Shop by Brand: VDO Marine

Deep-Pipe Level Sender - 800mm - Stainless Steel - 240-33 OHM

Deep-Pipe Level Sensor is ideal for usage in fuel tanks. Its 38 mm diameter vertical tube contains a float inside, which measures a level of the liquid. Small holes at the top and bottom of the tube act as a baffle to fuel sloshing around in the fuel tank, so the float position remains stable at any sea state. Sensors are made in various lengths starting at 150 mm increasing to 1200 mm – please ensure that the length chosen is at least 4 mm from the base of the fuel tank once fitted. 

Features:

• TE Superseal Connector IP67
• Compensation chamber
• Flange: PA66 GF30
• Wiring harness with length of 200 mm
• 3 Signal ranges: 90–4 OHM, 0– 180 OHM, 240–33 OHM
• Lengh: 150 mm–1200 mm
• Mounting diameter: 54 mm
• IP67 protection rating

Double Glazed Lens - 100mm

Replacement lens for OceanLink 100 mm gauges.

Sold as a single.

Dual Station Rudder Angle Sensor 

Specifications -

• 12/24 Volt 
• 5-90 OHM
• 2 wire system

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Engine Oil Temperature Sensor - Single Pole, Common Ground - 50-150°C/120-300°F - 6/24V - M14 x 1.5 Thread

Features:

• Single Pole, Common Ground
• 50-150°C/120-300°F
• 6/24V
• M14 x 1.5 Thread

Engine Oil Temperature Sensor - Single Pole, Spade Connect - 50-150°C/120-300°F - 6/24V - M10 x 1.5 Thread

Features:

• Single Pole, Spade Connect
• 50-150°C/120-300°F
• 6/24V
• M10 x 1.5 Thread

Fresh Water Level Sensor with Sealing Kit #370 - 12-24V - 4-20mA - 80-600mm Length

Fresh Water Level Sensor (capacitive) with adjustable dip, sealing kit.

Fresh Water Level Sensor with Sealing Kit #930 - 12/24V - 4-20mA - 80-600mm Length

Fresh Water Level Sensor (capacitive) with adjustable dip, sealing kit N05-016-930.

Fuel Level Sensor Single Station with Seal Kit #432 - 12/24V - 3-180 OHM - 150-160mm Length

Fuel Level Sensor (resistive) with adjustable lever, sealing kit N05-801-432.

NavControl Bezel for AcquaLink® - White

Features:

• Color: White
• Specifically for AcquaLink®

Navigation Kit for Sail, Wind Sensor, Transducer, Display & Cables

Complex boats need a smart solution. And we have it. VDO Marine OceanLink® display is the only product on the market able to interpret CAN, NMEA 2000® and analog signals without any additional external device. 

Safety, performance, entertainment.  VDO Marine Navigation Kit and Navigation Kit Plus is the solution! Our Navigation Kits will become essential crew members which ensure you top performance in the open sea, even in the most extreme situations. 

All in one box All you need is in one box including wiring harness and terminators. All products are REACH and RoHS compliant and NMEA 2000® certified.

Navigation Kit Plus includes:

• 1x OceanLink 4.3 TFT Display/Gateway - Black
• 1x NMEA 2000 Wind Sensor
• 1x  NMEA 2000 Triducer Airmar Sensor (Speed/Depth/Water Temp)
• 1x 30m NMEA 2000 backbone (mast) cable
• 1x 6m NMEA 2000 drop cable
• 1x NMEA 2000 terminator (female)
• 1x NMEA 2000 terminator (inline)
• 2x NMEA 2000 T-splitter

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Navigation Kit Plus for Sailboats

Complex boats need a smart solution. And we have it. VDO Marine OceanLink® display is the only product on the market able to interpret CAN, NMEA 2000® and analog signals without any additional external device. 

Safety, performance, entertainment.  VDO Marine Navigation Kit and Navigation Kit Plus is the solution! Our Navigation Kits will become essential crew members which ensure you top performance in the open sea, even in the most extreme situations. 

All in one box All you need is in one box including wiring harness and terminators. All products are REACH and RoHS compliant and NMEA 2000® certified.

NAVSENSOR (INCLUDED ONLY IN THE KIT NAVIGATION PLUS)

The multifunctional AcquaLink™ NavSensor offers an inertial sensor with a GNSS receiver module to provide the accurate readings of speed of travel as well as pitch & roll. Compass readings can be displayed electronically thanks to the embedded Fluxgate compass, which also facilitate course corrections in electronic autopilots. The barometer and air temperature sensors are early indicators of forthcoming weather conditions.

