Shop by Brand: Scanstrut

Satcom Plate 1 Designed for Satcoms Up to 30cm (12")

The Modular Dual PowerTower has been designed to allow your open array, radar, Satcom & camera to be mounted together in one single space-saving modular installation.

Features:

• Designed for Satcoms Up to 30cm (12")
• Satcom Plate 1

Satcom Plate 2 Designed for Satcoms Up to 45cm (17")

The Modular Dual PowerTower has been designed to allow your open array, radar, Satcom & camera to be mounted together in one single space-saving modular installation.

Features:

• Designed for Satcoms Up to 45cm (17")
• Satcom Plate 2

Satcom Plate 3 Designed for Satcoms Up to 60cm (24")

The Modular Dual PowerTower has been designed to allow your open array, radar, Satcom & camera to be mounted together in one single space-saving modular installation.

Features:

• Designed for Satcoms Up to 60cm (24")
• Satcom Plate 3

• Fits all PowerTower models and all SC100 Poles and SC2 poles
  
• Suitable for all 12", 18" and 24" radomes
  
• All mounting holes pre-drilled for easy retrofit installation
  
• All cables run internally
  
• Port mounted light bar fits all Perko series 0455, 0466, and Aqua signal series 25 & 40 all round white lights
  

• SC111 Starboard mounted GPS / VHF / Navtex bar
  
• Fits all PowerTower models and all SC100 Poles and SC2 poles
  
• Suitable for all 12", 18" and 24" radomes
  
• All mounting holes pre-drilled for easy retrofit installation
  
• All cables run internally
  
• GPS / VHF / Navtex bars are available in both port and starboard mounted options allowing up to two additional antennas to be mounted above the main radar
  
• Port mounted light bar fits all Perko series 200 and Aqua signal series 25 & 40 all round white lights
  
• GPS / VHF / Navtex bar fits standard 14TPI 1" GPS mounts

PowerTower® Port Mounted Bar f/GPS, VHF & Navtex

Mounts light, GPS, VHF and Navtex antennas above the radar, clear of all obstructions for maximum performance and visibility.

Features

• SC112 Port mounted GPS / VHF / Navtex bar
• Fits all PowerTower models and all SC100 Poles and SC2 poles
• Suitable for all 12", 18" and 24" radomes
• All mounting holes pre-drilled for easy retrofit installation
• All cables run internally
• GPS / VHF / Navtex bars are available in both port and starboard mounted options allowing up to two additional antennas to be mounted above the main radar
• GPS / VHF / Navtex bar fits standard 14TPI 1" GPS mounts

• Easy and quick to install with all fastenings supplied
  
• Attached to mast by four swivel feet matching the profile of any mast
  
• 12 point fixing using highest quality Monel rivets for a secure installation
  
• Nylon washers for all fastenings to protect paint finish
  
• Waterproof cable grommet included to seal cable entry into mast

• Marine grade 6082 aluminium
  
• Polyester powder coated for a durable and gloss white finish

• 1 x Mast Mount
  
• 4 x Swivel mounting feet
  
• 1 x Complete fastening pack

• Garmin GMR18/GMR18HD
  
• Simrad DX45
  
• Intellian i3
  
• KVH TracVision M2/M3
  
• Raymarine 37STV
  
• Sea Tel Coastal 14

• Easy and quick to install with all fastenings supplied
  
• Attached to mast by four swivel feet matching the profile of any mast
  
• 12 point fixing using highest quality Monel rivets for a secure installation
  
• Nylon washers for all fastenings to protect paint finish
  
• Waterproof cable grommet included to seal cable entry into mast

• Marine grade 6082 aluminum
  
• Polyester powder coated for a durable and gloss white finish

• 1 x Mast Mount
  
• 4 x Swivel mounting feet
  
• 1 x Complete fastening pack

• Mounting using radome bolts, no extra fastenings required
  
• Easy to fit - between mast mount and radar antenna
  
• Manufactured from marine grade 316 stainless steel

• SC20
  
• M92722

SC29 Radar Guard for M92722 for Use In Combination with Raymarine Quantum Radar

Polished stainless steel guards protect radome from damage and reduce wear on the sails.

Features:

• Mounted using radome bolts, no extra fastenings required
• Easy to fit – between mast mount and radar antenna
• Manufactured from marine grade 316 stainless steel

• Premium quality, high strength and corrosion free composite molding
  
• Satcom mount fixings hidden internally
  
• Antenna fixings external for ease of antenna installation and maintenance
  
• Watertight installation - includes factory fitted watertight seal & gland systems

• Monocoque composite GRP molding
  
• Polyester powder coated for a durable and gloss white finish

Scanpod Instrument Pod - Uncut - Arm Mounted - Fits 1" - 1.3" Rails

Current sailboat designs often have very open cockpits with few options for installing retro-fit instruments.

