Shop by Brand: Furuno

NMEA 2000 T-Connector 

Furuno's NMEA2000 T-Connector for Female/Female/Male. 

NMEA2000 Micro Cable 6M Double Ended - Male to Female - Straight

Cable NMEA2000 Micro 6M Double-Ended

Optional Mount with Knobs

This optional bracket is used for the NavNet TZtouch2 TZTL12F, when you want to mount the unit to a flat top. This mount allows you to adjust the angle of the unit for the optimum viewing angle. Two knobs are included with this bracket.

Compatible Devices:

• NavNet TZtouch2 TZTL12F

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

PG700 Integrated Heading Sensor, NMEA2000

The PG-700 is a rate compensated heading sensor that incorporates innovative electromagnetic compass technology for highly accurate and stable readouts of your ship's heading. These sophisticated components are contained within a rugged, compact case. Unique design elements make the PG-700 virtually maintenance-free and easy to install. The PG-700 heading sensor detects terrestrial magnetism and produces compass data that can be utilized in CAN bus network.

Features:

• Angular velocity sensor and magnetic bearing sensor incorporated
  
• Automatic determination of installation site suitability
  
• L-shaped mounting base for mounting on bulkhead
  
• Output of magnetic bearing data to FURUNO CAN bus device

Pole Mount for SCX20 & SCX21 Satellite Compass

This Furuno pole mount is specifically for the Furuno SCX20 and SCX21 satellite compasses.

Furuno Power Cable Assembly - 3M

3 Meter Power Cable

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Power Cable for 1621 DFF3D 1850 - 3.5M

Furuno's 3.5M power cable assy for DFF3D.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Power Cable for TZT Displays

Power cable for Furuno's displays.

Compatible with:

• TZT9F display
• TZTL12F display
• TZTL15F display

*Sold as an Individual

Power/Data Cable

This is a dual purpose cable. It is utilized as a Power Cable Assembly for the FCV585 and FCV620 Fish Finders. In addition, this cable can be utilized as an NMEA0183 data cable for the GP33.

*Note: When used with the GP33, the fused portion of the red and black wire MUST be removed. In this application, this cable provides data only and CAN NOT be used to power the GP33.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Radar Cable f/18xx & 19xx Series - 15M

15M cable for:

• 1823C
• 1824C
• 1832
• 1833
• 1834
• 1932
• 1942

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Furuno's overhead display RAM mount specifically for Furuno's FCV585, FCV620, FCV627, & FCV587.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RDP154 12.1" Color LCD Radar Display for FR8xx5 Series

Features:

• 12.1"
  
• Color LCD Radar Display
  
• Compatible Devices: FR8xx5 Series

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Furuno Retainer Ring w/Trackball

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Retrofit Kit f/10.4" VX2 to TZTL12F

Retrofit Kit to go from 10.4" VX2 to TZTL12F

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

FAP6112

Rudder Reference Unit for the Furuno NAVpilot Series of Autopilots.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Second Control Unit for NavPilot 711C

Kick back, relax and let NavPilot steer you to your destination!
FURUNO's NavPilot is a revolutionary autopilot with a sunlight viewable display designed for a variety of vessels. It utilizes a self-learning and adaptive software algorithm, and plays the ultimate role in course-keeping capability. NavPilot dynamically adjusts essential parameters during navigation, such as vessel speed, trim, draught, tide and wind effects, dead band, weather and more. These parameters are stored in system memory and continuously optimized to make the NavPilot more versatile.

The NavPilot 711C features a color day/night graphic display, offering much better sunlight viewability during the day while not affecting your night vision when the sun goes down.

Self-learning and adaptive software
From the first dock-side setup through the last voyage you made, NavPilot continues to learn your vessel's steering characteristics, allowing for real-time, dynamic adjustments to make the boat's steering more accurate.

SAFE HELM and POWER ASSIST features provide Efficient and Effective Helm Steering Control
The optional SAFE HELM and POWER ASSIST features provide a unique interface to the vessel's hydraulic hand steering system, providing unrivaled comfort and control of steering directly from any manual helm on the vessel. These two modes greatly reduce steering effort and enhance the safety of your autopilot.

The POWER ASSIST mode incorporates the SAFE HELM concept and provides speed-based, power assisted steering, which greatly reduces manual helm effort in maneuvering situations. POWER ASSIST is a unique helm-activated assisted steering feature that can augment or replace separate electric and power-robbing, engine-driven power steering systems on many vessels. POWER ASSIST reduces steering system complexity and costs while increasing economy.

SAFE HELM and POWER ASSIST modes will require the optional FPS8 Power Steering Module and an appropriate HRP Pumpset.

If you are interested in utilizing the "SAFE HELM" and "POWER ASSIST" features, it is highly recommend that, when installing the NavPilot 700 Series Autopilot, the optional FPS8 Power Steering Module is purchased and installed at the same time. This will eliminate the need to re-plumb the hydraulic system and run additional connection cables in the future.

FishHunter mode
FishHunter mode is a unique feature of FURUNO's NavPilot series. Find a fish target with your FURUNO sonar/sounder or bird target with your FURUNO radar and feed it to the NavPilot The NavPilot will activate the FishHunter mode to perform square, zigzag, circle, orbit, spiral or figure-eight maneuvers around the specified target at a user selected distance. This feature can also be used for Man Overboard (MOB).

Furuno's NavPilot series is designed to match the NavNet 3D, FI-50 Instrument series and other navigation equipment. The "Plug and Play" CAN bus interface allows for easy installation and exceptional interface ability.

Features:

• NavPilot 711C second control unit, single din
  
• Color day/night graphic display offers improved sunlight viewability during the day while not affecting vision when the sun goes down
  
• Revolutionary SAFE HELM and POWER ASSIST option brings unrivaled steering comfort and control at the helm (This feature will be available in an upcoming software update)
  
• Selectable "Economy" and "Precision" Navigation Modes combine adaptive technology providing fuel and power savings of up to 2.5% or more
  
• "Precision" XTE accuracy: within 18'
  
• Dual NMEA2000 network interface and Furuno CAN bus interface provides isolation and redundancy for safety
  
• Simplified activation set-up by on-screen wizard
  
• Perfect for inboard or outboard power boats and sail boats
  
• Simple one-touch mode selection enables flexible steering and course control
  
• Perfect cosmetic match with NavNet TZtouch
  
• Mix and match up to 6 displays in a single network

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Side Scan Transom Mount for TZT3

The 225T-TM904 is a Transom Mount transducer that works with the built-in CHIRP Side-Scan functionality on your NavNet TZtouch3 TZT12F, TZT16F, or TZT19F MFD.

Features:

• 150 watts on each side
• CHIRP 220-240kHz
• Transom Mount with Temperature
• 12-pin connector
• 12m (40ft) cable
• Mounting bracket and hardware included

Specifications:

• Install Type: Transom Mount
• Housing Type: Urethane

Furuno DT-800MSF - Airmar B617V Housing Style Transducer

Designed with Airmar's exclusive Broadband Ceramic Technology, the DT-800MSF's 235 kHz element improves resolution without sacrificing sensitivity. The higher power rating 100W RMS provides spot-on depth readings in as little as 0.45M (1.4') of water and can reach depths up to 180M (600')

Standard Features:

• Depth and temperature in one compact bronze housing
  
• Fast-response temperature sensor provides ±0.2°C (±0.1°F) accuracy

Weight: 1.5kg (3.4lb)
Acoustic Window: Urethane
Data Update Rate: 1 per second
Minimum Sounding Depth: 0.5M (1.6')
Maximum Sounding Depth: 180M (590)
Pressure Rating: 3M (10')
Pulse Rate: 20,000 p/nm* (5.6 Hz per knot)
Smart Sensor Supply Voltage at 100% Sound Power Output: 10 VDC to 25 VDC
Supply Current: 40 mA
Standard Cable Length: 6M
NMEA 2000® Load Equivalency Number (LEN): 4

*p/nm = pulses per nautical mile

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Snap-On Front Cover

Furuno's Snap-On Front Cover is specifically for the 10" VX2 Displays, RDP149, 1824C and 1834C.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Soft Cover for TZTL12F

Furuno's soft cover specifically for TZTL12F.

SS75M Stainless Steel Thru-Hull Chirp Transducer - 20° Tilt - Med Frequency

Features:

• Frequency: Chirp 80 - 130 kHz
• Power Rating: 600 Watts
• Connector: 10 Pin
• Tilt: 20 Degree
• Deadrise of Hull: 16-24 Degrees

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Suncover for FAP7011C

Keep your electronics safe with Furuno's protective suncover specifically for Furuno's FAP7011C display.