Navigation Kit Plus includes:

• 1x OceanLink 4.3 TFT Display/Gateway - Black
• 1x NMEA 2000 Wind Sensor
• 1x Nav Sensor
• 1x  Triducer Airmar Sensor (Speed/Depth/Water Temp)
• 1x 30m NMEA 2000 backbone (mast) cable
• 3x 6m NMEA 2000 drop cable
• 1x NMEA 2000 terminator (female)
• 1x NMEA 2000 terminator (inline)
• 3x NMEA 2000 T-splitter

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

NMEA 2000® Inline T-Splitter for OceanLink® & AcquaLink® Gauges

NMEA 2000® - Inline T-Splitter

NMEA 2000® Wind Sensor - 9 to 16V

The wind vane turns in the direction of the wind and steers the wind direction gauge. The wind cups record the relative wind speed which in turn is displayed on the wind speed gauge.

Features:

• AcquaLink type wind sensor
• Output: NMEA-2000
• Measuring: Wind speed & direction
• Measuring system: Mechanical
• System: Hall-sensor & cross coils

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

OceanLink® 4.3" NMEA 2000® Certified TFT Gateway - Black

The new OceanLink® 4.3" multifunction TFT Display features a full 24 bit/16 m colors optically bonded display with transmissive layer technology for perfect readability even in direct sunlight. The TFT Display shows and distributes a wide array of data received from NMEA 2000® and J1939 CAN Bus systems and analog sensors directly connected to the display. Users can customize up to 40 different data pages with single, double, treble or quad grid layouts. 

TFT Displays can be daisy-chained with other OceanLink® gauges, displays or NavControls using the unique VDO Marine Bus or directly connected to the NMEA 2000® backbone (optional adapter cable required) for simple installation on any yacht. 

Features:

• Optical bonded mineral glass lens • Front & rear side protection rating IPX7 
• 1x NMEA 2000® connector 
• 1x J1939 
• 2x Analog input 
• 1x Frequency input 
• 2x 4–20 mA output 
• 1x EasyLink data output 
• 1x Programmable alarm output 500 mA 
• Operating temperature range -20°C/+70°C
• 12/24V

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

OceanLink® 52MM Bezel - Black

Features:

• Bezel for 52 MM OceanLink gauges
• Black in color
• Sold as a single

OceanLink® 7" NMEA 2000® Certified TFT Gateway - Black

The new OceanLink® 4.3" multifunction TFT Display features a full 24 bit/16 m colors optically bonded display with transmissive layer technology for perfect readability even in direct sunlight. The TFT Display shows and distributes a wide array of data received from NMEA 2000® and J1939 CAN Bus systems and analog sensors directly connected to the display. Users can customize up to 40 different data pages with single, double, treble or quad grid layouts. 

TFT Displays can be daisy-chained with other OceanLink® gauges, displays or NavControls using the unique VDO Marine Bus or directly connected to the NMEA 2000® backbone (optional adapter cable required) for simple installation on any yacht. 

Features:

• Touch screen function 
• Optical bonded mineral glass lens 
• Front & rear side protection rating IPX7 
• 1x NMEA 2000® connector 
• 2x J1939 
• 6x Analog input 
• 2x Frequency input 
• 2x 4–20 mA 
• 3x Digital input or 0–5 V 
• 2x Alarm output 
• 2x Video input 
• 2x EasyLink data output 
• 2x Programmable alarm output 500 mA 
• Operating temperature range -20°C/+70°C
• 12/24V

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

OceanLink® 85MM Bezel - Chrome

Features:

• Bezel for 85 MM OceanLink® gauges
• Chrome in color
• Sold as a single

OceanLink® Engine Oil Pressure - 10 Bar/150 PSI - White Dial & Bezel 

OceanLink® 52 mm Liquid Level Gauges are connected directly to any OceanLink® Master unit using the patented EasyLink serial bus connection. Gauges have anti-fog plastic double lens and choice of three various bezels.

Features:

• AMP Superseal Easylink
• 270° pointer deflection angle
• Reverse polarity protection
• Anti-fog mineral glass lens
• Front & rear protection rating IPX5
• Operating temperature range -20 °C / +70 °C
• 12/24V

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

OceanLink® Lens - 52mm

Replacement lens for OceanLink 52 mm gauges.

Sold as a Single.