Options available to install a 7" display or standard instrument.

Arm Mounted:

• Extend the Rail Pod away from narrow or crowded rails for better viewing
• Designed to ensure the Pod is always positioned for best viewing, whatever the angle of the rail

Scanpod Deck Pod Uncut for 10" to 12" Displays

Solve the challenge of finding a level mounting surface to install your displays onto your powerboat, RIB or sailboat wheelhouse.

For Displays and Standard Instruments:

• Fits 10" to 12" Displays
• Usable face 14.7H x 9.7W
• Accomodates 3/4 Standard instruments (e.g. ST60)

Features:

SWIVEL & TILT BASE

One handed quick release action. Simply release the lever, swivel and tilt to suit your requirements before locking back into position.

BEST VIEWING ANGLE

An adjustable ball joint allows range of movement and multiple mounting angles.

ADDED STRENGTH

Inner bracing plate secures the Deck Pod base to the pod and gives increased rigidity to the assembly eliminating potential damaged from shock and vibration.

OVERHEAD MOUNTING

Deck Pod models can be overhead mounted. Refer to part number guide for compatibility.

HASSLE FREE INSTALL & SERVICE

Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing.

INCREASED PROTECTION

Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won’t deteriorate over time.

SUPPLIED UNCUT

As standard you will receive your Scanpod uncut (for tips on cutting, please view the FAQ tab). For larger orders, a factory cutting service is available.

Scanpod Deck Pod Uncut for 9" Displays

Solve the challenge of finding a level mounting surface to install your displays onto your powerboat, RIB or sailboat wheelhouse.

For Displays and Standard Instruments:

• Fits displays up to 9”
• Usable face 13.2H x 8.14W
• Accomodates 3/4 Standard instruments (e.g. ST60)

Features:

SWIVEL & TILT BASE

One handed quick release action. Simply release the lever, swivel and tilt to suit your requirements before locking back into position.

BEST VIEWING ANGLE

An adjustable ball joint allows range of movement and multiple mounting angles.

ADDED STRENGTH

Inner bracing plate secures the Deck Pod base to the pod and gives increased rigidity to the assembly eliminating potential damaged from shock and vibration.

OVERHEAD MOUNTING

Deck Pod models can be overhead mounted. Refer to part number guide for compatibility.

HASSLE FREE INSTALL & SERVICE

Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing.

INCREASED PROTECTION

Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won’t deteriorate over time.

SUPPLIED UNCUT

As standard you will receive your Scanpod uncut (for tips on cutting, please view the FAQ tab). For larger orders, a factory cutting service is available.

Scanpod Helm Pod 3 Instrument Uncut - White

With great features, the Helm Pod is a perfect choice for all cockpit configurations. With options to fit radar displays, chartplotters and standard navigation instruments, the Helm Pod is the right choice for you.

For Displays & Standard Instruments:

• 3 x standard navigation instruments & autopilots
• Usable face 15.35H x 5.5W

Features:

• Universal Helm Fixing - Fits pedestal rails from 25mm to 33.7mm (0.98" - 1.33"). Using a unique clamping system, the Pod can fit rail widths from 178mm (7") upwards.
• Secure & Watertight Install - Saddle system supports the stainless tubing enabling a secure and rigid fit onto any pedestal and also ensures a watertight seal at cable entry
• No Drill Fixing Kit - Customised U-bolts fit around rail and through the saddles into the back of the pod eliminating the need for time consuming and awkward drilling of the stainless rail.
• Hassle Free Install & Service - Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing.
• Increased Protection - Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won't deteriorate over time.
• Supplied Uncut - As standard you will receive your Scanpod uncut. For larger orders, a factory cutting service is available.

Scanpod Helm Pod 4 Instrument Uncut - Usable Face 4.3" x 19.7" - White

Specifications:

• 4 Instrument
• Color: White
• Depth: 3.2"
• Usable Face: 4.3H" x 19.75W"

Scanpod Range

The exciting range of instrument pods takes a fresh look at the challenge of installing chartplotters, radar displays, instruments and autopilot control onto yachts and powerboats

Features:

• Simplified range - easy product selection
• Manufactured from acrylic caped ABS plastic - tough, durable and UV stable
• Tamper proof stainless fastenings - secure install without self-tapping into plastic
• Innovative watertight seal system - full instrument protection supplied uncut to fit any display

Scanpod Single Instrument Pod - Uncut - Arm Mounted - Fits 1" - 1.3" Rails

Current sailboat designs often have very open cockpits with few options for installing retro-fit instruments.

Options available to install a 7" display or standard instrument.

