE
Forged high carbon steel
#2 eye
|
DOUBLE FACE SLEDGE - 2 LB 16" FIBERGLASS HANDLE
Forged high carbon steel
#2 eye
|
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |