Shop by Brand: Wilson Electronics

N-Connector crimping tool works with both 50 Ohm LMR400 Plenum and 50 Ohm Wilson-400 Coax cable (not for use with 75 Ohm RG11) This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

N Female - N Female Barrel Connector - Used to Connect (2) LMR400 Coax w/ Male Adaptors This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

N Male 50 OHM Ring-Flare Connector for 1/2 inch Plenum Cable (Quantity 10) This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

Wilson Electronics 971109 N Male Crimp Connector for WIL400 Cable This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

N Male - N Male Connector This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

Boost 698 - 960 & 1710 - 2700 MHz cellular frequencies. 50 Ohm 7.5 Inch 4G Omni Building Antenna for Cell Phone Signal Boosters with N-Female Connector. Includes Multi-mount Bracket for mast or wall. Outdoor rated waterproof. 2 year warranty. This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

The Overland Mounting Bracket and Hardware offers great flexibility allowing you to install your antenna in more ways on your truck van or SUV. This versatile mount includes hardware for T-slot pole and fixed mounting. The articulating mount is made to fold allowing you to store the antenna out of the way when not in use. This is a unique feature in the off-roading and overlanding space. Before pulling your vehicle into the garage or driving through a car wash this mounting bracket allows you to quickly fold your antenna down. Leave it down for daily driving when you don t need your booster. When you re heading into the backcountry simply flip it back up to improve your cell signal. This mount is compatible with any version of the OTR RV or Overland antennas as well as CB antennas. This product is included in the Drive Reach Overland signal booster kit. It is also offered as a standalone product for replacing an existing antenna mount or adding more flexibility to a vehicle booster kit. While this product is included in the Drive Reach Overland signal booster kit it is also offered as a standalone product. Allows antenna to be folded down when not in use Allows full 180-degree adjustability from side to side Includes T-slot pole and fixed mounting hardware Can replace existing antenna mount or be added to a booster kit

Wilson Electronics 311228 Pro WideBand Direction Antenna - The High-Gain LPDA Antenna is made exclusively for commercial-grade WilsonPro amplifiers; regarded for its rugged all-weather construction high performance and tilt-swivel bracket. Versatile and powerful it works on all worldwide cellular bands for voice and data; including LTE CDMA GSM UMTS and AWS. Designed to fit 1.5"- 2" pipe/mast on a building?s exterior the High-Gain LPDA Antenna is easily adjusted to point in the direction of nearby cell towers. The High-Gain LPDA Antenna has an N-Female connector comes with mounting hardware and works with WilsonPro amplifiers. It features a 2-year manufacturer?s warranty. Key Features: 44" directional waterproof antenna for all-weather use Optimizes signal by pointing directly at nearby cell towers Uses as tilt-swivel bracket for easy yet precise adjustment Works on LTE CDMA GSM UMTS and AWS cell bands Designed for building exterior installation; direct at cell tower for best signal Simple install kit with tilt/swivel bracket for 1.5" to 2" diameter pipe/mas High gain antenna for WilsonPro cellular repeater/boosters. This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

EN Destination RV Telescoping Pole and Mount This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

Yagi Antenna 800MHz Directional w/ N Female Connector This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

Single Antenna Expansion Kit (Includes: 311135 - Wall Mount Panel Antenna 700-2700 MHz 50 Ohm Vertically Polarized 859957 - Splitter 2 Way -3 dB 700-2800 MHz w/N Female Connectors 952360 - 60 ft. Black LMR400 Cable w/ N-Male to N-Male Connector 952302 - 2 ft. Wilson-400 Ultra Low Loss Coax Cable) This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

Packaged N Male Connector (no solder) for 400 Cable: Quantity 10 Bagged This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

Wilson Electronics 859980 Three way 700-2300 MHz splitter w N Female Connectors This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

Triple Antenna Expansion Kit (Includes: 311135 - Wall Mount Panel Antenna 700-2700 MHz 50 Ohm Vertically Polarized (qty. 3) 859981 - Splitter 4 Way -6 dB 700-2700MHz w/N Female Connectors 952360 - 60 ft. Black LMR400 Cable w/ N-Male to N-Male Connector (qty. 3) 952302 - 2 ft. WILSON400 Ultra Low Loss Coax Cable) This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

Wilson Electronics Triple Cellular Antenna Expansion Kit (Includes: 311155 - Wall Mount Panel Antenna 700-2700 MHz 75 Ohm Directional (qty. 3) 859106 - 75 Ohm 4 Port 700-2700 MHz Splitter w/F Female Connectors 951150 - 50 ft. RG11 Cable with F Connectors (qty. 3) 951127 - 2 ft. RG11 Cable) This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