Arm Mounted:

• Extend the Rail Pod away from narrow or crowded rails for better viewing
• Designed to ensure the Pod is always positioned for best viewing, whatever the angle of the rail

Scanpod Single Instrument Pod Rail Mount - Cut f/Standard Instrument - Fits 1" - 1.33" Rails

Features:

• Applications: Designed for (1) Standard Instrument
• Current sailboat designs often have very open cockpits with few options for installing retro-fit instruments
• The Rail Pod gives you an option for fitting smaller displays and instruments directly onto a rail, in a position which suits you
• Rail Mounted
• Universal Fixing
• Fits pedestal rails from 25mm to 33.7mm (0.98" - 1.33")
• Fit your display onto standard and curved rails
• Great Viewing Options Viewing angle can be set upon installation
• Cables are routed internally through the clamp and onto the rail
• Increased Protection
• Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it won't deteriorate over time
• Supplied pre-cut with a 91mm diameter hole to accept all major brands of standard sized instrument heads

Scanpod Slim Deck Pod - f/10" to 12" Display - White

Solve the challenge of finding a level mounting surface to install your displays onto your powerboat, RIB or sailboat wheelhouse.

Features:

• Fits 10” to 12” displays
• Usable face 14W x 9.6H
• Swivel & Tilt Base
  One handed quick release action. Simply release the lever, swivel and tilt to suit your requirements before locking back into position
• Best viewing angle
  An adjustable ball joint allows range of movement and multiple mounting angles
• Added Strength
  Inner bracing plate secures the Deck Pod base to the pod and gives increased rigidity to the assembly eliminating potential damaged from shock and vibration
• Overhead mounting
  Deck Pod models can be overhead mounted.
• Hassle Free Install & Service 
  Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing.
• Increased Protection 
  Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it wont deteriorate over time.
• Supplied Uncut
  As standard you will receive your Scanpod uncut

Scanpod Slim Deck Pod - Up to 8" Display

Solve the challenge of finding a level mounting surface to install your displays onto your powerboat, RIB or sailboat wheelhouse.

Features:

• Fits up to 8” displays
• Usable face 11.4W x 7.5H
• Swivel & Tilt Base
  One handed quick release action. Simply release the lever, swivel and tilt to suit your requirements before locking back into position
• Best viewing angle
  An adjustable ball joint allows range of movement and multiple mounting angles
• Added Strength
  Inner bracing plate secures the Deck Pod base to the pod and gives increased rigidity to the assembly eliminating potential damaged from shock and vibration
• Overhead mounting
  Deck Pod models can be overhead mounted.
• Hassle Free Install & Service 
  Fixings fit from back to front cutting their threads into injection moulded ABS inserts designed into the Pod front. This design allows for a quick and safe install and repeat servicing.
• Increased Protection 
  Pod seal is manufactured from a high tear strength silicone, it has a very high resistance to heat and UV so you can have confidence that it wont deteriorate over time.
• Supplied Uncut
  As standard you will receive your Scanpod uncut

Stainless Steel Low-Profile Cable Seal for Cables 2-8mm

The DS-LP-16-S Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 2–8 mm (0.08"–0.35") and connectors up to Ø16mm (0.63"), ensuring a seamless and impact-resistant solution.

Premium Construction

Crafted with attention to detail, its marine-grade 316 stainless steel construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. 316 stainless steel has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of Scanstrut's 316 stainless steel design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.

Low-Profile Design

The Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 73% in comparison to Scanstrut's DS16-P seal. This translates to a clean, flush, more refined look.

Watertight Installation

Achieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.

Effortless and Repeat Installations

Featuring captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.

Features:

• IP68 Waterproof
• Designed for 2–8mm cables (0.08"–0.35").
• UV Resistant
• Constructed from marine-grade 316 stainless steel
• No messy sealant, ensuring a tidy finish
• Simplified installation that saves you time and effort
• Guaranteed 100% watertight seal
• Perfect for solar panels, light bars, rooftop electronics, and more
• Each cable seal is installed by using a hole saw, keeping seal technology below the mounting surface

Stainless Steel Low-Profile Cable Seal for Cables 4-9mm

The DS-LP-21A-S Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 4–9 mm (0.15"–0.35") and connectors up to Ø21mm (0.82"), ensuring a seamless and impact-resistant solution.

Premium Construction

Crafted with attention to detail, its marine-grade 316 stainless steel construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. 316 stainless steel has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of Scanstrut's 316 stainless steel design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.

Low-Profile Design

The Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 68% in comparison to Scanstrut's DS21A-P seal. This translates to a clean, flush, more refined look.

Watertight Installation

Achieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.

Effortless and Repeat Installations

Featuring captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.

Features:

• IP68 Waterproof
• Designed for 4–9mm cables (0.15"–0.35")
• UV Resistant
• Constructed from marine-grade 316 stainless steel
• No messy sealant, ensuring a tidy finish
• Simplified installation that saves you time and effort
• Guaranteed 100% watertight seal
• Perfect for solar panels, light bars, rooftop electronics, and more
• Each cable seal is installed by using a hole saw, keeping seal technology below the mounting surface

Stainless Steel Low-Profile Cable Seal for Cables 9-14mm & Connectors Up to Ø21mm

The DS-LP-21B-S Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 9–14 mm (0.3–0.5") and connectors up to Ø21mm (0.83"), ensuring a seamless and impact-resistant solution.

Premium Construction

Crafted with attention to detail, its marine-grade 316 stainless steel construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. 316 stainless steel has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of Scanstrut's 316 stainless steel design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.

Low-Profile Design

The Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 68% in comparison to Scanstrut's DS21B-P seal. This translates to a clean, flush, more refined look.

Watertight Installation

Achieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.

Effortless and Repeat Installations

Featuring captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.

Features:

• IP68 Waterproof
• Designed for 9-14mm cables (0.35"–0.55")
• UV Resistant
• Constructed from marine-grade 316 stainless steel
• No messy sealant, ensuring a tidy finish
• Simplified installation that saves you time and effort
• Guaranteed 100% watertight seal
• Perfect for solar panels, light bars, rooftop electronics, and more
• Each cable seal is installed by using a hole saw, keeping seal technology below the mounting surface

Stainless Steel Low-Profile Cable Seal for Cables 9-14mm & Connectors Up to Ø30mm

The DS-LP-30-S Low-Profile Cable Seal is engineered to effortlessly accommodate cables ranging from 9–14mm (0.3–0.5") and connectors up to Ø30mm (1.18"), ensuring a seamless and impact-resistant solution.

Premium Construction

Crafted with attention to detail, its marine-grade 316 stainless steel construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. 316 stainless steel has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of Scanstrut's 316 stainless steel design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.

Low-Profile Design

The Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 68% in comparison to our DS30-P seal. This translates to a clean, flush, more refined look.

Watertight Installation

Achieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.

Effortless and Repeat Installations

Featuring captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.

Features:

• IP68 Waterproof
• Designed for 9-14mm cables (0.35"–0.55")
• UV Resistant
• Constructed from marine-grade 316 stainless steel
• No messy sealant, ensuring a tidy finish
• Simplified installation that saves you time and effort
• Guaranteed 100% watertight seal
• Perfect for solar panels, light bars, rooftop electronics, and more
• Each cable seal is installed by using a hole saw, keeping seal technology below the mounting surface

Stainless Steel Low-Profile Multi Cable Seal for Cables Up to 15mm

The DS-LP-MULTI-S Low-Profile Cable Seal is engineered to effortlessly accommodate multiple cables up to Ø15mm (0.59"), ensuring a seamless and impact-resistant solution.

Premium Construction

Crafted with attention to detail, its marine-grade 316 stainless steel construction is not only aesthetically pleasing but also built to thrive in the outdoor environment. 316 stainless steel has exceptional corrosion resistance and durability, making it the perfect choice for withstanding the elements and ensuring the installation remains intact even in the harshest conditions. The fine finish of Scanstrut's 316 stainless steel design adds a touch of sophistication to the installation, elevating both the form and function of the cable installation.

Low-Profile Design

The Scanstrut slimline design was purpose-built to reduce the overall mounting height of the cable seal by 61% in comparison to Scanstrut's DS-MULTI seal. This translates to a clean, flush, more refined look.

Watertight Installation

Achieve peace of mind with Scanstrut watertight installation. The tapered bung forms a secure seal, while every unit has a closed-cell base seal for 100% waterproof assurance. All models have undergone rigorous IP68 testing and approval to ensure they are outdoor-ready.

Effortless and Repeat Installations

Featuring captive nuts to simplify assembly and allow for reliable repeat installations. Each unit is supplied with pre-drilled and blank bungs, streamlining the setup process. Also, there's no need to remove the cable connector during installation, thanks to the convenient split-seal option.

Features:

• IP68 Waterproof
• Designed for multiple cables up to 15mm (0.59”).
• UV Resistant
• Constructed from marine-grade 316 stainless steel
• No messy sealant, ensuring a tidy finish
• Simplified installation that saves you time and effort
• Guaranteed 100% watertight seal
• Perfect for solar panels, light bars, rooftop electronics, and more
• Each cable seal is installed by using a hole saw, keeping seal technology below the mounting surface

• The 'Standard' box provides 5 screw-down terminals
  
• Wateright Installation - Cables are quickly routed into the box through an IP66 elastomeric membrane, guaranteeing protection against water ingress.
  
• Mounting Bracket Included - Boxes can be fitted directly to the required mounting surface. A surface mounting bracket is also included to allow removal of the box for inspection if necessary.