OceanLink® Power & Data Cable - 85MM Master Gauges

Features:

• Power & Data Cable for 85 MM Master Gauges
• Sold as a single

Pressure Sender 10 Bar with M14 x 1.5 Thread 10 to 184OHM

Features:

• Ground: Standard
• Connection: Knurled Nut
• Voltage: 6-24V

Pyrometer Sensor Thermocoupler Element - 100-900°C/250-1650°F

Features:

• Pyrometer Sensor 
• Thermocoupler Element
• 100-900°C/250-1650°F

Pyrometer Sensor Threaded Bushing for Welding to Manifold for Thermocoupler Element

Features:

• Welding Flange for pyrometer thermokoppel
• Thread: R 1/4

Single Station Rudder Angle Sensor 

Specifications - 

• 12/24 Volt 
• 10-180 OHM
• 2 Wire system

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

0-5 Volt LinkUp Converter

Easily installed LinkUp gateway modules replace the original wiring, delivering power to both the LinkUp device and the sensor from the NMEA 2000 backbone while being still compliant with the NMEA 2000 certification.

Thanks to their passive wireless receiver, the configuration is done in a snap by using your mobile device and the LinkUp Configurator app available for Android and iOS devices. The parameters of the sensor are configured to type, instance, and warning threshold on the mobile device and then tapped against the LinkUp device for instant data download.

Before describing the different versions of LinkUp, we would like to highlight the fact that this device is a money saver compared to an over-designed NMEA 2000 converter. It reduces wiring, since the complete device – consists of 3 parts: a 30 cm wire pigtail with a standard M12 connector with 5 pins, the LinkUp device itself containing the device electronics, notification LED, wireless interface to program the device, and the NMEA 2000 side wiring, which is the output of all the LinkUp variants and finally a sensor-side cable – including the wires is approx. 50 cm long when unrolled.

The other benefits of this equipment are the contactless configuration with your smartphone, no need to spend money on an expensive HW, and no need for a power supply since the LinkUp is powered by NMEA.

Last but not least, thanks to its air-sealed housing, the device can be installed in the engine compartment according to ISO 8846:1990 (protection against ignition of surrounding flammable gases). As with all our products, LinkUp is CE, Reach, and RoHS compliant.

These powerful devices are fast, efficient, secure, safe, and cost-effective.

Features:

• Wireless configurable via a smartphone app
• Customizable sensor curves
• Approved for engine compartments acc. to ISO8846:1990
• Provides 5V-Source for passive sensors
• Alarms setup and transmission on NMEA 2000®
• Plug-and-Play installation
• NMEA 2000® certified

Technical Specifications:

• Operating voltage - 12V (from NMEA 2000®)
• Input signal range - 0-5V
• Protection class - IP X9/K
• Power consumption - ≤ 100mA
• Output current on 5V-source - 15mA
• Output signal - NMEA 2000®
• Dimensions - 125 mm x 32 mm (+cables)
• Operating temperature - -30°C to +80°C
• Flammability - UL94
• Housing material - PC-FR
• Compliance - CE, UKCA, Reach, RoHS, ISO8846:1990

In the Box:

• LinkUp Gateway – 0-5V 
• Veratron Card 
• Safety Manual

3-3/8" (85MM) ViewLine Tachometer with Multi-Function Display - 0 to 6000 RPM - Black Dial & Bezel

The ViewLine Tachometer is available with or without operating hours counter (digital display) and can be connected to conventional marine engines (no data bus). 

One LED warning light is integrated as a standard.

Specifications:

• Various sensor inputs (W, Ind, Hall, Generator)
• Output for acoustic alert (option)
• LCD size - 37 mm x 11 mm
• 8 and 14 pole Tyco / Hirschmann bush housing • Operating voltage 8 – 32 V
• Accuracy +/- 2.5 % of full scale reading
• < 175 mA current consumption with an LED warning  light as standard
• Number of pulses programmable via dip switch  or PC software (ViewLine programming tool)
•  Anti-fog double lens
•  Protection rating front IP67, rear IP52
•  85 mm installation diameter
•  50 mm installation depth 
• Operating temperature range -20 °C / +70 °C
• Reverse polarity protection

32-Pin Power Cable Single Engine Set-Up - .5M

32-pin power cable for single engine.

52 MM (2-1/16") AcquaLink Transmission Oil Pressure 30 Bar/440 PSI - Black Dial & Bezel

AcquaLink realizes state-of-the-art solutions to provide customers with instantaneous and accurate nautical information.  The instruments are designed for performance, with ease of use remaining an important attribute. The use of premium material - such as mineral glass lenses - guarantees the highest level of reliability and readability, as well as low energy consumption.

