Pioneer Alpine & Kenwood Video Bypass
Universal Trigger Output Module Low Voltage Trigger Latch and Unlatch Output From a Pulsed Unit Double Pulse Output |
RADIO REPLACEMENT INTERFACE FOR 2005 AND UP CHRYSLER/DODGE/JEEP LSFT CANBUS EQUIPPED VEHICLES. |
Radio Replacement Interface for GM Vehicles with Class II databus and 24-pin harness. |
ALL-IN-ONE RADIO REPLACEMENT & STEERING WHEEL CONTROL INTERFACE
PRE-LOADED WITH AMPLIFIER RETENTION & NAVIGATION BASED OUTPUT SIGNALS RETAINS ALL IMPORTANT OEM SAFETY & CONVENIENCE FEATURES DATA-CONTROLLED RAP ACCESSORY OUTPUT DATA-CONTROLLED OUTPUTS |
Radio Replacement Interface for Select non-amplified 29-bit LAN GM vehicles with 14-pin & 16-pin connector. |
Radio Replacement Interface for GM Vehicles with Class II databus and 32-pin ribbon harenss.
Included: (1) RadioPro3 module (1) Plug and Play vehicle connection harness (1) Instruction manual Adaptor Function: - Data controlled outputs for connection to your navigation radio; speed, reverse and E-brake status output wires -Retains factory installed amplifier (if equipped) - Data controlled RAP accessory output - Keeps vehicle data-bus intact for service - Plug-in-connection for steering wheel control module (SWI-RC or SWI-X) -Interface can be quickly updated if needed from the PAC website using a PAC-UP USB adapter - Adjustable chime volume: 4 levels, and off |
PAC Radio Replacement Interface for 2005-10 Dodge Chrysler Jeep
|
Radio Replacement Interface With Built In Pre-Programmed Steering Wheel Control Retention and Navigation Outputs for 2004 up Chrysler, Dodge, Jeep. |
PAC Radio Replacement Interface for 2008-15 Dodge Chrysler
|
Built in pre-programmed SWC retention |
For 1995 - 2006 Nissan vehicles with Bose audio system
Replace the factory-installed Bose radio in select Nissan and Infiniti vehicles and retain the function of the factory amplified audio system without cutting the factory wiring. Includes OEM-1 interface and a vehicle specific harness. Product Features Plug-and-play installation retains factory wiring integrity Transformer isolated for optimal sound and performance Maintains correct phasing Retains the function of the factory-installed amplified sound system |
|
PAC Radio Replacement Interface for non-amplified 29-Bit GM LAN v2 vehicles with 20-Pin and 16-Pin
Retains all safety warning chimes when the factory radio is replaced Provides 10-minute RAP accessory output Applications: Make Model Year Category Product Chevrolet Colorado 2015 Radio Replacement LCGM51 Chevrolet Silverado 2014 Radio Replacement LCGM51 Chevrolet Silverado 2015 Radio Replacement LCGM51 Chevrolet Suburban 2015 Radio Replacement LCGM51 Chevrolet Tahoe 2015 Radio Replacement LCGM51 GMC Canyon 2015 Radio Replacement LCGM51 GMC Sierra 2014 Radio Replacement LCGM51 GMC Sierra 2015 Radio Replacement LCGM51 GMC Yukon 2015 Radio Replacement LCGM51 |
Radio Replacement Interface for Select non-amplified Class II GM vehicles with 24-pin connector. |
Provides navigation trigger wires and timed accessory output for replacing the factory radio and retains the factory installed amplified audio system. |
APPLICATIONS: |
|
Combines C2R-GM24 & SWI-RC Interface |
Product Features
Retains steering wheel controls (SWC) Retains JBL and JBL Synthesis amplified audio systems Real-time and programmable speaker fade function Retains 3.5mm auxiliary audio input (RCA to 3.5mm adapter may be required depending on aftermarket radios aux input connection) Includes wired outputs for navigation radio installation USB and back-up camera retention with additional harnesses (USB-TY1, USB-TY2, CAM-TY11, CAM-TY12) Includes two sets of vehicle connectors and necessary firmware for compatibility with broader range of vehicles On-board 10 amp ACC 12 Volt output Direct USB in-field updateable Compatibility Notes Toyota Avalon: Only compatible in vehicles equipped with a JBL system Not compatible in Lexus vehicles equipped with factory navigation Does not retain Rear Seat Entertainment |
ALL-IN-ONE RADIO REPLACEMENT & STEERING WHEEL CONTROL INTERFACE
PRE-LOADED WITH AMPLIFIER RETENTION & NAVIGATION BASED OUTPUT SIGNALS RETAINS ALL IMPORTANT OEM SAFETY & CONVENIENCE FEATURES DATA-CONTROLLED RAP ACCESSORY OUTPUT DATA-CONTROLLED OUTPUTS |
|
Tone Generator and Speaker Polarity Tester |
The SWI-CP5 interface allows the retention of steering wheel controls (SWC), rear seat controls (RSC) and retained accessory power (RAP) whenever replacing a factory radio.
Use of this interface also allows you to program two radio functions to each SWC button by using short press/long press dual command functionality. The SWI-CP5 works in vehicles with either data or analog SWC. Product Features Configure using the Android Application, Apple Application, PC Application, USB flash drive or manually. Compatible in vehicles equipped with LAN, LIN, CAN, Class II, Analog or Serial Data SWC. Easily configurable using either a PC, smartphone or tablet. Create and save custom vehicle configuration files for later use. Ability to assign two radio functions to one SWC button. Audible feedback for programming confirmation. Highly visible tricolor LED to keep the user informed of the modules status. Retains memory even if power is lost. Equipped with a manual learning function for compatibility with unlisted analog vehicles. |
OEM USB port retention cable forr GM 2010 & Newer
Retains the use of the OEM USB port when installing an aftermarket radio. This cable is the missing link between your OEM dash-mounted USB port and your new aftermarket radio's USB port. |
|
USE C2RFRD1 WHEN REPLACING THE FACTORY RADIO WITH AN AFTERMARKET |
2006-07 GM LAN 11 BIT VEHICLES WITHOUT ONSTAR OR NOT RETAINING ONSTAR. |
|
USE - DASH MOUNTED AMPLIFIER LEVEL CONTROL FOR VOLUME ADJUSTMENT |
PROVIDES A TURN-ON 12 VOLT TRIGGER TO TURN ON AMPLIFIERS OR OPERATE |
Roadkill Expert Series Sound Damping Material
Bulk Pack is enough material for most average sized vehicles Perfect for full vehicle protection Overall improved sound quality Increased amplifier output Easy cut and apply installation Self adhesive No surface preparation required for a solid installation High temperature resistance up to 400° F Super adhesive and conformability provides maximum surface contact Unique adhesive/damping composition results in unmatched adhesion that increases over time Weight per sq. ft.: 0.6 lbs Material thickness: 0.08"e; Aluminum Layer: 15 mil Total Square Feet: 36 sq. ft. Package contains 9 sheets (18"e; x 32"e;) |
Roadkill Expert Series Sound Damping Material
Universal Pack is great for most average sized applications Overall improved sound quality Increased amplifier output Easy cut and apply installation Self adhesive No surface preparation required for a solid installation High temperature resistance up to 400° F Super adhesive and conformability provides maximum surface contact Unique adhesive/damping composition results in unmatched adhesion that increases over time Weight per sq. ft.: 0.6 lbs Material thickness: 0.08"e; Aluminum Layer: 15 mil Total Square Feet: 4 sq. ft. Package contains 2 sheets (12"e; x 24"e;) |
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |