Shop by Brand: Rule

3700 GPH General Purpose End Suction Centrifugal Pump - 24V

The Rule General Pupose Pump is designed 1-1/2" (38mm) inlet and 1-1/2" (38mm) discharge outlet. The Rule General Purpose Pump must be mounted below the waterline. It does not deliver high pressure, nor is it self priming. It delivers lots of water but at low pressure. 24 volts DC. 

Features:

• 3700-GPH
• 24-Volt
• White/Red
• 3-Year Warranty

WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

• Fully Submersible
  
• Easy clean snap lock strainer
  
• Silent and vibrationless operation
  
• Anti-airlock protection
  
• Compact, efficient long life motor
  
• Ignition protected
  
• No burn-out when run dry
  
• Rust and Corrosion protection
  
• Used by leading boatbuilders worldwide
  
• marine grade blocked wiring

WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

• Efficient high-volume air flow
  
• Quiet operation
  
• Low amp draw
  
• Slip-on inlet and outlet ducting connections
  
• Sealed motor shaft for moisture protection
  
• Corrosion resistant nickel-plated motor housing
  
• IMCI (CE)
  
• USCG 183.410 Compliant: Ignition protected

• Approvals: CE
  
• Dimensions (H x W x D): 102 x 152 x 106 (mm)
  
• ElectricalCharacteristics: 4.3 Amp
  
• Flow Rate (US gallons & litres): 235 CFM @ Open Flow
  
• Fuse Size: 7 (amp)
  
• Product Inlet Fitting: 4" (102 mm) Ducting
  
• Product Outlet Fitting: 4" (102 mm) Ducting
  
• Voltage: 13.6 (Vdc)

WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

500 GPH Replacement Motor Cartridge for Tournament Series Pumps

The innovative Tournament Series Pumps feature these removable motor cartridges, which are fast and convenient to replace.

Features:

• 500 GPH
• Replacement
• Specifically for Tournament Series Pumps

500 GPH Standard Bilge Pump Kit with Float Switch - 12V

Features:

• Completely submersible
• 500 GPH/1893 LPH
• Ignition protected
• Mercury-Free Switch
• Stainless Steel Shaft
• High Abrasion, Tin Coated Silicone Blocked Wire
• Includes Back Flow Preventer
• 3-Year Warranty

• Check valve included with hidden air vent to prevent airlocking
  
• True electromagnetic suppression (EMC)
  
• A built-in thermal cell that protects the pump and the vessel when things get too hot

• Completely automatic with manual override - No Float Switch Needed!
  
• Submersible and Ignition Protected
  
• High efficiency, low amp motor
  
• Stainless-steel shaft
  
• Includes backflow preventer

WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Check valve included with hidden air vent to prevent airlocking
  
• True electromagnetic suppression (EMC)
  
• A built-in thermal cell that protects the pump and the vessel when things get too hot

• Completely automatic with manual override - No Float Switch Needed!
  
• Submersible and Ignition Protected
  
• High efficiency, low amp motor
  
• Stainless-steel shaft
  
• Includes backflow preventer

WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Non-automatic - used with a panel switch or Rule float switch
  
• Submersible and Ignition Protected
  
• High efficiency, low amp motor
  
• Stainless-steel shaft
  
• Includes backflow preventer

WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Non-automatic - used with a panel switch or Rule float switch
  
• Submersible and Ignition Protected
  
• High efficiency, low amp motor
  
• Stainless-steel shaft
  
• Includes backflow preventer

WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Rule 7700D GPH Evacuator Pump - 12V

Rule's latest Evacuator Pump is ideal for fast evacuation of water from a vessel. Long a favorite of tow boat operators, the 7700D is comprised of two 4000-gallon-per-hour pumps in tandem, with a net volume at open discharge is 7700 gallons per hour. No more hoping to start a gas-powered "crash" pump.  Just connect the two sets of power leads to a 12v battery and the pump starts working. A 3" discharge hose is required in this application.