Features:

• Maximum precision and the deployment of pioneering technologies are equally important as ease of use and stylish design.
• AcquaLink components are made of high class materials, like mineral glass, stainless steel and aluminum.
• All products are manufactured below ISO 9001 certified environment.
• Our plug and play solution design concept offers a high level of installation flexibility.
• A cross-platform standard offers maximum freedom in respect of cockpit customization.
• We ensure seamless integration and optimum utilization of AcquaLink devices for extreme conditions at sea.
• Harmonized dashboard look.

Technical Specifications:

• Operating Range - +0 to +30 Bar /+0 to 400 PSI
• Input Signal -  EasyLink
• Nominal Voltage -12 / 24 V
• Color - Black/Aluminum 
• Installation Diameter - 52 mm (2-1/16")
• Installation Depth - 50 mm 
• Lens - Mineral Glass - Anti-fog
• IP Class - IPX6
• Connector Type - AMP Superseal IP65 3-Pole 

In the Box:

• Gauge
• Install/Safety Manual

*Sold as an Individual

52mm (2-1/16") IBM Kit - 12V

Whether on the water, in an RV, riding the trail, or operating a piece of industrial equipment, a dead battery will ruin anyone's day. Veratron's VL Flex Intelligent Battery Monitor Kit contains everything needed to deliver real-time battery health and status to the smallest dashboard. It combines two pioneering products, Veratron's award-winning Intelligent Battery Sensor and its revolutionary VL Flex Instrument. All additional components needed for a fast and easy installation are included.

The innovative Intelligent Battery Sensor measures and reports voltage, current, and temperature. It also originates additional critical data such as the state of charge and overall battery health. The device works for either a single 12V lead, gel, or AGM battery or a combination of two 12V batteries to a 24V unit.

Features:

• Flex display kit for Battery monitoring
• 1x Resistive input for Fuel or Fresh Water level
• Dedicated harness with pushbutton for screen scrolling

In the Box:

• VL Flex 52 IBM Gauge 12V 
• Intelligent Battery Sensor (IBS) 12 V
• Battery Pole Adapter M6
• Wire Harness 12V IBS 6m
• 52mm Mounting Spinlock
• Push Button for Wire Harness
• Safety instructions

*Sold as an Individual

52mm (2-1/16") IBM Kit - 24V

Whether on the water, in an RV, riding the trail, or operating a piece of industrial equipment, a dead battery will ruin anyone's day. Veratron's VL Flex Intelligent Battery Monitor Kit contains everything needed to deliver real-time battery health and status to the smallest dashboard. It combines two pioneering products, Veratron's award-winning Intelligent Battery Sensor and its revolutionary VL Flex Instrument.  All additional components needed for a fast and easy installation are included.

The innovative Intelligent Battery Sensor measures and reports voltage, current, and temperature. It also originates additional critical data such as the state of charge and overall battery health. The device works for either a single 12V lead, gel, or AGM battery or a combination of two 12V batteries to a 24V unit.

Features:

• Flex display kit for Battery monitoring
• 1x Resistive input for Fuel or Fresh Water level
• Dedicated harness with pushbutton for screen scrolling

In the Box:

• VL Flex 52 IBM Gauge 24V 
• Intelligent Battery Sensor (IBS) 24V
• Battery Pole Adapter M8
• Wire Harness 24V IBS 6m
• 52mm Mounting Spinlock
• Push Button for Wire Harness
• Safety instructions

*Sold as an Individual

52MM (2-1/16") OceanLink Coolant Temperature Gauge - 120°C/250°F - White Dial & Bezel

OceanLink 52 mm Vessel Status Gauges are connected directly to any OceanLink Master unit using the patented EasyLink serial bus connection.  Up to 16 EasyLink gauges for each Tachometer or GPS Speedometer can be daisy-chained together.  

Interchangeable bezel option. 

Features:

• AMP Superseal Easylink
• 270° pointer deflection angle
• Reverse polarity protection
• Anti-fog double lens
• Front & rear protection rating IPX5
• Operating temperature range -20 °C / +70 °C
• Nominal voltage - 12/24V
• Hole diameter - 52MM

In the Box:

• Gauge
• Bezel
• Rubber Seal
• Spinlock
• Installation Instructions
• Safety Instructions

*Sold as an Individual

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.