Aluminum Three Piece Boat Pole - 8' The marine grade aluminum tubing, Acme threaded end attachment and comfort grip handle make for a high quality and durable accessory. Its buoyant design keeps the boat pole afloat for more than 5 minutes. The bright orange rubber tip cover is highly visible and removes for accessory attachment. Fits all Sea-Dog® boat hook accessories. Dimensions:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
ATM Mini Blade Style Mixed Fuse Kit Tin Plated Zinc Alloy/Injection Molded Nylon. ATM Mini Blade Style Mixed Fuse Kit includes five each of 3A, 5A, 7.5A, 10A, 15A, and 20A fuses. Constructed of injection molded nylon with tin plated connector blades for superior conductivity and improved corrosion resistance. |
ATO Style Mixed Fuse Kit Tin Plated Zinc Alloy/Injection Molded Nylon. ATO Style Mixed Fuse Kit includes five each of 3A, 5A, 7.5A, 10A, 15A, and 20A fuses. Constructed of injection molded nylon with tin plated connector blades for superior conductivity and improved corrosion resistance. |
ATO/ATC Style Inline LED Fuse Holder - Up to 30A This Sea-Dog LED inline mini fuse holder is meant for ATO/ATC style fuses. Features:
Specifications:
|
Aurora Stainless Steel LED Pop-Up Table Light - 3W with Touch Dimmer Switch Aurora LED Pop-Up Table Light automatically switches on with a simple twist of the cap, allowing the light to pop-up, ready to use. Push the cap down, twist to lock, and the light switches off and disappears into the table or deck. Can be used with LED Touch Dimmer Switch (403061-1). Constructed of corrosion resistant investment cast 316 stainless steel cap and bezel. Installs with #10 FH fasteners (included). Produces 500 lumens. 12-24V. IP67 waterproof rating. Features:
LED Touch Dimmer Switch This LED Continuous Adjustment Dimmer without On/Off Function is designed to work with lights that are internally switched. Ideal for Aurora Pop-Up Light (404610-3). A center touch sensor activates the color-coded dimming levels. When off, the LED ring is orange; maximum bright, the ring is green; lowest light level, the ring is purple; and in between stages are shades of blue. Memory function turns the light back on at the same brightness level as when it was turned off. Constructed of corrosion resistant 304 stainless steel. 1.5A max. 12/24VDC. IP67 waterproof rating. Features:
|
Barrel Bolt - Chrome Finish - 1-1/2" Constructed of chrome plated extruded brass. These surface mounted Barrel Bolts provide additional security as either a primary or back-up locking system. Ideal for use on doors, gates, and cabinets. Appropriate for vertical, horizontal, left, or right-hand applications. In vertical use, notch in barrel holds bolt in locked position. Installs with six #6 FH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Barrel Bolt - Chrome Finish - 2" Constructed of chrome plated extruded brass. These surface mounted Barrel Bolts provide additional security as either a primary or back-up locking system. Ideal for use on doors, gates, and cabinets. Appropriate for vertical, horizontal, left, or right-hand applications. In vertical use, notch in barrel holds bolt in locked position. Installs with six #6 FH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Barrel Bolt - Chrome Finish - 2-1/2" Constructed of chrome plated extruded brass. These surface mounted Barrel Bolts provide additional security as either a primary or back-up locking system. Ideal for use on doors, gates, and cabinets. Appropriate for vertical, horizontal, left, or right-hand applications. In vertical use, notch in barrel holds bolt in locked position. Installs with six #6 FH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Barrel Bolt - Chrome Finish - 2-7/8" Constructed of durable chrome plated sand cast brass. These surface mounted Barrel Bolts provide additional security as either a primary or back-up locking system. Ideal for use on doors, gates, and cabinets. Appropriate for vertical, horizontal, left, or right-hand applications. In vertical use,, notch in barrel holds bolt in locked position. Installs with six #6 FH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Barrel Bolt - Chrome Finish - 3" Constructed of chrome plated extruded brass. These surface mounted Barrel Bolts provide additional security as either a primary or back-up locking system. Ideal for use on doors, gates, and cabinets. Appropriate for vertical, horizontal, left, or right-hand applications. In vertical use, notch in barrel holds bolt in locked position. Installs with six #6 FH fasteners (not included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Battery Box Strap & Brackets - 38" Battery Box Strap & Brackets includes a woven polypropylene strap, injection molded nylon buckle, two brackets, and four #8 FH fasteners. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Battery Box Strap & Brackets - 54" Battery Box Strap & Brackets includes a woven polypropylene strap, injection molded nylon buckle, two brackets, and four #8 FH fasteners. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Battery Terminal Covers - Red/Back - 1/2" These Battery Terminal Covers are designed to insulate integral marine wing nut terminals protecting battery cables from corrosion and shorting. Constructed of injection molded PVC. These covers satisfy USCG and ABYC requirements for the prevention of accidental grounding of battery terminals. Color coded to avoid polarity misidentification. Will fit most marine batteries as well as automotive batteries using add on marine terminals. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Battery Terminal Covers - Red/Black - 5/8" These Battery Terminal Covers are designed to insulate integral marine wing nut terminals protecting battery cables from corrosion and shorting. Constructed of injection molded PVC. These covers satisfy USCG and ABYC requirements for the prevention of accidental grounding of battery terminals. Color coded to avoid polarity misidentification. Will fit most marine batteries as well as automotive batteries using add on marine terminals. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Battery Terminal Wing Nut Style - Positive/Negative Set Wing Nut Style Battery Terminals convert battery posts to stud connectors and permit quick disconnection from the battery. Polarity specific to meet USCG regulations. Die cast lead construction. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Battery Tray with Clamp for 24 Series Batteries Heavy duty Battery Tray for size #24 batteries. Includes screw down clamp and four 1/4"x1" PH screws with washers. Injection molded polypropylene construction. |
