Shop by Brand: Cole Hersee

Heavy Duty Toggle Switch SPST On-Off 2 Blade

Standard or long handle. Universal application. Silver contacts. Mounting stem is nickel-plated brass 15/32" -32 thread, 15/32" (11.9mm) long, and fits panels up to 9/32" (7.1mm) except where stated otherwise. phenolic housing, with plated steel cap. Nickel-plated brass mounting hardware. Blade terminals: .250 quick connect. Screw terminals: 6-32 screws. 25A at 12V, 15A at 24V, and 10A at 36VDC.

Heavy Duty Toggle Switch SPST On-Off 2 Screw

Standard or long handle. Universal application. Silver contacts. Mounting stem is nickel-plated brass 15/32" -32 thread, 15/32" (11.9mm) long, and fits panels up to 9/32" (7.1mm) except where stated otherwise. phenolic housing, with plated steel cap. Nickel-plated brass mounting hardware. Blade terminals: .250 quick connect. Screw terminals: 6-32 screws. 25A at 12V, 15A at 24V, and 10A at 36V DC.

Heavy-Duty Long Handle Toggle Switch SPST On-Off 2 Blade

Features:

• Up: On, Down: Off
• Two blade terminals
• Long handle
• For universal application
• Silver contacts
• Mounting stem is nickel-plated brass, 15/32" -32 thread, 15/32" long (11.9mm). Fits panels up to 9/32 (7.1mm)
• Phenolic housing with plared steel cap. Nickel-plated brass hardware
• Blade terminals are.250 quick-connect. 25A at 12V, 15A at 24V, 10A at 36V DC

Heavy-Duty Toggle Switch SPST Off-(On) 2 Screw

Features:

• Up: Momentary On, Down: Off
• Two screw terminals
• For universal application
• Silver contacts

Illuminated Toggle Switch SPST On-Off 4 Screw

Standard or lighted handle – black nylon or clear plastic, 11/16" (17.5mm) long. Silver contacts. Mounting stem 15/32"-32 thread, 15/32" (11.9mm) long, fits panels up to 1/8" (31.8mm) thick. Includes mounting hardware: black metal facenut and nickel-plated hexnut. 25A at 12V DC. Terminals: .250" blade or 6-32 screw.

Inline MAXI Blade Style Fuse Holder with Cover

Supplied with two 5” leads - 6 gauge wire for up to 60A MAXI®/FK3 Fuse applications, this In-line Fuse Holder also provides a protective cover for harsh under-the-hood environments. The mounting hole also permits easy bulkhead installation.

Features:

• Fuse Style/Series: MAXI
• Fuse Type: Maxi
• Mounting Method: In-Line
• Current Rating (Continuous) in Amps: 60
• Voltage Rating (Max): 32

Intermittent Duty Reversing Solenoid - 12V DPDT

A combination of two solenoids in one package to reduce cost and maximize space savings while also providing simpler wiring. Two integral solenoids provide dynamic braking for permanent magnet motors when neither coil is energized. This intermittent duty solenoid can be used at a variety of amperages. 

Specifications:

• 75A Make/Break: 5 min On, 5 min Off
• 125A Make/Break: 30 sec On, 5 min Off
• 150A Make Break: 0.5 sec On, 5 min Off
• Circuitry: DPDT
• Contact Material: Copper
• Housing: Plastic

Lighted Rocker Switch SPDT On-Off-On 4 Blade

Sealed to IP66 for water resistance. (high pressure wash.)

Pilot Light Illumination:

• 58238 - Large lens with incandescent bulbs with brass blade terminals
• 56327 Small lens with incandescent bulbs with brass screw terminals
• 58327 Small lens with incandescent bulbs with brass blade terminals

Lighted Rocker Switch SPST On-Off 3 Blade

Sealed to IP66 for water resistance. (high pressure wash.)

Pilot Light Illumination:

• 58238 - Large lens with incandescent bulbs with brass blade terminals
• 56327 Small lens with incandescent bulbs with brass screw terminals
• 58327 Small lens with incandescent bulbs with brass blade terminals

Lighted Rocker Switch SPST On-Off 4 Blade

Sealed to IP66 for water resistance. (High pressure wash.)

