Shop by Brand: Sea-Dog

Quarter-Turn Textured Deck Plate with Internal Collar - Black - 6" 

The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.

Quarter-Turn Textured Deck Plate with Internal Collar - Black - 8" 

The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.

Quarter-Turn Textured Deck Plate with Internal Collar - White - 5" 

The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.

Quarter-Turn Textured Deck Plate with Internal Collar - White - 6" 

The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.

Quarter-Turn Textured Deck Plate with Internal Collar - White - 8" 

The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents.

Rail Base Fitting 2-3/4" Round Base 30° 316 Stainless Steel - 1" OD

These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with three FH fasteners (not included). 

*Stainless tubing with a wall thickness of 0.049”

Rail Base Fitting 2-3/4" Round Base 45° 316 Stainless Steel - 1" OD

These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with three FH fasteners (not included). 

*Stainless tubing with a wall thickness of 0.049”

Rail Base Fitting 2-3/4" Round Base 60° 316 Stainless Steel - 1" OD

These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with three FH fasteners (not included). 

*Stainless tubing with a wall thickness of 0.049”

Rail Base Fitting 2-3/4" Round Base 90° 316 Stainless Steel - 1" OD

These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with three FH fasteners (not included). 

*Stainless tubing with a wall thickness of 0.049”

Rail Base Fitting Rectangular Base 30° 316 Stainless Steel - 1-7/8" x 32-3/16" - 1" OD

These Rectangular Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with four FH fasteners (not included). *Stainless tubing with a wall thickness of 0.049”.

Features:

• Investment Cast 316 Stainless Steel 
• 30° Rectangular Base
• 1" Tube OD
• Base: 1-7/8" x 3-3/16"
• Fastener: 1/4" FH

Rail Base Fitting Rectangular Base 30° 316 Stainless Steel 1-7/8" x 3-3/16" - 1" OD

These Rectangular Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with four FH fasteners (not included). 

*Stainless tubing with a wall thickness of 0.049”

Rail Base Fitting Rectangular Base 45° 316 Stainless Steel - 3-1/4" x 1-7/8" - 1" OD

These Rectangular Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with four FH fasteners (not included). 

*Stainless tubing with a wall thickness of 0.049”

Rail Base Fitting Rectangular Base 60° 316 Stainless Steel - 1-7/8" x 3-1/4" - 1" OD

These Rectangular Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with four FH fasteners (not included). 

*Stainless tubing with a wall thickness of 0.049”

Rail Base Fitting Rectangular Base 90° - 316 Stainless Steel - 1-11/16" x 3" - 7/8" O.D.

Replacement rail base fitting.  

Features:

• Constructed of corrosion resistant investment cast 316 stainless steel. 
• Stainless tubing with a wall thickness of 0.049”
• Installs with four FH fasteners (not included). 

∗Sold as an individual 

Rail Base Fitting Rectangular Base 90° 316 Stainless Steel - 1-7/8" x 3-3/16" - 1" OD

Replacement rail base fitting.  

Features:

• Constructed of corrosion resistant investment cast 316 stainless steel. 
• Stainless tubing with a wall thickness of 0.049”
• Installs with four FH fasteners (not included). 

∗Sold as an individual 

Rail Mount Adjustable Rod Holder Fits Diameter 1-11/16" - Formed & Cast 316 Stainless Steel

This Rail Mount Rod Holder can accommodate rods up to 1-11/16” in diameter. Features a front mount adjustment screw, allowing easy adjustment without having to disassemble the rail mount brackets. Designed to fit 7/8” to 1” diameter tubing. A leash on the rod and/or reel is recommended when using rail mount rod holders. Constructed of corrosion resistant formed and cast 316 stainless steel with black plastic end cap.

Rail Mount Bracket for Flagpole - Round - 7/8"-1"

Round Rail Mount Bracket is for use on 7/8" and 1" tubing. Constructed of corrosion resistant UV stabilized injection molded nylon. Installs with two RH fasteners and nuts (included). Accommodates Sea-Dog® Round Flagpoles (328112-1 and 328114-1). Maximum speed 10 MPH.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Rail Mount Horseshoe Buoy Bracket 

The Sea-Dog® Rail Mount Horseshoe Buoy Bracket can be used on 7/8" or 1" tubing or mounted directly to a flat surface. Comes complete with all necessary hardware. Made from marine grade stamped aluminum and powder coated for a long-lasting finish.