Battery Tray with Clamp for 27 Series Batteries Heavy duty Battery Tray for size #27 batteries. Includes screw down clamp and four 1/4"x1" PH screws with washers. Injection molded polypropylene construction. |
Battery Tray with Straps for 24 Series Batteries Heavy duty Battery Tray with Strap for size #24 batteries. Includes hold down strap with a quick release buckle and four 1/4"x1" PH screws with washers. Injection molded polypropylene construction. |
Battery Tray with Straps for 27 Series Batteries Heavy duty Battery Tray with Strap for size #27 batteries. Includes hold down strap with a quick release buckle and four 1/4"x1" PH screws with washers. Injection molded polypropylene construction. |
Bean Bag Style Ashtray - Red Bean Bag Style Ashtray is ideal for any boat, auto, or RV. Features a corrosion resistant stamped 304 stainless steel wind proof cover with a stable, non-sliding bean bag base. 4-1/8" in diameter. |
Black LED Comination Bow Light - Injection Molded ABS - 2nm Black LED Combination Bow Light (400058) is approved for USCG 1 NM (Colreg 1 mile) and is constructed of injection molded ABS with a Zamak base. Installs with two #8 RH fasteners (not included). IP67 waterproof rating. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Black LED Navigation Lights - Port & Starboard LED Side Mount Navigation Lights are approved for USCG 2 NM (Colreg 2 mile). One pair includes port and starboard lights. 400072 is constructed of injection molded ABS. Installs with two #8 FH fasteners (not included). All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Black Side Mount LED Navigation Lights - 1 NM - Port & Starboard LED Side Mount Lights 400078 are approved for USCG 1 NM (Colreg 1 mile). Constructed of injection molded ABS. One pair includes port and starboard lights. Surface mounts vertically with two #8 FH fasteners (not included). 12VDC. Low amp draw. All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Blade Style LED Indicator Fuse Block with Negative Bus Bar - 12 Circuit Nickel Plated Copper/Stainless Steel/Injection Molded ABS. Features:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Blade Style LED Indicator Fuse Block with Negative Bus Bar - 6 Circuit Nickel Plated Copper/Stainless Steel/Injection Molded ABS. Features:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Boat Hook Combination Soft Bristle Brush & Squeegee The Combination Soft Bristle Brush & Squeegee fits all Sea-Dog® Boat Hooks and universal/Acme threaded devices. Soft bristles are scratch resistant for gelcoat, paint, and plastic windows. Constructed of injection molded nylon with a marine grade silicone rubber squeegee. |
Boat Hook Microfiber Mop Soft micro fiber straps provide gentle and effective cleaning action. The fast-drying micro fiber is highly absorbent and scratch resistant while also preventing water spots. Fits all Sea-Dog® boat hooks and all universal threaded devices. Universal/Acme Thread WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Boat Hook Mooring Cover Support Crown Constructed of UV resistant injection molded nylon this crown fits the tip of an adjustable boat hook, or any universal threaded device, to support a mooring cover or canvas top. The unique configuration has strap or line attachment details designed to secure the support crown in the correct location eliminating problems caused by water pooling from rain, sleet or snow. Combine any Sea-Dog® Boat Hook with the Support Crown 491110-1 and mooring cover support crown straps 491115-1 for the perfect solution to nature's pooling pressures. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Boat Hook Mooring Cover Support Crown Webbing Straps Three nylon webbing straps used for positioning the mooring cover support crown securely in place. Each strap is 15’ in length, with a securing loop on one end and an adjustable snap clip on the other they are designed for setting once and then clipping in and out later for ease of use. Each set includes 3 straps. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Boat Hook Mooring Cover Support Plate Crown & Webbing Straps Combine a Sea-Dog Boat Hook with the Support Crown and mooring cover support crown straps (#491115-1) for the perfect solution to nature's pooling pressures. Boat Hook Mooring Cover Support Plate Crown Features:
Webbing Straps These Mooring Cover Support Crown Webbing Straps are used for positioning the Mooring Cover Support Crown (491110-1) securely in place. Includes three 15' straps, with a securing loop on one end and an adjustable snap clip on the other. They are designed to set once and then simply clip in and out later for ease of use. |
Boat Hook Silicone Squeegee Heavy duty silicone blade provides a wide (12”) coverage area to easily clean and clear any type of window or marine surface. Comfort grip allows for manual use or attach to any Sea-Dog® boat hook and all universal threaded devices. Universal/Acme Thread WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Boat Hook Three Sided Bristle Brush - Medium Bristle These three-sided bristle brushes fit all Sea-Dog® boat hooks and all universal threaded devices. The medium bristle is a good overall brush for textured and non-skid surfaces. Side bristles make it easy to clean in hard to reach places. 10-1/2” head is longer than industry standard covering a larger cleaning area. Universal/Acme Thread WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |