Oil Change Pump with Battery Clips - 12V This portable, lightweight Premium Electric Oil Pump is easy to use and transport. The self-priming 12V pump attaches to battery terminals with alligator clips and drains oil through the dipstick tube on outboards and sterndrives. Convenient DIY operation saves money on expensive oil changes. Its compact size makes it is easy to store. Includes 48” inlet and 80” outlet hoses. 12VDC. 60W. Maximum run time: 30 minutes. NOT intended for commercial use. NOT suitable for pumping out transmission oil, water, or flammable liquids. Features:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
OLED Voltmeter - Round The OLED (Organic LED) Voltmeter is designed to withstand constant vibration and the rigors of a marine environment. Monitors voltage on a bright, waterproof, daylight readable OLED screen. High contrast and resolution make this screen visible from a wide viewing angle, even with polarized sunglasses. Reverse polarity protected. Constructed of injection molded nylon with terminal spade contacts. Installation is as easy as drilling a 1-1/8" hole, inserting the socket body, tightening the locking nut, and connecting the wires. Also fits Sea-Dog® Power Socket Shell (426100) and Mounting Bracket (426105). Input 8-60VDC. IP66 rating. |
Optional Bluetooth Smart Phone Controller - RGB Using Bluetooth technology, this RGB LED controller lets you operate LED RGB Rod holders (325181), LED RGB Tube inserts (325189), LED RGB Rod holder caps (325188), and LED RGB strips lights with your smartphone (IOS 6 or Android 4.0 and above). Choose from numerous dynamic color-changing modes with adjustable speed and brightness levels or from static color modes. Additional features include a color-selection wheel, 6 timer settings, music control, mode/color-change via phone shake, and photo color match (matches specific colors in photos). This LED controller has a maximum load capacity of 10 amps per channel and is compatible with LED light strips that operate within a 5-24 VDC range. The maximum load is 400 watts at 12 volts or 800 watts at 24 volts. The controller works within 50' of your phone. For dry locations only. CE, RoHS compliant. Features:
|
Oval Surface Mount USB 3.0 & USB-C Power Socket This oval surface-mount USB 3.0 & USB-C power socket charges two devices simultaneously. When split, the total 6A output is 3A per side. USB 3.0 features quick charging (QC) for supported devices, giving enough power to charge phones, pads, and tablets quickly and efficiently. Features:
Specifications:
|
Plastic Boat Hook Hull Scraper Boat Hook Hull Scraper can be attached to any Sea-Dog® Boat Hook/Boat Pole or universal/Acme threaded device. Great for waterline cleaning from inside the vessel and scraping ice from windshields. Specifications:
|
Plastic Motion Sensor Switch with Delay for LED Lights Motion Sensor Switch can be used to activate LED and incandescent lights. The motion detection range is up to 15 feet, with an activation angle of 120°. Activation time is adjustable (10/20/50/70 seconds); factory preset 70 seconds. 2A max. 12-30VDC. IP67 waterproof rating. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Plastic Suction Cup Handle Injection Molded Nylon/Nitrile-Buna Rubber Portable, dual suction cup handle installs instantly. Mounts in any direction on any non-porous surface. Easily mount and re-mount with no marks or damage to hull. No holes, screws, or tools required. Ideal for cleaning waterlines or boat bottoms while swimming or from a dinghy. Attach to your paddleboard or kayak for an extra handle during transport. For use above or below the waterline. Constructed of non-corrosive injection molded nylon and Nitrile-Buna rubber. Designed to assist grip not to leverage full body weight. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Plugmate™ Garboard Wrench The Garboard wrench features multiple deck keys. Constructed of durable injection molded polypropylene it fits standard garboard plugs as well as "T" style plugs. The 520045-1 includes one replacement plug stored in handle. |
Poly Pro Anchor Line with Snap - 1/4" x 100' - Yellow Hollow Braid Anchor Line with Snap. Features:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Poly Pro Anchor Line with Snap - 1/4" x 50' - Yellow Hollow Braid Anchor Line with Snap. Features:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Poly Pro Anchor Line with Snap - 3/8" x 100' - Yellow Hollow Braid Anchor Line with Snap. Features:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Poly Pro Anchor Line with Snap - 3/8" x 75' - Yellow Hollow Braid Anchor Line with Snap. Features:
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Poly Rail Mount Motor Bracket - Black Injection Molded Polypropylene These Rail Mount Motor Brackets are designed to hold small, 2-cycle outboards up to 8 HP upright on the stern rail. Will fit both 7/8" and 1" rails, as well as rails using 90° tee fittings. Most other polypropylene and wood motor brackets only fit 1" welded rails. The two-piece unit features extra holes, enabling the use of a recommended chain to secure the motor. Can also be used as a mounting platform for barbecues, down rigger brackets, fish cleaning tables, etc. Constructed of UV stabilized polypropylene. Includes all necessary fasteners. |
Poly Rail Mount Motor Bracket - White Injection Molded Polypropylene These Rail Mount Motor Brackets are designed to hold small, 2-cycle outboards up to 8 HP upright on the stern rail. Will fit both 7/8" and 1" rails, as well as rails using 90° tee fittings. Most other polypropylene and wood motor brackets only fit 1" welded rails. The two-piece unit features extra holes, enabling the use of a recommended chain to secure the motor. Can also be used as a mounting platform for barbecues, down rigger brackets, fish cleaning tables, etc. Constructed of UV stabilized polypropylene. Includes all necessary fasteners. |
Pontoon Boat Mini Compact Horn with Bracket Pontoon Boat Mini Compact Horn with Bracket is constructed of powder coated steel. Includes 304 stainless steel bracket for easy mounting. Recommended for fresh water applications. At 111 decibels and a frequency (Hz) of 370±20A, this horn meets US Coast Guard's COLREGS and ABYC standard A-23 for use on vessels under 12m (39'). 12VDC. NMMA Type Accepted #2601746. |
Pop-Out Textured Deck Plate - White - 6" The Sea-Dog® Pop-Out Deck Plate is constructed of UV stabilized molded ABS and polycarbonate for its structural strength, as well as weather and corrosion resistance. The integrated, pop-up lever makes opening and closing a snap; no tools required. Rubber O-ring provides a watertight fit. Patent Pending. Avoid contact with acetone or strong solvents. |
Pop-Out Textured Deck Plate - White - 8" The Sea-Dog® Pop-Out Deck Plate is constructed of UV stabilized molded ABS and polycarbonate for its structural strength, as well as weather and corrosion resistance. The integrated, pop-up lever makes opening and closing a snap; no tools required. Rubber O-ring provides a watertight fit. Patent Pending. Avoid contact with acetone or strong solvents. |
Power Box Battery Switch The Power Box is controlled with a 50A battery switch and monitored with an LED voltmeter. The switch features a removable knob for extra security. The power box includes two power sockets, two Anderson outputs, one USB-C port, and four USB-A ports. Features:
Specifications:
|
Power Socket Rear Boot This power socket rear boot protects wire connections and provides a finished appearance. Fits all Sea-Dog® round power sockets, gauges, and meters. Features:
Specifications:
|
Push Button Cabinet Latch - Oval These corrosion resistant 316 stainless steel Cabinet Latches function as both a latch and handle. Push button operation activates and secures the latch with a simple, deliberate motion. Positive action locking function prevents cabinets from opening while in motion. Easy to install by boring a single 3/4” hole. Suitable for left or right-hand side uses. Sleek, low-profile design makes them convenient in tight spaces. Great for glove compartments. Includes catch. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Push Button Cabinet Latch - Rectangular These corrosion resistant 316 stainless steel Cabinet Latches function as both a latch and handle. Push button operation activates and secures the latch with a simple, deliberate motion. Positive action locking function prevents cabinets from opening while in motion. Easy to install by boring a single 3/4” hole. Suitable for left or right-hand side uses. Sleek, low-profile design makes them convenient in tight spaces. Great for glove compartments. Includes catch. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Push Button Rim Latch - Polished Chrome Display parts come complete with both strike plates. Hole spacing on flat strike plate (224320) is 1-7/8". Hole spacing on 90° strike plate (224321) is 1-3/16". Both require a #4 FH fastener. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
PVC Coated Grab Handle - Black - 9-3/4" Soft Grip Handle with concealed fasteners. Constructed of injection molded nylon with PVC coating. Installs with two #10 FH fasteners (included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
PVC Coated Grab Handle - White - 9-3/4" Soft Grip Handle with concealed fasteners. Constructed of injection molded nylon with PVC coating. Installs with two #10 FH fasteners (included). WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. |
Quarter-Turn Smooth Deck Plate with Internal Collar - Black - 4" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents. |
Quarter-Turn Smooth Deck Plate with Internal Collar - Black - 5" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents. |
Quarter-Turn Smooth Deck Plate with Internal Collar - Black - 6" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents. |
Quarter-Turn Smooth Deck Plate with Internal Collar - Black - 8" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents. |
Quarter-Turn Smooth Deck Plate with Internal Collar - White - 4" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents. |
Quarter-Turn Smooth Deck Plate with Internal Collar - White - 5" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents. |
Quarter-Turn Smooth Deck Plate with Internal Collar - White - 6" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents. |
Quarter-Turn Smooth Deck Plate with Internal Collar - White - 8" The Sea-Dog® Quarter-Turn Deck Plate is constructed of UV stabilized ABS. Features a new locking system that prevents over tightening, jamming, and cross threading. These deck plates also feature an internal, molded-in collar on the bottom to hold deck plate bags or other round containers. When installing, use silicone sealant on hull or deck surface. Keep threads clean with hot, soapy water. Lubricate with Vaseline or Teflon grease. Installs with six #8 FH fasteners (not included). Avoid contact with acetone or strong solvents. |
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |