Shop by Brand: I2Systems Inc

Ember E1150Z Snap-In - Polished Chrome - Round - Warm White Light

Product Highlights:

• 2.5 watts
• 9-30V DC input/9-15 AC Input
• 0 to 100% Dimming
• Stainless Steel Construction
• Asymmetric Light Distribution
• Wide lateral angle
• 6 Vibrant Color Options
• IP67, Exterior Rated
• Up to 50,000 Hours of Operation

Features:

• Advanced optical system - Asymmetric beam angle eliminates glare while providing excellent surface illumination
• 0 - 100% Dimming - Connection with i2Systems LightLink Series allows simple and seamless integration to most of today's conventional dimming systems
• Rugged design - Stainless steel construction, sealed design, and electronic regulation to the LED source ensure product longevity
• No heat or UV in the light beam - Fixture lens remains much cooler than halogen sources, allowing safe and "burn free" operation
• In addition, no UV means reduced risk of fading or deteriorating products or artifacts on display
• Stainless Steel Trim with PVD - Removable trim ring and Physical Vapor Deposition (PVD) coating provides a very durable surface finish which will not tarnish or discolor
• Snap-in Installation - Simply bore a 1.25" diameter hole and snap the fixture into place
• Fixture accomodates wall thicknesses ranging from .125" to .625"

Exclusive Technology:

• SmartDriver Integrated - i2Systems SmartDriver Technology is integrated directly inside every fixture
• Connect the Ember to a wide range of voltages without sacrificing light output or lifetime
• No external drivers are required and wiring is made simple
• AccuWhite - i2Systems AccuWhite Technology allows integration of Ember fixtures to traditional applications without sacrifice in color temperature (CCT) or color rendering (CRI)
• AccuWhite ensures and accurate and consistent color matching from fixture to fixture and across product lines
• LightLink Compatible - i2Systems LightLink controllers represent the next generation in lighting control and connectivity
• LightLink modules provide seamless integration of today's marine dimming systems through a wide variety of desirable interfaces

LightLink LL-101 Marine Dimming Module
Part #: LL-101

Operation is simple! Press and hold the momentary switch to initiate dimming cycle. Dimming cycle continues to dim as long as switch is engaged, ranging from 100% to approximately 5% intensity holding 2 seconds at each position before dimming the opposite direction. Briefly press and release momentary switch for on/off operation.

Specifications:

• Input Voltage: 6-36 Volt DC
  
• Dimensions: Width: 1.5" x Height: 0.5" x Depth: 1.0"

Features:

• Compatible with i2Systems Apeiron, Ember and Profile lights
  
• Dimming control via a momentary switch or contact
  
• Small size, encapsulated, fits into most switch boxes

The LL-101 means that no matter what level you have the lights at when you turn them off, they will resume at full brightness when turned back on.

The LightLink LL-101 is capable of dimming and controlling up to
(20) i2Systems Fixtures, including:

• Apeiron A1110
  
• Apeiron A2162
  
• Ember E1150
  
• Profile P1100

(20') i2Systems

• S-Line S1200

LightLink™ Pro LED Module for Apeiron PRO

Press and hold momentary switch to initiate light color cycle. Dimming cycle continues to dim as long as switch is engaged. 

Briefly press and release momentary switch for on/off operation. 

For 2 and 3 Color enabled Fixtures, double-click momentary switch to enter color 2, triple-click for color 3. 

Add additional momentary switches in parallel with the shown switch for multi-location control. 

Upon loss of power, intensity and LED color of controlled Fixtures return to previous state, using LightLink’s onboard non-volatile memory.

Features:

9-36V DC Input 

Low Level Dimming Using Momentary Switch Interface 

Enables Smart Tri-Color Operation 

Small Size, Fully Potted

Non-Volatile Memory Recalls Last Intensity

Profile P1101 2.5W Surface Mount Light - Warm White - Brushed Nickel Finish

The Profile couples the ease of surface mount installation with beautiful light and a premium titanium-coated finish. 

Small in size and simple to install, fixture mounts to most any marine surface - inside and out.

Rugged & Waterproof

With stainless steel construction and a titanium coated trim bezel, expect industry leading fit and finish that will last. IP67 waterproof rated*.

*IP67 rated. Not for use in submersible applications.

Features:

• Surface Mount - Less than 3/4" thick
• Use your existing wiring and switch
• Multiple color options - 1 fixture
• Simple 2 wire hookup
• 3.48" Round
• 0.72" Deep
• LED
• Marine Grade
• Refit friendly
• Power: 2.5W
• Beam Angle: 120°

Typical Applications:

• Hardtop
• Arch
• Cockpit
• Courtesy
• Pilot House

Profile P1101 2.5W Surface Mount Light - Warm White - Chrome Finish 

The Profile couples the ease of surface mount installation with beautiful light and a premium titanium-coated finish. 

Small in size and simple to install, fixture mounts to most any marine surface - inside and out.

Rugged & Waterproof

With stainless steel construction and a titanium coated trim bezel, expect industry leading fit and finish that will last. IP67 waterproof rated*.

*IP67 rated. Not for use in submersible applications.

Features:

• Surface Mount - Less than 3/4" thick
• Use your existing wiring and switch
• Multiple color options - 1 fixture
• Simple 2 wire hookup
• 3.48" Round
• 0.72" Deep
• LED
• Marine Grade
• Refit friendly
• Power: 2.5W
• Beam Angle: 120°

Typical Applications:

• Hardtop
• Arch
• Cockpit
• Courtesy
• Pilot House

Profile P1120 Tri-Light Surface Light - Red, Cool White & Blue - Brushed Nickel Finish

3 Colors with Only 2 Wires

Award-winning i2Wave technology, allows users to change between 3 colors of light by simply toggling the power to the fixture.

Small in size and simple to install, fixture mounts to most any marine surface - inside and out.

Rugged & Waterproof

With stainless steel construction and a titanium coated trim bezel, expect industry leading fit and finish that will last. IP67 waterproof rated*.

*IP67 rated. Not for use in submersible applications.

Features:

• Surface Mount - Less than 3/4" thick
• Use your existing wiring and switch
• 3 colors, 1 fixture
• Simple 2 wire hookup
• Color: Red, White & Blue
• 3.48" Round
• 0.72" Deep
• LED
• Marine Grade
• Refit friendly
• Power: 1.5W
• Beam Angle: 120°

Typical Applications:

• Hardtop
• Arch
• Cockpit
• Courtesy
• Pilot House

Profile P1120 Tri-Light Surface Light - Red, Cool White & Blue - Chrome Finish

3 Colors with Only 2 Wires

Award-winning i2Wave technology, allows users to change between 3 colors of light by simply toggling the power to the fixture.

Small in size and simple to install, fixture mounts to most any marine surface - inside and out.

Rugged & Waterproof

With stainless steel construction and a titanium coated trim bezel, expect industry leading fit and finish that will last. IP67 waterproof rated*.

*IP67 rated. Not for use in submersible applications.

Features:

• Surface Mount - Less than 3/4" thick
• Use your existing wiring and switch
• 3 colors, 1 fixture
• Simple 2 wire hookup
• Color: Red, White & Blue
• 3.48" Round
• 0.72" Deep
• LED
• Marine Grade
• Refit friendly
• Power: 1.5W
• Beam Angle: 120°

Typical Applications:

• Hardtop
• Arch
• Cockpit
• Courtesy
• Pilot House

Profile P1120 Tri-Light Surface Light - Red, Cool White & Blue - White Finish

3 Colors with Only 2 Wires

Award-winning i2Wave technology, allows users to change between 3 colors of light by simply toggling the power to the fixture.

Small in size and simple to install, fixture mounts to most any marine surface - inside and out.

Rugged & Waterproof

With stainless steel construction and a titanium coated trim bezel, expect industry leading fit and finish that will last. IP67 waterproof rated*.

*IP67 rated. Not for use in submersible applications.

Features:

• Surface Mount - Less than 3/4" thick
• Use your existing wiring and switch
• 3 colors, 1 fixture
• Simple 2 wire hookup
• Color: Red, White & Blue
• 3.48" Round
• 0.72" Deep
• LED
• Marine Grade
• Refit friendly
• Power: 1.5W
• Beam Angle: 120°

Typical Applications:

• Hardtop
• Arch
• Cockpit
• Courtesy
• Pilot House