Shop by Brand: Chief Mfg.

A singlescreen ceiling mount for flat panel displays that combines Chief's exclusive Centris tilt with quick ceiling mount installation. Ceiling plate and extension column Adjustable and Fixed are required and must be ordered separately to fit your specific installation requirements Exclusive Centris Technology fingertip tilt selfadjusts to securely hold different display weights Screen angle stays set in place until you decide to readjust Postinstallation leveling with no tools necesary Fast and easy screen positioning with lockdown capability Portrait and landscape mounting capability Easily route cables through 1.5 NPT extension column Set screw security Universal models available for VESA 100 x 100 mm up to 400 x 400 mm mounting patterns MSB interface bracket can be purchased separately for nonVESA compatible screens This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

Transforms a single arm or pivot/tilt mount into a full extension product. Compatible with JWP and JWS flat panel wall mounts This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

J SERIES IN WALL ARM DUAL This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

Universal interface bracket compatible with all Chief JSeries mounts. TAA Compliant This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

Universal interface bracket compatible with all Chief JSeries mounts. TAA Compliant This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

Transforms a single arm or pivot/tilt mount into a full extension product. Compatible with JWP and JWS flat panel wall mounts This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

This accessory allows you to mount small flat panel swing arms to a single steel stud. Not compatible with the KWP or FWP All mounting hardware included 2 steel stud anchors Easily adapts to articulating and heightadjustable arms Multiple color options Compatible with FWS/KWS/FWD/KWD This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

K0 PITCH/PIVOT POLE MNT SINGLE DISP SLV This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

K0 Pitch/Pivot Pole Mnt Single Disp Blk

K0 PITCH/PIVOT WALL MNT SINGLE DISP SLV

K1 K2 DUAL MONITOR ARRAY BAR HANDLE This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

K1 K2 DUAL MONITOR ARRAY BAR SLV This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

Use the new Kontour KRA223 Dual Monitor Array accessory to upgrade an existing K1 or K2 singlearm monitor mount product to a dual monitor array. Note: only to be used with K1C120 K1D120 K1P120 K1S120 K1W120 K2C120 K2P120 and K2W120 products The KRA223 upgrades any K1 or K2 singlearm monitor mount product to a dual monitor array Only to be used with K1C120 K1D120 K1P120 K1S120 K1W120 K2C120 K2P120 and K2W120 products 2 9 lbs 0.9 4.1 kg per monitor weight capacity range on K1 mounts Up to 15 lbs 6.8 kg per monitor weight capacity on K2 mounts This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

Use the enhanced Kontour KRA220 K1 K2 Extension Arm to provide an additional 6.5 165 mm of reach for installations requiring additional rangeofmotion. Great for use on dualarm mounts to provide improved pushback of the monitors to free additional work surface real estate while also providing additional extension for deeper work surfaces. Note: use of the KRA220 accessory reduces the total weight capacity of the mount by 15 lbs 6.8 kg The KRA220 Extension Arm accessory for KontourK1 and K2 products provides an additional 6.5 165 mm of reach for installations requiring additional range of motion Use of the KRA220 Extension Arm reduces the total weight capacity of the mount it is used on by 15 lbs 6.8 kg Example: adding a KRA220 Extension Arm to a K1D120 product reduces the weight capacity of the final configuration from 25 lbs 11.3 kg to 10 lbs 4.5 kg per monitor This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

Use the enhanced Kontour KRA220 K1 K2 Extension Arm to provide an additional 6.5 165 mm of reach for installations requiring additional rangeofmotion. Great for use on dualarm mounts to provide improved pushback of the monitors to free additional work surface real estate while also providing additional extension for deeper work surfaces. Note: use of the KRA220 accessory reduces the total weight capacity of the mount by 15 lbs 6.8 kg The KRA220 Extension Arm accessory for KontourK1 and K2 products provides an additional 6.5 165 mm of reach for installations requiring additional range of motion Use of the KRA220 Extension Arm reduces the total weight capacity of the mount it is used on by 15 lbs 6.8 kg Example: adding a KRA220 Extension Arm to a K1D120 product reduces the weight capacity of the final configuration from 25 lbs 11.3 kg to 10 lbs 4.5 kg per monitor This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

Use the enhanced Kontour KRA219 K1 K2 Table Clamp Kit for installations when the gap between edgeoftable and rear wall panel is less than 1/2 12.5 mm. The KRA219 enables clamping of any K1C K1D or K2C product in applications where the gap between the back edge of table and rear wall or panel is less than 1/2 12.5 mm The standard Table Clamp provided with these products will not work in such narrowgap scenarios TAA Compliant This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