Wall Mount Panel Antenna 50 Ohm 600 MHz - 4000 MHz Supports 600-960 and 1425-4000Mhz Works on all worldwide cellular bands for voice and data: LTE/CDMA/GSM/UMTS/AWS High gain antenna for Wilson PRO cellular repeater Designed for building interior installation N-female connector. This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

7 dB tap; splits signal unequally between two antennas. Required to add CBand antennas/repeaters to existing system. 7 dB tap port and 1.2 dB passthru port. NFemale connectors. Frequencies 6004 000 MHz. Band 71 CBand Pro 710i compatible.D9 This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

weBoost DC/DC Power Adapter 5V/4A Fused On/Off Switch 12-24VDC w/11.5 ft Cable for the Drive Reach (470154) This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

Weboost Desktop Antenna 700-2100 MHz w/5 ft. RG174 Cable and SMA Male Connector This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

"The Home Inside Antenna (75 Ohm) is a proprietary indoor antenna made for weboost residential (75-ohm versions) cellular signal boosters; noted for its stylish fabric cover high performance and intuitive wall-mount bracket. With the included 3M Command Strips the Home Inside Directional Antenna securely mounts to interior walls in a vertical or horizontal configuration. The antenna?s neutral design aesthetic easily complements contemporary décor and features a built-in kickstand for shelf placement. This model has an F connector." This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

7 dB 2-way Tap (Wide Band) 50 Ohm (N connector) 700-2700 MHz This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

Wideband Directional Antenna 50 Ohm 600-4000MHz (supports C-Band). Supports 600-960 and 1425-4000Mhz Works on all worldwide cellular bands for voice and data: LTE/CDMA/GSM/UMTS/AWS High gain antenna for WilsonPRO cellular repeater/boosters Designed for building exterior installation direct at cell tower for best signal Rugged and waterproof for all weather operation Includes mount for 1.5-2.0 poles N-female connector. This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

WilsonPro Wideband Directional Antenna 50 Ohm 5G Band 71 617960 MHz 17102700 MHz with NFemale

Wilson 400 series 50 Ohm Plenum Coaxial Cable 500 ft Spool This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

This cable is designed for use with WilsonPro cellular repeaters. The cable has a corrugated copper outer conductor that allows the cable to be run throughout buildings without kinking. This high efficiency cable allows transmission from antennas to a repeater with low signal attenuation. The cable can be used in buildings where plenum cable is not a requirement. 500ft spool Low attenuation High efficiency signal transfer Can be terminated with inch air dielectric connectors and tools. This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

1 x N-Type Antenna - Female 1 x SMA Antenna - Female

AC/DC Building Power Supply 5V/2A w/Mini USB Jack This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

This 2way splitter 859105 is used with WilsonPro cellular repeaters to split a signal allowing 2 antennas to be run from a single cable and receive similar strength. It is required in order to add CBand antennas 311245 311243 311242 and repeaters to an existing system. Designed to be used with WilsonPro CBand products this splitter is compatible with frequencies from 600 to 4 000 MHz. This IP65 indoor and outdoor rated splitter supports CBand TMobile band 71 and is Pro 710i compatible. As a highperformance splitter it features low insertion loss and low VSWR voltage standing wave ratio. It is equipped with NFemale connectors. Replaces previous version of 2way splitter 859957. Note: for users requiring current or future CBand support CBand antennas splitters and taps must be used.

This 3way splitter 859112 is used with WilsonPro cellular repeaters to split a signal into 3 equal parts allowing 3 antennas to be run from a single cable and receive similar strength. It is required in order to add CBand antennas 311245 311243 311242 and repeaters to an existing system. Designed to be used with WilsonPro CBand products this splitter is compatible with frequencies from 600 to 4 000 MHz. This IP65 indoor and outdoor rated splitter supports CBand TMobile band 71 and is Pro 710i compatible. As a highperformance splitter it features low insertion loss and low VSWR voltage standing wave ratio. It is equipped with NFemale connectors. Replaces previous version of 3way splitter 859980. Note: for users requiring current or future CBand support CBand antennas splitters and taps must be used.

This 4way splitter 859117 is used with WilsonPro cellular repeaters to split a signal into 4 equal parts allowing 4 antennas to be run from a single cable and receive similar strength. It is required in order to add CBand antennas 311245 311243 311242 and repeaters to an existing system. Designed to be used with WilsonPro CBand products this splitter is compatible with frequencies from 600 to 4 000 MHz. This IP65 indoor and outdoor rated splitter supports CBand TMobile band 71 and is Pro 710i compatible. As a highperformance splitter it features low insertion loss and low VSWR voltage standing wave ratio. It is equipped with NFemale connectors. Replaces previous version of 4way splitter 859981. Note: for users requiring current or future CBand support CBand antennas splitters and taps must be used.