Suncover for FCV585

Protective Suncover for Furuno's FCV585 display.

Thru-Hull Multibeam Transducer f/DDF3D

The 165T-B54 is a multi-beam transducer for the DFF3D that affords a 120° port-starboard view of the underwater world. Its compact design allows for easy installation. A built-in motion sensor stabilizes the display to give clear and stable images, even under rough sea conditions.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Thru-Hull Side-Scan Transducer 12-Pin for TZtouch3 12, 16 & 19 Models

The 225T-SS904 is a Thru-Hull transducer that works with the built-in Side-Scan functionality on your NavNet TZtouch3 TZT12F, TZT16F, or TZT19F MFD.

Features:

• 150 watts on each side
• CHIRP 220-240kHz
• Stainless Steel Thru-Hull with Temperature
• 12-pin connector
• 12m (40ft) cable

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

TM150M Medium CHIRP Transom Mount Transducer

As Chirp continues to redefine recreational fishing, AIRMAR has expanded the lineup of broadband transducers to satisfy the growing demand for this game changing technology. New to the market are the B150M and TM150M, economical Chirp transducers designed for offshore fishing and freshwater anglers. Operating at a frequency range of 95-155 kHz, these transducers reveal fish in shallow, murky waters at medium depths (up to 2,500 feet*) along with ultra-clear target resolution.

Features:

• Depth and water temperature sensor
• Ideal for inshore or coastal fishing in shallow to medium depths
• Freshwater anglers will see fish holding close to structures and suspended fish
• Track bottom at higher boat speeds
• More coverage under your boat delivers wider arches and 26° to 17° beamwidths
• Cover the medium frequency range—CHIRPs from 95-155kHz to provide 60 kHz of total bandwidth from one transducer
• Available in plastic transom-mount with transom bracket and hardware and with a custom transom housing and cover (TM150M)
• Also available as thru-hull installation (B150M)
• Hull Type: Fiberglass, wood or metal
• 1 internal ceramic
• Exclusive Xducer ID® technology

Specifications:

• Weight: 0.45 kg (1.1 lb)
• Hull Deadrise: 2° to 20°
• Acoustic Window: Urethane

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

TM185HW High Wide CHIRP Transducer with Temp Transom Mount

High-Frequency, Wide-Beam CHIRP Transducer with Temperature - Urethane Transom Mount with Stainless Bracket 

Features:

• Power Rating: 1kW
• Function: Depth,Temperature
• Frequency: CHIRP 150-250 kHz
• Mount Style: Transom
• Install Type: Transom Mount
• Housing Type: Urethane
• Housing Material: Urethane/Stainless Bracket

TM185M Medium-Frequency CHIRP Transducer with Temperature - Urethane Transom Mount with Stainless Bracket

Features:

• Frequency: Chirp 85 - 135 kHz
• Power Rating: 1KW
• Connector: 10 Pin

TM275LHW Transom Mount CHIRP Transducer with Temp - 12-Pin Connector for TZT3

The 275LH-W series transducers are truly broadband at its best. Paired with Furuno’s DFF1-UHD, the transom mounted TM275LH-W provides a high frequency range of 150-250Khz and a constant 25° beamwidth. The “W” stands for wide and that’s what the TM275LH-W really delivers. Unlike traditional high frequency (200kHz) transducers that provide narrow performance, this unique, new wide beam/high frequency design achieves over six times the coverage under the boat compared to standard high-frequency CHIRP Transducers.

The TM275LH-W is also compatible with the FCV295 and FCV1150 variable frequency Fish Finders, providing the same frequency range with a 25° wide beamwidth provided at every frequency.

Features:

• Plastic
• Transom Mount CHIRP Transducer with Temp
• Low Freq: 42-65 kHz
• High Freq: 150-250 kHz

Furuno Trackball Assembly f/VX2

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MB1100

The MB1100 is a matching box for Furuno LCD sounders. It is used to connect a dual-frequency transducer to an appropriate Furuno LCD sounder. The MB1100 comes with a 10-pin connector already supplied, and so does not require the use of a separate pigtail cable assembly.