Pilot Light Illumination

• 58238 - Large lens with incandescent bulbs with brass blade terminals
• 56327 Small lens with incandescent bulbs with brass screw terminals
• 58327 Small lens with incandescent bulbs with brass blade terminals

Lighted Tip Toggle Switch SPDT On-Off-On 5 Blade

Independent illumination switches can be wired for dependent operation. Tip of handle is illuminated red in the On position, clear in the Off position. Tip of handle is illuminatedRed in the On position, illuminated Clear in the Off position. Silver contacts. 15/32" -32 thread mounting stem. Nickel-plated brass hexnut. Black plastic handle, housing and facenut. Keyway in the down position. Blade terminals. 25A at 12V DC. Plastic facenut can be replaced with black metal facenut 83252.

Lighted Tip Toggle Switch SPST On-Off 4 Blade

Independent illumination switches can be wired for dependent operation. Tip of handle is illuminated red in the On position, clear in the Off position. Tip of handle is illuminatedRed in the On position, illuminated Clear in the Off position. Silver contacts. 15/32" -32 thread mounting stem. Nickel-plated brass hexnut. Black plastic handle, housing and facenut. Keyway in the down position. Blade terminals. 25A at 12V DC. Plastic facenut can be replaced with black metal facenut 83252.

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Marine Cut-Off Switch & Lanyard

Marine Cut-Off Switch and Lanyard shut off the engine if the operator falls overboard preventing a runaway boat situation.

Features:

• Pole and Throw: SPST
• Engineered to high standards
• High-grade design delivers extended lifespan
• Made with premium materials
• IP66 weather-resistant conforms with SAE J1455
• The coil cord extends to 4'3" (1.3 Meters)
• Additional lanyards are available by ordering part number M-598-BP

MEGA Flex Series - 32V Bolt Down Fuse Holder for Fuses Up To 500 Amps

The MEGA Flex Series 32V Bolt-Down Fuse Holder makes it simple to install high-amp fusing thanks to its flexible cover. The UL 94 V-0 rated cover features 6 different positions for cable entry, plus its flexibility accommodates large wire sizes and ring terminal stack up. Designed for MEGA fuses up to 500 amps, this bolt-down fuse holder also has a dovetail feature on the sides that allows you to connect multiple MEGA Flex Series fuse holders to create a fused high-power distribution block. This fuse holder (02981028-BP) includes stainless steel M8 studs, hex nuts, and split washers.

Features:

• Blister packaging promotes the easy retail display
• Compatible with MEGA high-current bolt-down fuses up to 500 amps
• Black or red flexible cover allows cable entry at 6 different locations, simplifying installation and accommodating large wire sizes and ring terminal stack up
• The dovetailing feature lets you connect multiple MEGA Flex Series fuse holders together to create a fused high-power distribution block (busbars for multi-fuse applications are sold separately)
• Slots molded into the base enable secure tie-wrap mounting
• Bolt-down fuse holder base features an M6 mounting hole and an M6 slot measuring 6mm long
• Includes stainless steel M8 studs, hex nuts, and split washers
• The flexible cover has a UL 94 V-0 flammability rating

Applications:

• Battery and Alternator Connections
  • High-Current Circuit Protection
  • Electric Construction Equipment

*Fuses not included

Metal Body Battery Disconnect Switch SPST - 6-12V

2484 Series Battery Disconnect Switches are 36V Single Pole, Single Throw (SPST) manual disconnect switches that can be used to disconnect the battery from the vehicle electrical system. Disconnecting the battery from the electrical system prevents potential thermal events and ensures the system shuts down during maintenance or emergency. Battery disconnect switches also prevent parasitic loads from draining the battery during inactivity.

Features:

• Rugged steel case
• Silver-plated contacts for high conductivity and low contact resistance
• Removable Hencol key for security
• The anti-rotation locator pin option enables ease of mounting
• O-ring and gasket sealing options

Specifications:

• Current Rating (Continuous) in Amps: 40
• Current Rating (Inrush) in Amps: 250
• Voltage Rating (Max): 6
• Circuitry: SPST
• Actuator: Diecast Lever
• Contact Material: Copper
• Housing: Plated Steel
• Mounting Stem: Brass 3/4 - 16 thread 23/32 long fits panel through 3/16 thick

MIDI 498 Series - 32V Bolt Down Fuse Holder for Fuses Up To 200 Amps

Thanks to interlocking pins on its sides, the MIDI 498 Series 32V Bolt-Down High-Current Fuse Holder can be used as a single automotive fuse holder or combined with additional fuse holders to create a multi-fuse block. Compatible with MIDI bolt-down fuses (sold separately) up to 200 amps, the high-amp fuse holder comes with a protective thermoplastic cover that can be tethered to the base. This model of the MIDI 498 Series fuse holder (04980903-BP) includes a base with mounting tabs and M6 holes and a protective cover with cable openings at the ends. Split washers and hex nuts are included to install a fuse on the M5 threaded studs simply.

Features:

• Blister packaging promotes the easy retail display
• Base style 2 with mounting brackets and M6 holes is designed for outboard mounting
• M5 threaded studs, split washers, and hex nuts for simple fuse installation
• Protective cover openings at the ends accommodate heavy-duty cables

Applications:

• High-Current Circuit Protection

*Fuses not included

MIDI Flex Series - 32V Bolt Down Fuse Holder for Fuses Up To 200 Amps

Thanks to its flexible cover, the MIDI Flex Series 32V Bolt-Down Fuse Holder makes it simple to install up to a 200A MIDI fuse. Its exterior features 6 positions for cable entry and accommodates large wire sizes and ring terminal stack-up. This bolt-down fuse holder has a dovetail side feature that lets you connect multiple MIDI Flex Series fuse holders. Busbars for multi-fuse applications are available (sold separately), so you can create a fused automotive power distribution block. MIDI Flex Series fuse holders can also be combined with MEGA Flex Series fuse holders (sold separately) for a high and low-amperage solution.

Features:

• Carded blister packaging for simple retail display
• Compatible with MIDI bolt-down fuses up to 200A (sold separately)
• The flexible cover allows cable entry at 6 different locations, simplifying installation and accommodating large wire sizes and ring terminal stack up
• The dovetail feature lets you connect multiple Flex Series fuse holders together to create a fused power distribution block
• Slots molded into the base enable secure tie-wrap mounting
• Zinc-plated steel M5 studs and hex nuts
• Bolt-down fuse holder base features M4 mounting holes
• UL 94 V-0 flammability rating

Applications:

• Battery and alternator Connections

*Fuses not included

Narrow Body Curved Rocker Switch SPST On-Off 3 Blade

Features:

• 10 A @ 12 VDC
• Circuitry: SPST
• Positions: Two Positions
• Up: On – Down: Off
• Terminals: 3 Blade

Push Button Switch SPST Off-On 2 Screw with Screw-On Cap

Normally Off switches (Normally Open) are push to operate, spring return to Off, and have cylindrical diecast body with 5/8”-32 mounting stem.

Specifications:

• Housing: Cylindrical diecast body
• Circuitry: Off-On, Normally Off. On with buttom depressed, spring return to Off
• Rating: 35A at 12VDC, 20A at 24VDC
• Contacts: Silver
• Button & Facenut: Chrome-plated except where noted

Push Pull Switch SPDT Off-On1-On2 4 Screw

Features:

• Voltage: 6-36VDC
• Rating: 10A at 12VDC
• Circuitry: SPDT
• Type: Off-On1-On2
• Normal Position: Off
• Actuator Knob: Chrome Brass (10-32 Thread)
• Terminals: 4 Screw
• Housing: Brass
• Material: Brass
• Size: 3/8"-32 1-1/4" Long

Push Pull Switch SPST Off-On 2 Screw

Push Pull, SPST Normally Off, screw terminals, brass case

Push Pull Switch SPST Off-On 2 Wire

Push Pull, SPST Normally Off, PVC-coated brass case

Push Pull Switch SPST On-Off 3 Screw

Features:

• Voltage: 6-36VDC
• Rating: 10A at 12VDC
• Circuitry: SPST
• Type: On-Off
• Normal Position: Off
• Actuator Knob: Chrome Brass
• Terminals: 3 Screw
• Housing: Brass
• Material: Brass
• Size: 3/8"-32 1-1/4" Long