Rail Mount Ring Buoy Bracket 

The Sea-Dog® Rail Mount Ring Buoy Bracket can be used on 7/8" or 1" tubing or mounted directly to a flat surface. Comes complete with all necessary hardware. Made from marine grade stamped aluminum and powder coated for a long-lasting finish.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Rail Mount Stainless Steel Fender Holder Dual - 11"

The Rail Mount Dual Fender Holder is for use on 7/8" or 1" tubing. Easy to mount, these fender holders adjust to any angle of railing and can hold any style fender. Folds flat for easy storage when not in use. Constructed of corrosion resistant formed 304 stainless steel.

Rail Mount Stainless Steel Fender Holder Dual - 7.5"

The Rail Mount Dual Fender Holder is for use on 7/8" or 1" tubing. Easy to mount, these fender holders adjust to any angle of railing and can hold any style fender. Folds flat for easy storage when not in use. Constructed of corrosion resistant formed 304 stainless steel.

Rail Mount Stainless Steel Fender Holder Dual - 9"

The Rail Mount Dual Fender Holder is for use on 7/8" or 1" tubing. Easy to mount, these fender holders adjust to any angle of railing and can hold any style fender. Folds flat for easy storage when not in use. Constructed of corrosion resistant formed 304 stainless steel.

Rectangular Motor Flush

Molded PVC/Painted Steel

Outboard Rectangular Motor Flush quickly flushes away salt, sand, minerals, and contaminates from your lower unit cooling system, extending the engine’s service life. Easy-to-use molded PVC cups deliver fresh water to flush the cooling system through side intakes on the lower unit. Simple garden hose connection, no tools required. Great for winterizing, tune-ups, and other maintenance that requires running an outboard engine out of the water. Features rectangular cups for use with larger outboards.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Remote Wireless Horn Button - Steering Wheel Hub Mount

This horn button works with a simple push. Essentially, the remote wireless momentary push-button horn switch is activated by pushing the button transmitter to send a signal to the receiver, which activates the existing horn. 

Features:

• The receiver connects to the existing horn switch wiring for easy installation
• The receiver works up to 50 ft. away from the horn button
• The transmitter button uses a CR2032 battery (included) and is installed to wheel center cap either by double-back tape or two #8 fasteners (included)

Specifications:

• Horn Button Diameter: 2-15/16 in.
• Horn Button Depth: 7/8 in.
• Transmitter Width: 2-1/4 in.
• Transmitter Length: 1-1/4 in.
• Maximum: 20A. 12VDC.
• Volts: 12
• Amps: 20

Removable All Around Light - Injection Molded Nylon/Aluminum

This Removable 360° All Around Light is for replacement of existing lighting (not for new construction). Includes a removable pole for storage. Constructed of injection molded nylon and aluminum with a white translucent lens. Installs with three #8 FH fasteners (not included). 12 VDC. These navigation lights do not meet the USCG 33 CFR 183.810/ABYC standard A-16 from 2016, but do meet the USCG 33 CFR/ABYC A-16 from 1997.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Replacement Short Bow Roller - Natural Rubber/Brass Insert

This Short Bow Roller makes dropping and weighing anchor a breeze. Easy to use, it reduces the risk of damage to the hull or deck. The rubber wheel accommodates rope up to 1" in diameter. Constructed of natural rubber and feature a brass insert for added strength.

Replacement Wall Catch - Chrome  

This wall catch is intended to be a replacement part for Sea-Dog's Door Stop and Catch.

Features:

• Chrome plate finish

Rigging Knife - 304 Stainless Steel

This handy Rigging Knife includes a sharp blade, Marlin spike, shackle key, screw driver, bottle opener, and a loop to attach a lanyard (not included). Constructed of corrosion resistant 304 stainless steel. A great addition to any tool box.

Rod Holder Gimbal Mount Fillet Table - 20" 

Features:

• Solid one-piece construction for long life and easy maintenance
• Easily adjustable, multi-position gimbaled rod holder mounting system folds flat for easy storage
• UV stabilized high-density polypropylene construction
• Medium, 20" wide by 12-5/8" deep,
• UV stabilized, high-density polypropylene
• Assembles in minutes, with all assembly hardware included
• Easily accessible knife and pliers holders
• Knives and pliers not included

Rod Holder Gimbal Mount Fillet Table - 30" 

Features:

• Solid one-piece construction for long life and easy maintenance
• Easily adjustable, multi-position gimbaled rod holder mounting system folds flat for easy storage
• UV stabilized high-density polypropylene construction
• Large, 30" by 12-5/8" deep with towel bar.
• UV stabilized, high-density polypropylene
• Assembles in minutes, with all assembly hardware included
• Easily accessible knife and pliers holders, large has hose holder and towel bar
• Knives and pliers not included

Rod Storage Rack - 5 Rod 

Constructed of injection molded polypropylene. These Rod Storage Racks feature soft foam inserts securing rods and reducing potential damage from rough seas. Installs with four #8 FH fasteners (not included).