Features:

• High-capacity 12V Utility Pump
• Up to 7,700 GPH (29,148 LPH)
• Built-in backup: each pump can operate independently if necessary
• 3" Barbed discharge port
• Long power lead, ideal for setting up quick connections to power

• Gas resistant strainer base
  
• 3/4" discharge outlet
  
• Fully Submersible
  
• Easy clean snap lock strainer
  
• Silent and vibrationless operation
  
• Anti-airlock protection
  
• Compact, efficient long life motor
  
• Ignition protected
  
• No burn-out when run dry
  
• Rust and Corrosion protection
  
• Used by leading boatbuilders worldwide
  
• marine grade blocked wiring

WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

800 GPH Legacy Shower Drain Replacement Pump - 12V - Fits 97A & 98A Shower Drain Boxes

Replacement 12V pump for legacy 97A and 98A shower drain box only. 

*For regular bilge requirements, use part number 20DA

Features:

• Connections: For 19mm (3/4") bore hose
• Dimensions: 95mm high, 60mm base diameter
• Fuse Size: 5AMP
• Output: Up to 50 liters/minute (11 gallons/minute) 
• Max. recommended discharge head 2M
• Packaged Dimensions: L:15.00 x H:8.00 x W:19.00cm
• Actual Weight: 0.38 Kg  (Approx. 0.58kg packed)

800 GPH Legacy Shower Drain Replacement Pump - 24V - Fits 97A-24 & 98A-24 Shower Drain Boxes

Replacement 24V pump for legacy 97A-24 and 98A-24 shower drain box only.

*For regular bilge requirements, use part number 20DA-24

Features:

• Connections: For 19mm (3/4") bore hose
• Dimensions: 95mm high, 60mm base diameter
• Fuse Size: 5AMP
• Output: Up to 50 liters/minute (11 gallons/minute) 
• Max. recommended discharge head 2M
• Packaged Dimensions: L:15.00 x H:8.00 x W:19.00cm
• Actual Weight: 0.38kg  (Approx. 0.58kg packed)

• Check valve included with hidden air vent to prevent airlocking
  
• True electromagnetic suppression (EMC)
  
• A built-in thermal cell that protects the pump and the vessel when things get too hot

• Completely automatic with manual override - No Float Switch Needed!
  
• Submersible and Ignition Protected
  
• High efficiency, low amp motor
  
• Stainless-steel shaft
  
• Includes backflow preventer

WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Non-automatic - used with a panel switch or Rule float switch
  
• Submersible and Ignition Protected
  
• High efficiency, low amp motor
  
• Stainless-steel shaft
  
• Includes backflow preventer

WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Non-automatic - used with a panel switch or Rule float switch
  
• Submersible and Ignition Protected
  
• High efficiency, low amp motor
  
• Stainless-steel shaft
  
• Includes backflow preventer

WARNING: This product can expose you to chemicals including 1,3-Butadiene which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer, and BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

• Voltage: 24 or 32VDC
  
• Amp Draw: 10 or 6.5 Amp
  
• Dimensions: 2" x 3-1/4"

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Dry Bilge Pump & Panel Switch

A Dry Bilge is a clean, odorless bilge.

Rule now offers the best, most effective method of removing almost all of the water in your bilge, leaving 1/8” or less, keeping your bilge fresh, clean, and dry.

Features:

• Drains the bilge almost dry
• Filter-free design
• Self-priming to 9.5' (3 m)
• Able to run dry without damaging the pump
• Up to 4.0 GPM (15 LPM) flow
• Back flow prevention
• Connections for 3/4" (19 mm) hose barbs
• Rotating pump head and ports
• Compact and simple design
• 3/4" (19 mm), plastic, 90° thru-hull fitting included

WARNING: This product can expose you to chemicals including FORMALDEHYDE (GAS) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

High Water Bilge Alarm with Switch & Gauge - 24V

Using a compact float switch and dash mounted alarm, Rule provides boaters with a warning to high bilge water levels. Ideal for larger yachts and commercial vessels larger than 26' with unmanned compartments that have to comply with CFR 182.530. A bright LED indicator light provides a visual alarm when ambient noise levels exceed alarm volume. Constantly monitor your bilge for water and stay compliant to Coast Guard regulations with a Hi-Water Bilge Alarm from Rule.

Features:

• Visible and audible alarm to monitor bilge water levels
• Includes mercury-free float switch and dash mounted alarm
• Complies with CFR 182.530
• 24V

WARNING: This product can expose you to chemicals including STYRENE which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Hose Adapter - 1-1/2" to 1-1/8"

Features:

• Straight Hose Adapter
• Adapts a 1-1/2" Pump Outlet to 1-1/8" Hose
• High Impact Plastic