Use the enhanced Kontour KRA219 K1 K2 Table Clamp Kit for installations when the gap between edgeoftable and rear wall panel is less than 1/2 12.5 mm. The KRA219 enables clamping of any K1C K1D or K2C product in applications where the gap between the back edge of table and rear wall or panel is less than 1/2 12.5 mm The standard Table Clamp provided with these products will not work in such narrowgap scenarios TAA Compliant This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

Provides necessary weight for ideal functioning of dynamic height adjust arm with a mounted iPad. For use with Kontour dynamic height adjust arms and FSBIB or FSBI2B iPad interfaces. Adds neccessary weight for ideal functioning of dynamic height adjustable arms Works with Kontour quick connect bracket for easy connect/disconnect TAA Compliant This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

K1 CLMN MNT 2MON DUAL 2L ARMS BLK TAA This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

K1 CLMN MNT 2MON DUAL 2L ARMS SLV TAA This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

K1 CLMN MNT 3 DISP DUAL 3L ARMS SLV This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

K1 CLMN MNT 3 DISP DUAL 3L ARMS BLK This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

The enhanced KontourK1C Dynamic HeightAdjustable Column Mounts are the perfect solutions for the office healthcare facilities or home. K1C mounts provide the maximum amount of both dynamic and manual height adjustment for the ultimate ergonomic solution. And bestinclass weight capacity range makes specification simple Key enhancements have been made to Chief's patented CentrisExtreme Tilt technology for effortless fingertip monitor positioning. Kontour monitor mounts float your displays in the optimal ergonomic position above your work surface to create a more productive and comfortable work environment. Bestinclass weight capacity range of 5 to 25 lbs. makes specification simple No need to pay more for that heavy duty arm to support your Apple monitor or AllinOne Sleek solidlyconstructed forged aluminum arms in subtle silver black finishes Enhanced patented CentrisExtreme Tilt provides +75 ; 10 of effortless tilt for optimal viewing comfort whether sitting or standing Enhanced c olumn interface enables easy upgrades from single to dual or triplemonitor installations without Impacting the existing installation futureproofing your investment 20 508 mm of total height adjustment range 13 330 mm of dynamic height adjustment using smooth motion gasspring technology Additional 7 178 mm of manual height adjustment on the column Enhanced 3step installation and quickrelease monitor interface for easy mounting and maintenance with included tool storage in the updated base Easily clamps to edge of desk through standard grommet hole or through bolt hole with included k it Toolfree cable management covers for a clean professional look With high levels of recycled content a highlyrecyclable design Chief Kontourmonitor arms may contribute to valuable LEEDCI NC and EB credits Most Kontour K1 products are TAAcompliant see respective product pages for details This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

K1 CLMN MNT 4 DISP DUAL 2L ARMS WHT This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

K1 CLMN MNT 4 DISP DUAL 2L ARMS SLV This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

K1 CLMN MNT 4 DISP DUAL 2L ARMS BLK This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

K1 CLMN MNT DUAL DISP 2L ARM HARRAY BLK This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

The enhanced KontourK1C Dynamic HeightAdjustable Column Mounts are the perfect solutions for the office healthcare facilities or home. K1C mounts provide the maximum amount of both dynamic and manual height adjustment for the ultimate ergonomic solution. And bestinclass weight capacity range makes specification simple Key enhancements have been made to Chief's patented CentrisExtreme Tilt technology for effortless fingertip monitor positioning. Kontour monitor mounts float your displays in the optimal ergonomic position above your work surface to create a more productive and comfortable work environment. Bestinclass weight capacity range of 5 to 25 lbs. makes specification simple No need to pay more for that heavy duty arm to support your Apple monitor or AllinOne Sleek solidlyconstructed forged aluminum arms in subtle silver black finishes Enhanced patented CentrisExtreme Tilt provides +75 ; 10 of effortless tilt for optimal viewing comfort whether sitting or standing Enhanced c olumn interface enables easy upgrades from single to dual or triplemonitor installations without Impacting the existing installation futureproofing your investment 20 508 mm of total height adjustment range 13 330 mm of dynamic height adjustment using smooth motion gasspring technology Additional 7 178 mm of manual height adjustment on the column Enhanced 3step installation and quickrelease monitor interface for easy mounting and maintenance with included tool storage in the updated base Easily clamps to edge of desk through standard grommet hole or through bolt hole with included k it Toolfree cable management covers for a clean professional look With high levels of recycled content a highlyrecyclable design Chief Kontourmonitor arms may contribute to valuable LEEDCI NC and EB credits Most Kontour K1 products are TAAcompliant see respective product pages for details This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

K1 CLMN MNT DUAL DISPLAY 1L ARM BLK This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

K1 CLMN MNT DUAL DISPLAY 1L ARM SLV This item cannot be shipped to APO/FPO addresses. Please accept our apologies.

K1 CLMN MNT SINGLE DISPLAY 1L ARM BLK This item cannot be shipped to APO/FPO addresses. Please accept our apologies.