Shop by Brand: Johnson Pump

Ultima Bilge Pump
UltimaBilge Pumps are the latest addition to the Johnson Pump brand lineup. Integration of the Ultima "field effect" sensing technology into the bilge pump body creates a sleek, reliable and compact unit with integrated switch ready to install and run for years and years of unerring service. Available in 600-800-1000-1250 GPH versions. Voltage 12 V DC. For UltimaBilge 600 GPH-1000 GPH, we have easy-to-install Dura-Port discharge ports to eliminate stress cracking caused by over-tightened hose clamps. These pumps will be delivered including both a straight and a 90 degree smooth elbow Dura-Port.

All version are delivered with a removable check valve.

The Ultima Bilge pumps may be manually operated via the Johnson Pump bilge control panel.
CE-Approved

Features:

• Compact, all-in-one unit
  
• Integrated Ultima Switch sensing right into the pump body
  
• No Mercury
  
• Removable clip on basket design
  
• Removable impeller cover allows for easy clean out
  
• 3-wire device can be run in auto or manual override mode
  
• No tools needed for maintenance
  
• Extremely energy efficient
  
• Water-cooled motor for long service intervals
  
• Meets the international standard, ISO 8849 marine
  
• Pump Body: ABS
  
• Shaft Seal: Lip Seal
  
• Shaft: Stainless steel
  
• Voltage: 12 V DC
  
• Capacity 3 ft (0.9 m) head (13.6 V): 38 l/min - 600 GPH
  
• Capacity straight (13.6 V): 51 l/min - 800 GPH
  
• Amperage: 3 A
  
• Fuse Size: 5 A
  
• Connection: 3/4"
  
• Length:142 mm - 6"
  
• Width:82 mm - 3.2"
  
• Height:105 mm - 4.1"
  
• Weight:0.66 kg - 23.3 oz.

Ultima Switch
New digital technology uses the Mirus field effect detector cells producing micro-electrical fields that detect disruptions caused by water and fluids. Detector cells are totally sealed, are never in contact with the water, will not corrode and are not affected by oil or foreign debris.
ULTIMA activates at a 50 mm (2") fluid level and deactivates at a 20 mm (3/4") fluid level. A 3 second delay prevents false starts. ULTIMA switch is rated to handle all Johnson Pump submersible pumps pumps up to 20 amps at 12 or 24 volts.

Features:

• No moving parts
  
• Totally sealed solid state electronics and field detectors
  
• No mercury
  
• No exposed sensors eliminate corrosion possibilities
  
• Unique 3-way switch disables piezo alarm while keeping warning LED lit
  
• Environmentally sensitive
  

PUMProtector™ Strainer
The PUMProtector™ inlet and universal strainers feature transparent covers for simple inspection, a wide variety of KlickTite™ port connectors for simple installation and removal, and high quality materials for simple maintenance. The connectors make it possible to remove the entire unit for thorough cleaning wherever it's most convenient.

Materials
Strainer - Polyamide 66, black
Cover - Acrylic, clear, 01-36012 P02
Screen - Stainless steel, 20 mesh
O-rings - Silicone and EPDM

Diameter 80 mm / 3.15"
Height 60 mm / 2.35"
Weight 0.15 kg / 0.33 lbs
Mesh size 20

Max Liquid Temp. - +50°C - +120°F
Max Temp. for Drinking Water - +30°C - +85°F
KlickTite™ Connector - 2 x 1/2" hose / 3/8" NPT, 2 x 3/4" hose / 1/2" NPT

PUMProtector™ Strainer
The PUMProtector™ inlet and universal strainers feature transparent covers for simple inspection, a wide variety of KlickTite™ port connectors for simple installation and removal, and high quality materials for simple maintenance. The connectors make it possible to remove the entire unit for thorough cleaning wherever it's most convenient.

Materials
Strainer - Polyamide 66, black
Cover - Acrylic, clear, 01-36012 P02
Screen - Stainless steel, 40 mesh
O-rings - Silicone and EPDM

Diameter 80 mm / 3.15"
Height 60 mm / 2.35"
Weight 0.15 kg / 0.33 lbs
Mesh size 40

Max Liquid Temp. - +50°C - +120°F
Max Temp. for Drinking Water - +30°C - +85°F
KlickTite™ Connector - 2 x 1/2" hose / 3/8" NPT, 2 x 3/4" hose / 1/2" NPT

Viking Power 16 - 24V

A modern, single-chamber, self-priming diaphragm pump that can be set up in several different pump/motor configurations. It is easy to install anywhere after the drain outlet in the wastewater system or as a bilge pump in any leisure craft - new or used.

Its non-choke valves mean that no in-line filters are necessary. The pump can be run dry, and it can also handle a mixture of air and water without difficulty. The Viking Power 16 is self-priming up to a height of 3 meters.

With its low pulse and muffled rubber bracket, this pump offers quiet operation. Specifically designed to pump waste water, the Viking Power 16 has been built to last, and engineered for easy maintenance. When it comes time to replace the premium grade reinforced nitrile rubber diaphragm, you can put in a spare without even removing the pump from the system. Delivered with 1" hose and 3/4" hose 1/2" BSP KlickTite™ XL connectors. 90° KlickTite™ XL connectors available as extra accessory.

Capacity, Open Flow:16 l/min - 4.2 GPM
Capacity at 0.1 bar: 15 l/min - 4.0 GPM
Max Lift:3M - 9.8'
Max Head:3M - 9.8'
Connection: KlickTite™ XL connectors for 1" hose or 3/4" hose and 1/2" BSP threads; straight and 90°(optional)

Viking Universal Manual Bilge Pump - 38mm

Heavy duty, self-priming, hand-powered bilge pump for nearly any type of installation

Viking Universal's mounting bracket allows for vertical or horizontal surface mounting. With the optional Through Deck kit the pump can be installed behind bulkheads or below the deck. To minimize required space the Viking Universal excels at adaption. The simple switching of the valves together with the connections allows you to choose flow direction. The included KlickTite™ straight and 90° hose connections can be used in combination. The hose connections and even the pump housing can be easily rotated for optimal positioning.

While designed as a powerful bilge pump, the Viking Universal's large 38mm (1-1/2") valves enable the pump to also be used for pumping toilet waste.

Fasteners are included for stowing the handle and the safety clasp ensures that the handle cannot be lost while not in use or during an emergency situation. Viking Universal meets ISO 15083, "Bilge pumping systems".

Specifications:

Body and cover:Polypropylene plastic reinforced with 30% fiberglass

Diaphragm and valves:Nitrile rubber

Wetted parts:PP30GF, PA66 GF30, POM, stainless steel, nitrile rubber

Maximum suction:3M (10')

Maximum head:4M (13')

Combined suction/head:7M (23')

Connection:KlickTite? connectors 38mm (1-1/2") hose. Both straight and 90° bends are included

Max. liquid temp:+60°C (140°F)

Weight:1,5 kg (3.3 lbs)

F-6 Series Repair Kit

Wash Down Control - 12V - 2-Way On/OFf

Features:

• 12V
• 2-Way On/Off

Wash Down Flexible Hose - 25'

Features:

• Expandable X-hose flexible hose
• Easy to use, portable, folds up after use, easy to stow away
• Handles wash down pump pressure
• Size: 25'

Washdown Spray Pistol Connector with 25' Hose

Washdown Spray Nozzle

Features:

• Aqua Jet Spray Pistol Replacement
• Compatible with either the 3.5 or the 5.2 Wash Down Pump Kits
• Constructed out of heavy duty plastic

Coiled Wash Down Hose - 25' - 1/2" Diameter

Features:

• Parable with all Aqua Jet Washdown Pumps
• 25' hose length
• 1/2" hose diameter

Washer F5B, F6B & F7B

Johnson Pump washer specifically for F5B, F6B and F7B.

Water Pressure Regulator

Features:

• Reduces city water pressure to 40-50 psi
• Standard 3/4" GHT thread offers an easy hookup
• Corrosion resistant bronze build