Push Pull Switch SPST On-On-Off 3 Screw

Features:

• Voltage: 6-36VDC
• Rating: 10A at 12VDC
• Circuitry: SPST
• Type: On-On-Off
• Normal Position: Off
• Actuator Knob: Chrome Brass (10-32 Thread)
• Terminals: 3 Screw
• Housing: Brass
• Material: Brass
• Size: 3/8"-32 1-1/4" Long

Push-Pull Switch DPTT 3-Position Off-On-On

Features:

• Two-circuit push-pull switch, normally off (pull for ON)
• Allows (2) circuits to be operated independently with one switch
• Heavy-duty corrosion-resistant construction
• Supplied with mounting hardware: brass face nut, washer, and hex nut
• Installs in panels up to 1" thick
• 3-Position
• Off-On-On
• Push Button

Rocker Switch Bezel Kit 2 Ends & 1 Center

For snap-in mounting of any regular size switch such as 56027, 58031, 58332, 58311, and 58312 series. Bezels can be arranged in a parallel array of any length. Bezels themselves can snap into a panel, or be mounted with the Bracket Mounting Kit. Height 1.90" (48.3mm). Two units are 2.37"W x 2.30"H (60.2 x 58.4mm). Mounting hole in panel should be 2.02"W x 1.90"H (51.3 x 48.3mm) for two bezels. Add 1.03"W (26.2mm) for each additional unit.

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Rocker Switch DPST On-Off 4 Blade

These general-purpose switches are ideal for marine applications but work in all kinds of applications. 

• 20A at 12Vdc & 15A at 24VDC
• They are weather-resistant with contact areas sealed to IP66 (high pressure wash-resistant)
• Snaps into a standard rectangular mounting hole 1.450" x 0.830" (36.8 x 21.1mm) in panels from 0.09" to 0.19" thick (2.4 x 4.7mm)
• Plastic housing, bezel and actuator
• Silver contacts
• Brass blade terminals

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Rocker Switch Mounting Kit

For snap-in mounting of any regular size switch such as 56027, 58031, 58332, 58311, and 58312 series. Bezels can be arranged in a parallel array of any length. Bezels themselves can snap into a panel, or be mounted with the Bracket Mounting Kit. Height 1.90" (48.3mm). Two units are 2.37"W x 2.30"H (60.2 x 58.4mm). Mounting hole in panel should be 2.02"W x 1.90"H (51.3 x 48.3mm) for two bezels. Add 1.03"W (26.2mm) for each additional unit.

Rocker Switch SPDT On-Off-On 3 Blade

These general-purpose switches are ideal for marine applications but work in all kinds of applications.

• 20A at 12Vdc & 15A at 24VDC
• They are weather-resistant with contact areas sealed to IP66 (high pressure wash-resistant)
• Snaps into a standard rectangular mounting hole 1.450" x 0.830" (36.8 x 21.1mm) in panels from 0.09" to 0.19" thick (2.4 x 4.7mm)
• Plastic housing, bezel and actuator
• Silver contacts
• Brass blade terminals

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Rocker Switch SPST (On)-Off 2 Blade

These general-purpose switches are ideal for marine applications but work in all kinds of applications. 

• 20A at 12Vdc & 15A at 24Vdc
• They are weather-resistant with contact areas sealed to IP66 (high pressure wash-resistant).
• Snaps into a standard rectangular mounting hole 1.450" x 0.830" (36.8 x 21.1mm) in panels from 0.09" to 0.19" thick (2.4 x 4.7mm).
• Plastic housing, bezel and actuator
• Silver contacts
• Brass blade terminals

Rocker Switch SPST On-Off 2 Blade

These general-purpose switches are ideal for marine applications but work in all kinds of applications. 

• 20A at 12Vdc & 15A at 24VDC
• They are weather-resistant with contact areas sealed to IP66 (high pressure wash-resistant)
• Snaps into a standard rectangular mounting hole 1.450" x 0.830" (36.8 x 21.1mm) in panels from 0.09" to 0.19" thick (2.4 x 4.7mm)
• Plastic housing, bezel and actuator
• Silver contacts
• Brass blade terminals

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.