Shop by Brand: CRUX

The CRUX SWRHN-62B is a radio replacement interface for select Honda vehicles. It facilitates the integration of an after-market radio to enable retention of certain factory features when replacing a factory-installed radio and is also pre-programmed for retention of steering wheel controls.
General Features:

Aftermarket Car Stereo Installation Interface
For select 2006-Up Honda Vehicles
Retains factory features while functioning with an aftermarket radio
Pre-programmed to retain Steering Wheel Controls
Retains Factory Auxiliary Input
Includes Antenna Adapter

Compatible Vehicles

Honda
2006 - 2011 Civic/Si
2006 - 2011 CRV
2010 - 2013 Insight (Non-Nav)
2008 - 2011 Odyssey

Compatibility Notes:


Does not support amplified systems

Does not support Rear-Seat Entertainment

Does not retain Factory Navigation systems

The CRUX SWRGM-49 is a premium interface for select General Motors LAN 29-Bit Vehicles. It facilitates the integration of an after-market radio to fully retain factory features in GM LAN 29-Bit vehicles with Bose Amplified and Non-Amplified Systems. This enhanced interface is also pre-programmed for retention of steering wheel controls.

General Features:

Retains factory features in select GM LAN 29 Bit vehicles while functioning with an aftermarket radio.
Pre-programmed to retain factory Steering Wheel Controls.
iPhone Voice Recognition (VR) feature from SWC on select Kenwood, Pioneer, Alpine and JVC radios.
Supports Pick Up/End Call, Pick up and Toggle between 1st and 2nd incoming call, AVRCP Track, Seek.
Supports Bose, non-Bose and Y-91 audio systems.
Retains chime functions.
Retains factory back-up camera (if present).
EIA color coded wiring for easy installation.
Compatible Vehicles

Buick
2008 - 2015 Enclave
2006 - 2011 Lucerne
Cadillac
2006 - 2011 DTS
2007 - 2014 Escalade
2007 - 2009 SRX
Chevrolet
2007 - 2013 Avalanche*
2007 - 2008 Equinox
2008 - 2013 Express Van
2006 - 2013 Impala/Impala SS
2006 - 2007 Monte Carlo
2007 - 2013 Silverado 1500-3500*
2007 - 2014 Suburban*
2007 - 2014 Tahoe*
2009 - 2015 Traverse
GMC
2007 - 2015 Acadia*
2008 - 2013 Savana
2007 - 2013 Sierra 1500-3500*
2007 - 2014 Yukon*
Hummer
2008 - 2009 H2
Pontiac
2007 - 2009 Torrent
Saturn
2007 - 2010 Outlook
2008 - 2009 Vue
Suzuki
2007 - 2008 XL7

Compatibility Notes:


*Not compatible with 2012-up SUVs/trucks that are equipped with factory-installed Navigation radios.

Does not support Onstar

For select 2006-2015 GM LAN 29 Bit Vehicles
Double DIN Install Dash Kit
Includes stereo replacement and steering wheel control interface
Supports Bose, Non-Bose and Y-91 Audio Systems
Retains factory chimes
Retains factory front and back park assist system
Includes all required wiring harnesses
Designed and manufactured with precision tolerances, resulting in a gapless fit between the dash and the kit
High-grade ABS plastic construction
Factory style texture
Color: Black

Compatibility List:

Buick:
2008-2015 Enclave
2006-2011 Lucerne
Cadillac:
2006-2011 DTS
2007-2014 Escalade
2007-2009 SRX
Chevrolet:
2007-2013 Avalanche 1
2007-2008 Equinox
2008-2013 Express Van 2
2006-2013 Impala / Impala SS
2006-2013 Impala SS
2006-2007 Monte Carlo
2007-2013 Silverado 1500 1
2007-2013 Silverado 2500 1
2007-2013 Silverado 3500 1
2007-2014 Suburban 1
2007-2014 Tahoe 1
2009-2015 Traverse
GMC:
2007-2015 Acadia
2008-2013 Savana 2
2007-2013 Sierra 1500 1
2007-2013 Sierra 2500 1
2007-2013 Sierra 3500 1
2007-2014 Yukon 1
Hummer:
2008-2009 H2
Pontiac:
2007-2009 Torrent
Saturn:
2007-2010 Outlook
2008-2009 Vue
Suzuki:
2007-2008 XL7

Notes:

Does not Retain OnStar

1 NOT compatible with select 2012-Up SUVs and Trucks that are equipped with Factory Installed Navigation Radios.

2 NOT compatible with Express and Savana Vans that are powered by a Diesel engine.

General Motors Radio Replacement Module
Aftermarket Car Stereo Installation Interface
For select General Motors LAN 29-Bit Vehicles (with chime, without OnStar)
Interface Retains the following factory features:

Bose amplified and Non-Bose audio systems (excluding Y91 or Z75 Bose)
Y91 or Z75 Code found in the service parts sticker located in the glove box
Safety and warning Chimes
Folding Mirrors (including reverse)
Park Assist (Front / Rear)
Heated Seats
Turn Signal (Clicker), without additional relay
Power Running Boards (if factory equipped)

Compatible Vehicles

Buick
2008 - 2015 Enclave
2006 - 2011 Lucerne
Cadillac
2006 - 2011 DTS
2007 - 2014 Escalade
2007 - 2009 SRX
Chevrolet
2007 - 2013 Avalanche*
2007 - 2008 Equinox
2008 - 2013 Express**
2006 - 2013 Impala
2006 - 2007 Monte Carlo
2007 - 2013 Silverado 1500-3500*
2007 - 2014 Suburban*
2007 - 2014 Tahoe*
2009 - 2015 Traverse
GMC
2007 - 2015 Acadia
2008 - 2013 Savana
2007 - 2013 Sierra 1500-3500*
2007 - 13 Yukon*
Hummer
2008 - 2009 H2
Pontiac
2007 - 2009 Torrent
Saturn
2007 - 2010 Outlook
2008 - 2009 Vue
Suzuki
2007 - 2008 XL7

Vehicle Compability


*Not compatible with 2012-up SUVs/trucks that are equipped with factory-installed Navigation radios.

**Not compatble with diesel-powered Express and Savana vans.

Does not support OnStar

The CRUX SWRNS-63U is a radio replacement interface for select Nissan vehicles. It facilitates the integration of an after-market radio to enable retention of certain factory features when replacing a factory-installed radio and is also pre-programmed for retention of steering wheel controls.
General Features:

Aftermarket Car Stereo Installation Interface
For select 2007-2012 Nissan Vehicles
Retains factory features in select Nissan vehicles while functioning with an aftermarket radio
Pre-programmed to retain Steering Wheel Controls
Includes Antenna Adapter

Compatible Vehicles

Nissan
2009 - 2012 370z
2007 - 2012 Altima
2008 - 2012 Armada
2009 - 2012 Cube
2012 - 2012 Frontier
2007 - 2012 Maxima
2009 - 2012 Murano
2012 - 2012 NV1500
2012 - 2012 NV2500HD
2008 - 2012 Pathfinder
2011 - 2012 Quest
2008 - 2012 Rogue
2007 - 2012 Sentra
2007 - 2012 Versa

Compatibility Notes:


Does not support amplified systems

The CRUX SWRHK-65E is a radio replacement interface for select Hyundai and Kia vehicles. It facilitates the integration of an after-market radio to enable retention of certain factory features when replacing a factory-installed radio and is also pre-programmed for retention of steering wheel controls.
General Features:

Aftermarket Car Stereo Installation Interface
For select 2010-2014 Hyundai/Kia Vehicles
Retains factory features while functioning with an aftermarket radio
Pre-programmed to retain Steering Wheel Controls
Retains Factory Auxiliary Input
Includes Antenna Adapter

Compatible Vehicles

Hyundai
2010 - 2013 Tucson
2012 - 2013 Veloster
Kia
Late 2011 - 2014 Optima
Late 2011 - 2014 Rio
2011 - 2014 Sportage

The CRUX SOOCR-26 facilitates the installation of after-market radios in select Chrysler, Dodge and Jeep vehicles while retaining certain factory features and maintaining functionality of the factory amplifier, if present.
General Features:

Radio Replacement Wiring Harness and Interface
Install an aftermarket radio for select Chrysler, Dodge & Jeep Vehicles
Supports amplified and non-amplified systems
Works with all Chrysler CAN-Bus vehicles
Reverse Trigger
Vehicle Speed Sense (VSS)
Illumination Output

Vehicle Compatibility:

Chrysler
2011 - 2014 200
2005 - 2010 300
2007 - 2009 Aspen
2006 - 2010 PT Cruiser
2007 - 2010 Sebring
2008 - 2015 Town & Country
Dodge
2007 - 2013 Avenger
2007 - 2012 Caliber
2008 - 2014 Challenger
2006 - 2010 Charger
2013 Charger
2005 - 2011 Dakota
2004 - 2013 Durango
2009 - 2015 Grand Caravan
2009 - 2010 Journey
2013 Journey
2005 - 2008 Magnum
2007 - 2011 Nitro
2006 - 2012 Ram
Jeep
2006 - 2010 Commander
2007 - 2015 Compass
2005 - 2013 Grand Cherokee
2008 - 2012 Liberty
2007 - 2015 Patriot
2007 - 2015 Wrangler
Mitsubishi
2006 - 2009 Raider
Volkswagen
2009 - 2013 Routan

Compatibility Notes:


Does not retain Uconnect

Crux Radio Replacement with Handle Bar Radio Control Retention for Harley Davidson 1998-2013

The CRUX SWRCR-59 is a radio replacement interface for select Chrysler, Dodge & Jeep vehicles 2004-2015. It facilitates the integration of an aftermarket radio to retain factory features in select models. This enhanced interface is also pre-programmed for retention of steering wheel controls.
General Features:

Aftermarket Car Stereo Installation Interface
For select 2004-2013 Dodge & Jeep Vehicles
Retains select factory features when installing an aftermarket radio
Retains factory-installed Amplifier
Retains Steering Wheel Controls via built-in, pre-programmed interface
With navigation outputs (Reverse gear , Illumination and Speed signal)
Provides Accessory Power ( 2A MAX )

Compatible Vehicles

Chrysler
2011 - 2014 200
2005 - 2010 300
2007 - 2009 Aspen
2006 - 2010 PT Cruiser
2007 - 2010 Sebring
2008 - 2015 Town & Country
Dodge
2007 - 2013 Avenger
2007 - 2012 Caliber
2008 - 2014 Challenger
2006 - 2010 Charger
2013 - 2013 Charger
2005 - 2011 Dakota
2004 - 2013 Durango
2009 - 2015 Grand Caravan
2009 - 2010 Journey
2013 - 2013 Journey
2005 - 2008 Magnum
2007 - 2011 Nitro
2006 - 2012 Ram
Jeep
2006 - 2010 Commander
2007 - 2015 Compass
2005 - 2013 Grand Cherokee
2008 - 2012 Liberty
2007 - 2015 Patriot
2007 - 2015 Wrangler
Mitsubishi
2006 - 2009 Raider
Volkswagen
2009 - 2013 Routan

Compatibility Notes:


Does not retain Uconnect

The CRUX SWRTY-61J is a radio replacement interface for select Lexus, Scion and Toyota vehicles. It facilitates the integration of an after-market radio to enable retention of certain factory features when replacing a factory-installed radio. It retains factory installed JBL Amplifiers and is also pre-programmed for retention of steering wheel controls.

Retains factory features in select Lexus, Scion and Toyota vehicles with JBL Harman-Becker Digital-Synthesis Amplifier, including JBL (Pioneer-made) amplifiers while functioning with an aftermarket radio.
Pre-programmed to retain factory Steering Wheel Controls.
iPhone Voice Recognition (VR) feature from SWC on select Kenwood, Pioneer, Alpine and JVC radios.
Variable audio gain adjustment to level match the aftermarket radio and factory amplifier.
Retains OEM 3.5mm Auxiliary Audio Input.
Supports BT-HF/A2DP/AVRCP profile on select aftermarket radio models.
Supports Pick Up/End Call, Pick up and Toggle between 1st and 2nd incoming call, AVRCP Track, Seek.
EIA color coded wiring for easy installation.

Compatible Vehicles

LEXUS
2004 - 2006 ES300
2003 - 2005 IS300
2004 - 2006 LS430

SCION
2013 - 2015 FRS
2016 - 2016 iM
2012 - 2013 iQ
2005 - 2015 tC
2004 - 2007 xA
2004 - 2015 xB
2008 - 2012 xC

TOYOTA
2003 - 2016 4Runner
2005 - 2015 Avalon
2007 - 2016 Camry
2004 - 2008 Camry Solara
2009 - 2016 Corolla
2007 - 2014 FJ Cruiser
2008 - 2015 Highlander
2005 - 2012 Matrix
2004 - 2012 Prius
2004 - 2015 RAV4
2005 - 2016 Sequoia
2004 - 2016 Sienna
2005 - 2016 Tacoma
2004 - 2015 Tundra
2009 - 2015 Venza
2008 - 2011 Yaris

Supports JBL Amplifiers

The CRUX SWRTY-61N is a radio replacement interface for select Toyota vehicles.It facilitates the integration of an after-market radio to enable retention of certain factory features when replacing a factory-installed radio. This enhanced interface retains the factory rear-view (backup) camera and is also pre-programmed for retention of steering wheel controls.

Retains factory features in select Toyota vehicles while functioning with an aftermarket radio.
Pre-programmed to retain factory Steering Wheel Controls.
iPhone Voice Recognition (VR) feature from SWC on select Kenwood, Pioneer, Alpine and JVC radios.
Retains OE Rear View Camera.
Supports BT-HF/A2DP/AVRCP profile on select aftermarket radio models.
Supports Pick Up/End Call, Pick up and Toggle between 1st and 2nd incoming call, AVRCP Track, Seek.
EIA color coded wiring for easy installation.

Compatible Vehicles

Toyota
2012-Up 4Runner
2012-Up Avalon
2012-Up Camry
2012-Up Corolla
2012-Up Highlander
2012-Up RAV4
2012-Up Sequoia
2012-Up Tacoma
2012-Up Tundra
2012-Up Venza

Compatibility Notes:

*Note: Highlander vehicles without OEM Navigation radios will not retain Factory Backup Camera.

The CRUX SWRAD-55 is a radio replacement interface for select Audi vehicles. It facilitates the integration of an aftermarket radio to retain factory features with Amplified and Non-Amplified Systems. This enhanced interface is also pre-programmed for retention of steering wheel controls
General Features:

Aftermarket Car Stereo Installation Interface
For select 2001-2010 Audi Vehicles
Retains factory features with aftermarket radios
Retains factory-installed amplified systems
Retains Steering Wheel Controls via built-in, pre-programmed interface
With navigation outputs (Reverse gear , Illumination and Speed signal)
Provides Accessory Power (2A MAX)

Compatible Vehicles

Audi
2002 - 2010 A3
2001 - 2009 A4
2008 - 2010 A5
2002 - 2004 A6
2004 - 2009 S4
2009 - 2010 Q5
2002 - 2010 TT

Aftermarket Car Stereo Installation Interface and Double Din Dash Kit
For General Motors LAN 11-Bit Vehicles
Plug and Play Installation
Retains Steering Wheel Controls via built in pre-programmed interface
Retains Factory Warning Chimes
Works with Non-Bose and BOSE amplified systems
Fully functional for replacing both types of 11-Bit Radios. Includes the following two harnesses with:

24-Pin Connector
14- & 16-Pin Connectors

Use 14 and 16-pin connectors for:
Chevrolet
2007 - 2010 Cobalt
2006 - 2011 HHR
2008 - 2012 Malibu
Pontiac
2007 - 2010 G5
2006 - 2010 Solstice
Saturn
2007 - 2010 Aura
2007 - 2007 Ion
2007 - 2009 Sky

Use 24-pin connector for:
Chevrolet
2005 - 2006 Cobalt
2004 - 2007 Malibu
Pontiac
2005 - 2009 G6