0/12 - 6/12 DuraTech Galvalume Adjustable Roof Flashing - 8DT-F6 0/12 - 6/12 DuraTech Galvalume Adjustable Roof Flashing - 8DT-F6
Online
$114.45 for EACH
Retail $176.42
Mfr PN: 8DT-F6
Stock: 206
Storm collar not included.
Online
$114.45 for EACH
Retail $176.42
Mfr PN: 8DT-F6
Stock: 206

00451 1G BLU2WHITE KOOL SEAL 00451 1G BLU2WHITE KOOL SEAL
Online
$33.37 for 1 EA
Retail $42.99
Mfr PN: KS0063700-16
Stock: 121
00451 1G BLU2WHITE KOOL SEAL
Online
$33.37 for 1 EA
Retail $42.99
Mfr PN: KS0063700-16
Stock: 121

1 GALLON PROFLEX ROOF SEAL 1 GALLON PROFLEX ROOF SEAL
Online
$60.37 for 1 EA
Retail $75.99
Mfr PN: GC22300
Stock: 0
This item can NOT be shipped to these states CA
PRO-FLEX ROOF SEAL Stops leaks fast Applies in any weather even on wet surfaces Repairs slate, tile & wood roofs Also metal & fiberglass roofs Repairs asphalt shingles Crystal clear, paintable Stops rusting action on metal Easy to apply and clean up 22300 1G PROFLEX ROOF SEAL SIZE:1 Gal.
Online
$60.37 for 1 EA
Retail $75.99
Mfr PN: GC22300
Stock: 0

1 GALLON WHITE ROOF COATING 1 GALLON WHITE ROOF COATING
Online
$27.04 for 1 EA
Retail $37.99
Mfr PN: 5577-100-20
Stock: 37
WHITE ELASTOMERIC ROOF COATING Tough, highly flexible, rubberized roof coating Protective barrier reflects suns heat and UV rays Helps reduce interior temperatures Apply at 50 to 75 sq. ft. per gal. per coat DO NOT allow to freeze DO NOT store in temperatures above 110 degrees 7-year warranted product resists cracking-peeling SK-7701 1G WHITE ROOF COATING SIZE:1 Gal.
Online
$27.04 for 1 EA
Retail $37.99
Mfr PN: 5577-100-20
Stock: 37

1-1/2 In. -3 In. Aluminum Flashing 1-1/2 In. -3 In. Aluminum Flashing
Online
$7.97 for 1 EA
Retail $11.99
Mfr PN: 12976
Stock: 461
ALL-FLASH(R) NO-CALK(R) ALUMINUM FLASHING Self-sealing collar slides over pipe Metal base for pitch from 0-40 degrees Non-fading, non-cracking & non-rusting bases Ring on collar tears off, allowing flashings - to seal different pipe diameters Approved for Type B installations Not for hot-mopped or built-up roofs Rated 180 deg.F continuous heat 12976 1-1/2 IN. -3 IN. ALUM FLASHING SIZE:1-1/2" to 3"
Online
$7.97 for 1 EA
Retail $11.99
Mfr PN: 12976
Stock: 461

1-1/2 In. Aluminum Roof Flashing 1-1/2 In. Aluminum Roof Flashing
Online
$8.89 for 1 EA
Retail $11.99
Mfr PN: 12923
Stock: 13
ALUMINUM NO-CALK(R) ROOF FLASHING Rustproof .032 stamped aluminum base Allows for easy shaping of flashing Rated 180 deg.F continuous heat- Type B approved Base for pitch 0-40 deg. or up to a 10/12 roof Self-sealing collar slides over pipe Requires no caulking Apply no petroleum or paint product to flashing Not for hot-mopped or built-up roofs 12923 1-1/2 IN. ALUM ROOF FLASHING FOR PIPE SIZE:1-1/2" BASE SIZE:9" x 12-1/2"
Online
$8.89 for 1 EA
Retail $11.99
Mfr PN: 12923
Stock: 13

1-1/2" to 3" Aluminum Solar Roof Flashing 9.5 x 12.5" 1-1/2" to 3" Aluminum Solar Roof Flashing 9.5 x 12.5"
Online
$13.50 for Each
Retail $18.90
Mfr PN: G12804
Stock: 23
1-1/2" to 3"Aluminum Self-Seal Solar Roof Flashing 9.5" x 12.5" -

1-1/2" to 3"Aluminum Self-Seal Solar Roof Flashing 9.5" x 12.5" features include:

  • Designed to flash around solar mounting systems
  • Slips easily over Conduit - self-sealing to conduit surface
  • Self-sealing elastomeric tear-out collar
  • Collar will not crack, chip, peel or separate from metal base
  • Eliminates caulking - no sealing compound required
  • Absolutely leak-proof & fits most roof sizes
  • Accommodates all conduit types - ie: PVC, Aluminum, steel
  • Material: Aluminum
  • For used on shingled roof applications - Not for use on hot mopped or built up roofs
  • Order Qty of 1 = 1 Piece

 

Below is more info on our 1-1/2" to 3"Aluminum Self-Seal Solar Roof Flashing 9.5" x 12.5"

1.5" - 3" This item does not ship to APO/FPO addresses.
Online
$13.50 for Each
Retail $18.90
Mfr PN: G12804
Stock: 23

1-1/2" to 3" Galvanized Solar Roof Flashing 9.5 x 12.5" 1-1/2" to 3" Galvanized Solar Roof Flashing 9.5 x 12.5"
Online
$12.10 for Each
Retail $16.94
Mfr PN: G12803
Stock: 20
1-1/2" to 3" Galvanized Self-Seal Solar Roof Flashing 9.5" x 12.5" -

1-1/2" to 3" Galvanized Self-Seal Solar Roof Flashing 9.5" x 12.5" features include:

  • Designed to flash around solar mounting systems
  • Slips easily over Conduit - self-sealing to conduit surface
  • Self-sealing elastomeric tear-out collar
  • Collar will not crack, chip, peel or separate from metal base
  • Eliminates caulking - no sealing compound required
  • Absolutely leak-proof & fits most roof sizes
  • Accommodates all conduit types - ie: PVC, Aluminum, steel
  • Material: Galvanized
  • For used on shingled roof applications - Not for use on hot mopped or built up roofs
  • Order Qty of 1 = 1 Piece

 

Below is more info on our 1-1/2" to 3" Galvanized Self-Seal Solar Roof Flashing 9.5" x 12.5"

1/2" - 1.5" This item does not ship to APO/FPO addresses.
Online
$12.10 for Each
Retail $16.94
Mfr PN: G12803
Stock: 20

1-1/2", 2", 3" Galvanized Self-Seal Roof Flashings 1-1/2", 2", 3" Galvanized Self-Seal Roof Flashings
Online
$7.74 for Each
Retail $10.84
Mfr PN: G12209
Stock: 0
1-1/2" - 2" - 3" Galvanized Self-Seal Roof Flashings - 24 Gauge Roof Flashings eliminates the need for caulking.

1-1/2" - 2" - 3" Galvanized Self-Seal Roof Flashings features include:

  • Made of rust-proof, stamped 24 gauge galvanized steel
  • Roof flashings slip easily over DWV vent pipe - self-sealing to vent pipe surface, 40° pitch
  • Self-sealing Non-Fading elastomeric collar
  • Collar will not crack, chip, peel or separate from aluminum
  • Eliminates caulking - no sealing compound required
  • Absolutely leak-proof & fits most roof sizes
  • Accommodates all vent types - ie: plastic, copper, steel or cast iron
  • For use on shingled roofs - Not for use on hot mopped or built up roofs
  • Order Qty of 1 = 1 Piece
  • Spec Sheet

 

Below is more info on our 1-1/2" - 2" - 3" Galvanized Self-Seal Roof Flashings

Size: 1-1/2" - 2" - 3"
Length: 11"
Width: 14.5"
Case Qty: 12
Minimum Order Qty: 1 This item does not ship to APO/FPO addresses.
Online
$7.74 for Each
Retail $10.84
Mfr PN: G12209
Stock: 0

1-1/4 to 1-1/2" Galvanized Self-Seal Roof Flashing 1-1/4 to 1-1/2" Galvanized Self-Seal Roof Flashing
Online
$10.04 for Each
Retail $14.06
Mfr PN: G12201
Stock: 0
1-1/4" to 1-1/2" Galvanized Self-Seal Roof Flashings - 24 Gauge Roof Flashings eliminates the need for caulking.

1-1/4" to 1-1/2" Galvanized Self-Seal Roof Flashings features include:

  • Made of rust-proof, stamped 24 gauge galvanized steel
  • Roof flashings slip easily over DWV vent pipe - self-sealing to vent pipe surface, 40° pitch
  • Self-sealing Non-Fading elastomeric collar
  • Collar will not crack, chip, peel or separate from aluminum
  • Eliminates caulking - no sealing compound required
  • Absolutely leak-proof & fits most roof sizes
  • Accommodates all vent types - ie: plastic, copper, steel or cast iron
  • For use on shingled roofs - Not for use on hot mopped or built up roofs
  • Order Qty of 1 = 1 Piece
  • Spec Sheet

 

Below is more info on our 1-1/4" to 1-1/2" Galvanized Self-Seal Roof Flashings

Size: 1-1/4" - 1-1/2"
Length: 12.5"
Width: 9"
Case Qty: 12
Minimum Order Qty: 1 This item does not ship to APO/FPO addresses.
Online
$10.04 for Each
Retail $14.06
Mfr PN: G12201
Stock: 0

1-1/4" to 1-1/2" Rubber Flexible Roof Flashings 1-1/4" to 1-1/2" Rubber Flexible Roof Flashings
Online
$6.09 for Each
Retail $7.92
Mfr PN: G30101
Stock: 0
1-1/4" to 1-1/2" Rubber Flexible Roof Flashings - Highly durable and weatherproof Flexible Pipe Flashing.

1-1/4" to 1-1/2" Rubber Flexible Roof Flashings features include:

  • Roof flashing slides over vent pipe - accommodates pitch up to 40°
  • Commercial or Residential Applications
  • Rubber sealing collar seizes the vent pipe with a locking grip preventing leakage - Accommodates all vent types - ie: plastic, copper, steel, or cast iron
  • One piece construction molded from military grade elastomer assures long life & all weather protection - will not crack, chip or peel
  • Oil, ozone & UV resistant
  • Flexible base conforms to wide range of roof pitches, contours & surfaces
  • For use in Shingled or Clay Tile roof applications
  • Not for use in hot mopped or built up roofs
  • Order Qty of 1 = 1 Piece
  • Spec Sheet

 

Below is more info on our 1-1/4" to 1-1/2" Rubber Flexible Roof Flashings

Size: 1-1/4" - 1-1/2"
Case Qty: 12
Minimum Order Qty: 1 This item does not ship to APO/FPO addresses.
Online
$6.09 for Each
Retail $7.92
Mfr PN: G30101
Stock: 0

1-1/4" to 1-1/2" Thermoplastic Base Self Seal Roof Flashings 1-1/4" to 1-1/2" Thermoplastic Base Self Seal Roof Flashings
Online
$7.43 for Each
Retail $9.66
Mfr PN: G14101
Stock: 0
1-1/4" to 1-1/2" Thermoplastic Base Self Seal Roof Flashings - Self Sealing Flexible Flashing is weather and leak proof.

1-1/4" to 1-1/2" Thermoplastic Base Self Seal Roof Flashings features include:

  • Self-sealing, elastomeric collar attached to a sturdy rigid thermoplastic base
  • No caulking needed
  • Absolutely leak proof
  • Slips easily over pipe vent
  • Flexible flashing is self-sealing to vent pipe surface
  • Self-adjusting to all roof pitches up to 45°
  • Base will not crack or warp
  • Used in shingled roof applications
  • Not for hot mopped or built up roofs
  • Accommodates all vent pipe types - ie: plastic, copper, steel, cast iron, etc.
  • Order Qty of 1 = 1 Piece
  • Spec Sheet

 

Below is more info on our 1-1/4" to 1-1/2" Thermoplastic Base Self Seal Roof Flashings

Size: 1-1/4" - 1-1/2"
Case Qty: 12
Minimum Order Qty: 1 This item does not ship to APO/FPO addresses.
Online
$7.43 for Each
Retail $9.66
Mfr PN: G14101
Stock: 0

1-1/4" to 3" Master Boot Universal Roof Flashings 1-1/4" to 3" Master Boot Universal Roof Flashings
Online
$21.44 for Each
Retail $32.16
Mfr PN: G16252
Stock: 0
1-1/4" to 3" Master Boot Universal Roof Flashings - Versatile Universal Flashing for multiple roofing types.

1-1/4" to 3" Master Boot Universal Roof Flashings features include:

  • Universal flashing can be used with any type of corrugated roofing material, ie: asphalt, plastic, tile, rubber, metal, etc. (not for hot mopped or built-up roofs)
  • Self-sealing Step-Cone boot made of premium grade E.P.D.M., which gives it maximum resistance to weathering due to ozone & UV light
  • Flexible Aluminum Alloy rim assures universal flashing form fits and has corrosion resistance - excellent for ribbed metal roofs
  • Provides a Permanent Seal that is unaffected by expansion/contraction, vibration, ice, snow, hailstones, etc.
  • Installs in about 10 minutes
  • Excellent for wall penetrations - weathertight and airtight, inside or outside
  • Easily customized with sharp knife/scissors to accommodate a broad range of diameters
  • Slides over vent pipe & conforms to any roof pitch
  • Order Qty of 1 = 1 Piece
  • Spec Sheet

 

Below is more info on our 1-1/4" to 3" Master Boot Universal Roof Flashings

Size: 1-1/4" - 3"
Case Qty: 6
Minimum Order Qty: 1 This item does not ship to APO/FPO addresses.
Online
$21.44 for Each
Retail $32.16
Mfr PN: G16252
Stock: 0

1-GALLON WHITE ELASTOMERIC PATCH 1-GALLON WHITE ELASTOMERIC PATCH
Online
$29.16 for 1 EA
Retail $40.99
Mfr PN: SK-3901
Stock: 4
BLACK JACK ELASTOMERIC PATCH COMPOUND Flashing & patching compound Compatible with existing roof compounds Also new white latex roof coatings Easy to use bright white elastomeric sealant Resist bleed-through/asphalt staining Superior adhesion and flexibility 20 year warranty Coverage: 25 sq.ft. per gallon SK3901 1G WH ELASTOMERIC PATCH SIZE:1 Gal.
Online
$29.16 for 1 EA
Retail $40.99
Mfr PN: SK-3901
Stock: 4

1/2" to 1" Galvanized Self-Seal Roof Flashing 1/2" to 1" Galvanized Self-Seal Roof Flashing
Online
$12.88 for Each
Retail $18.04
Mfr PN: G11830
Stock: 0
1/2" to 1" Galvanized Self-Seal Roof Flashing -

1/2" to 1" Galvanized Self-Seal Roof Flashing features include:

  • Designed to flash around solar mounting systems
  • Slips easily over Conduit - self-sealing to conduit surface
  • Self-sealing elastomeric tear-out collar
  • Collar will not crack, chip, peel or separate from metal base
  • Eliminates caulking - no sealing compound required
  • Absolutely leak-proof & fits most roof sizes
  • Accommodates all conduit types - ie: PVC, Aluminum, steel
  • Material: Galvanized
  • For used on shingled roof applications - Not for use on hot mopped or built up roofs
  • Order Qty of 1 = 1 Piece

Below is more info on our 1/2" to 1" Galvanized Self-Seal Roof Flashing

1/2" - 1" This item does not ship to APO/FPO addresses.
Online
$12.88 for Each
Retail $18.04
Mfr PN: G11830
Stock: 0

1/2" to 1-1/2" Galvanized Solar Roof Flashing 9.5 x 12.5" 1/2" to 1-1/2" Galvanized Solar Roof Flashing 9.5 x 12.5"
Online
$12.12 for Each
Retail $16.98
Mfr PN: G12801
Stock: 868
1/2" to 1-1/2" Galvanized Self-Seal Solar Roof Flashing 9.5" x 12.5" -

1/2" to 1-1/2" Galvanized Self-Seal Solar Roof Flashing 9.5" x 12.5" features include:

  • Designed to flash around solar mounting systems
  • Slips easily over Conduit - self-sealing to conduit surface
  • Self-sealing elastomeric tear-out collar
  • Collar will not crack, chip, peel or separate from metal base
  • Eliminates caulking - no sealing compound required
  • Absolutely leak-proof & fits most roof sizes
  • Accommodates all conduit types - ie: PVC, Aluminum, steel
  • Material: Galvanized
  • For used on shingled roof applications - Not for use on hot mopped or built up roofs
  • Order Qty of 1 = 1 Piece

 

Below is more info on our 1/2" to 1-1/2" Galvanized Self-Seal Solar Roof Flashing 9.5" x 12.5"

1/2" - 1.5" This item does not ship to APO/FPO addresses.
Online
$12.12 for Each
Retail $16.98
Mfr PN: G12801
Stock: 868

1/2" to 1-1/2"Aluminum Solar Roof Flashing 9.5 x 12.5" 1/2" to 1-1/2"Aluminum Solar Roof Flashing 9.5 x 12.5"
Online
$13.50 for Each
Retail $18.90
Mfr PN: G12802
Stock: 20
1/2" to 1-1/2"Aluminum Self-Seal Solar Roof Flashing 9.5" x 12.5" -

1/2" to 1-1/2"Aluminum Self-Seal Solar Roof Flashing 9.5" x 12.5" features include:

  • Designed to flash around solar mounting systems
  • Slips easily over Conduit - self-sealing to conduit surface
  • Self-sealing elastomeric tear-out collar
  • Collar will not crack, chip, peel or separate from metal base
  • Eliminates caulking - no sealing compound required
  • Absolutely leak-proof & fits most roof sizes
  • Accommodates all conduit types - ie: PVC, Aluminum, steel
  • Material: Aluminum
  • For used on shingled roof applications - Not for use on hot mopped or built up roofs
  • Order Qty of 1 = 1 Piece

 

Below is more info on our 1/2" to 1-1/2"Aluminum Self-Seal Solar Roof Flashing 9.5" x 12.5"

1.5" - 3" This item does not ship to APO/FPO addresses.
Online
$13.50 for Each
Retail $18.90
Mfr PN: G12802
Stock: 20

1/2" to 2.5" Sideflash Thermoplastic Self Seal Wall Flashing 8 x 8.5" 1/2" to 2.5" Sideflash Thermoplastic Self Seal Wall Flashing 8 x 8.5"
Online
$15.92 for Each
Retail $23.88
Mfr PN: G12805
Stock: 1389

1/2" to 2-1/2" Thermoplastic Sidewall Flashing 8" x 8.5" -

1/2" to 2-1/2" Thermoplastic Sidewall Flashing 8" x 8.5" features include:

  • Designed to seal around piping penetrations through outside walls
  • Slips easily over vent pipe - self-sealing to vent pipe surface
  • Self-sealing elastomeric collar attached to a durable flexible hard plastic base
  • Collar will not crack, chip, peel or separate from base
  • Eliminates caulking - prevents moisture intrusion - no sealing compound required
  • Absolutely leak-proof & fits most wall constructions
  • Seals against air penetration - reduces energy costs
  • Prevents bug or vermin intrusion
  • Accommodates all vent types - ie: plastic, copper, steel or cast iron
  • Order Qty of 1 = 1 Piece

 

Below is more info on our 1/2" to 2-1/2" Thermoplastic Sidewall Flashing 8" x 8.5"

1/2" - 2.5" This item does not ship to APO/FPO addresses.
Online
$15.92 for Each
Retail $23.88
Mfr PN: G12805
Stock: 1389

1/2", 3/4", 1" Galvanized Solar Roof Flashing 18 x 18" 1/2", 3/4", 1" Galvanized Solar Roof Flashing 18 x 18"
Online
$26.52 for Each
Retail $39.78
Mfr PN: G11831
Stock: 28
1/2" to 1" Galvanized Self-Seal Solar Roof Flashing 18" x 18" -

1/2" to 1" Galvanized Self-Seal Solar Roof Flashing 18" x 18" features include:

  • Designed to flash around solar mounting systems
  • Slips easily over Conduit - self-sealing to conduit surface
  • Self-sealing elastomeric tear-out collar
  • Collar will not crack, chip, peel or separate from metal base
  • Eliminates caulking - no sealing compound required
  • Absolutely leak-proof & fits most roof sizes
  • Accommodates all conduit types - ie: PVC, Aluminum, steel
  • Material: Galvanized
  • For used on shingled roof applications - Not for use on hot mopped or built up roofs
  • Order Qty of 1 = 1 Piece

 

Below is more info on our 1/2" to 1" Galvanized Self-Seal Solar Roof Flashing 18" x 18"

1/2" - 1" This item does not ship to APO/FPO addresses.
Online
$26.52 for Each
Retail $39.78
Mfr PN: G11831
Stock: 28

1/2", 3/4", 1" Soft Aluminum Solar Roof Flashing 18 x 18" 1/2", 3/4", 1" Soft Aluminum Solar Roof Flashing 18 x 18"
Online
$32.54 for Each
Retail $48.82
Mfr PN: G11833
Stock: 0

1/2" to 1" Soft Aluminum Self-Seal Solar Roof Flashing 18" x 18" -

1/2" to 1" Soft Aluminum Self-Seal Solar Roof Flashing 18" x 18" features include:

  • Designed to flash around solar mounting systems
  • Slips easily over Conduit - self-sealing to conduit surface
  • Self-sealing elastomeric tear-out collar
  • Collar will not crack, chip, peel or separate from metal base
  • Eliminates caulking - no sealing compound required
  • Absolutely leak-proof & fits most roof sizes
  • Accommodates all conduit types - ie: PVC, Aluminum, steel
  • Material: Aluminum
  • For used on shingled roof applications - Not for use on hot mopped or built up roofs
  • Order Qty of 1 = 1 Piece

 

Below is more info on our 1/2" to 1" Soft Aluminum Self-Seal Solar Roof Flashing 18" x 18"

1/2" - 1" This item does not ship to APO/FPO addresses.
Online
$32.54 for Each
Retail $48.82
Mfr PN: G11833
Stock: 0

1/4 to 4" Master Boot Universal Roof Flashings 1/4 to 4" Master Boot Universal Roof Flashings
Online
$26.65 for Each
Retail $39.98
Mfr PN: G16253
Stock: 0
1-1/2" to 4" Master Boot Universal Roof Flashings - Versatile Universal Flashing for multiple roofing types.

1-1/2" to 4" Master Boot Universal Roof Flashings features include:

  • Universal flashing can be used with any type of corrugated roofing material, ie: asphalt, plastic, tile, rubber, metal, etc. (not for hot mopped or built-up roofs)
  • Self-sealing Step-Cone boot made of premium grade E.P.D.M., which gives it maximum resistance to weathering due to ozone & UV light
  • Flexible Aluminum Alloy rim assures universal flashing form fits and has corrosion resistance - excellent for ribbed metal roofs
  • Provides a Permanent Seal that is unaffected by expansion/contraction, vibration, ice, snow, hailstones, etc.
  • Installs in about 10 minutes
  • Excellent for wall penetrations - weathertight and airtight, inside or outside
  • Easily customized with sharp knife/scissors to accommodate a broad range of diameters
  • Slides over vent pipe & conforms to any roof pitch
  • Order Qty of 1 = 1 Piece
  • Spec Sheet

 

Below is more info on our 1-1/2" to 4" Master Boot Universal Roof Flashings

Size: 1-1/2" - 4"
Case Qty: 6
Minimum Order Qty: 1 This item does not ship to APO/FPO addresses.
Online
$26.65 for Each
Retail $39.98
Mfr PN: G16253
Stock: 0

1/4" to 2" Metal Roof Flashing 1/4" to 2" Metal Roof Flashing
Online
$24.65 for Each
Retail $36.98
Mfr PN: G14741
Stock: 10
1/4" to 2" Metal Roof Flashings - Plumbing and electrical Pipe Roof Flashing.

1/4" to 2" Metal Roof Flashings features include:

  • Pipe roof flashing attaches to most corrugated metal decks, aluminum, copper, lead, plastic, fiberglass, etc.
  • Applications include plumbing, heating & air conditioning pipes & vents, electrical service entrances, etc.
  • Roof flashing is flexible, weather resistant E.P.D.M. resists ozone & UV light
  • Pleated cone adjusts to any roof pitch & allows for complete flexibility
  • Effectively isolates the pipe from the building movement created by expansion, contraction & vibration
  • -30°F - 250°F continuous service temperature range
  • Compatible with pipes of steel, PVC, copper & sheet metal
  • Order Qty of 1 = 1 Piece
  • Spec Sheet

 

Below is more info on our 1/4" to 2" Metal Roof Flashings

Outside Diameter of Pipe to be Flashed: 1/4 - 2"
Base Diameter: 4-3/4"
Height: 3"
Case Qty: 1
Minimum Order Qty: 1 This item does not ship to APO/FPO addresses.
Online
$24.65 for Each
Retail $36.98
Mfr PN: G14741
Stock: 10

1/4" to 4" Metal Roof Flashing 1/4" to 4" Metal Roof Flashing
Online
$32.41 for Each
Retail $48.62
Mfr PN: G14743
Stock: 40
1/4" to 4" Metal Roof Flashings - Plumbing and electrical Pipe Roof Flashing.

1/4" to 4" Metal Roof Flashings features include:

  • Pipe roof flashing attaches to most corrugated metal decks, aluminum, copper, lead, plastic, fiberglass, etc.
  • Applications include plumbing, heating & air conditioning pipes & vents, electrical service entrances, etc.
  • Roof flashing is flexible, weather resistant E.P.D.M. resists ozone & UV light
  • Pleated cone adjusts to any roof pitch & allows for complete flexibility
  • Effectively isolates the pipe from the building movement created by expansion, contraction & vibration
  • -30°F - 250°F continuous service temperature range
  • Compatible with pipes of steel, PVC, copper & sheet metal
  • Order Qty of 1 = 1 Piece
  • Spec Sheet

 

Below is more info on our 1/4" to 4" Metal Roof Flashings

Outside Diameter of Pipe to be Flashed: 1/4 - 4"
Base Diameter: 7-3/4"
Height: 4"
Case Qty: 5
Minimum Order Qty: 1 This item does not ship to APO/FPO addresses.
Online
$32.41 for Each
Retail $48.62
Mfr PN: G14743
Stock: 40

1/4" to 4" Retrofit Roof Flashing 1/4" to 4" Retrofit Roof Flashing
Online
$92.92 for Each
Retail $139.38
Mfr PN: G14751
Stock: 8
1/4" to 4" Retrofit Roof Flashing - Our Chimney Roof Flashing makes tough applications easier.

1/4" to 4" Retrofit Roof Flashing features include:

  • Chimney roof flashing is designed for applications where continuous pipes or obstructions prevent the use of standard flashings
  • Easily installed by wrapping around existing pipe & fastening down onto roof deck
  • The Pliable Cone & Stainless Steel closure can easily be trimmed to the exact diameter of pipe to be flashed
  • Unique Stainless Steel roof flashing closure effectively resists corrosion & provides a positive weatherproof seal
  • Corrosion-Resistant Aluminum Base can be easily shaped to conform to most roof profiles
  • Made of flexible, weatherproof E.P.D.M. rubber
  • Insulates the pipe from building movement caused by expansion, contraction, & vibration
  • -30°F to 250°F continuous service temperature range
  • Pipe diameter markings on the flexible cone in inches & millimeters
  • Order Qty of 1 = 1 Piece
  • Spec Sheet

 

Below is more info on our 1/4" to 4" Retrofit Roof Flashing

Outside Diameter of Pipe to be Flashed: 1/4 - 4"
Base Diameter: 8-3/16"
Case Qty: 1
Minimum Order Qty: 1 This item does not ship to APO/FPO addresses.
Online
$92.92 for Each
Retail $139.38
Mfr PN: G14751
Stock: 8

1/8" to 3/4" Master Boot Universal Roof Flashings 1/8" to 3/4" Master Boot Universal Roof Flashings
Online
$20.78 for Each
Retail $31.18
Mfr PN: G16250
Stock: 8
1/8" to 3/4" Master Boot Universal Roof Flashings - Versatile Universal Flashing for multiple roofing types.

1/8" to 3/4" Master Boot Universal Roof Flashings features include:

  • Universal flashing can be used with any type of corrugated roofing material, ie: asphalt, plastic, tile, rubber, metal, etc. (not for hot mopped or built-up roofs)
  • Self-sealing Step-Cone boot made of premium grade E.P.D.M., which gives it maximum resistance to weathering due to ozone & UV light
  • Flexible Aluminum Alloy rim assures universal flashing form fits and has corrosion resistance - excellent for ribbed metal roofs
  • Provides a Permanent Seal that is unaffected by expansion/contraction, vibration, ice, snow, hailstones, etc.
  • Installs in about 10 minutes
  • Excellent for wall penetrations - weathertight and airtight, inside or outside
  • Easily customized with sharp knife/scissors to accommodate a broad range of diameters
  • Slides over vent pipe & conforms to any roof pitch
  • Order Qty of 1 = 1 Piece
  • Spec Sheet

 

Below is more info on our 1/8" to 3/4" Master Boot Universal Roof Flashings

Size: 1/8" - 3/4"
Case Qty: 12
Minimum Order Qty: 1 This item does not ship to APO/FPO addresses.
Online
$20.78 for Each
Retail $31.18
Mfr PN: G16250
Stock: 8

10 OUNCE NEOPRENE FLASH CEMENT 10 OUNCE NEOPRENE FLASH CEMENT
Online
$78.08 for 12 EA
Retail $107.88
Mfr PN: 1010-9-66
Stock: 0
NEOPRENE FLASHING CEMENT High performance elastomeric cement Super flexibility Elongates to over 250% of original size Ideal for sealing cracks-holes & tears in roof Stronger than plastic roof cement Remains flexible/watertight for up 20 years 1010 10Oz NEOPRENE FLASH CEMNT SIZE:10 Oz.
Online
$78.08 for 12 EA
Retail $107.88
Mfr PN: 1010-9-66
Stock: 0

10" DuraChimney II Storm Collar - 10DCA-SC 10" DuraChimney II Storm Collar - 10DCA-SC
Online
$36.11 for Each
Retail $212.58
Mfr PN: 10DCA-SC
Stock: 35
DuraChimney II is an exceptional factory-built alternative to pre-fabricated masonry chimneys. DuraChimney II is a unitized, lightweight design which eliminates the need for field assembly of pipe sections, allowing for faster installation. DuraChimney II is designed to stay cool on the outside, to provide a hot draft on the inside and to provide a fire-safe design that protects both the chimney and the building. The double-wall, air-cooled design allows the chimney to expand both radially and lengthwise under high temperatures.
Online
$36.11 for Each
Retail $212.58
Mfr PN: 10DCA-SC
Stock: 35

10" DuraTech Tee Support, Galvanized 10" DuraTech Tee Support, Galvanized
Online
$229.15 for EACH
Mfr PN: 10DT-TSB
Stock: 14
DuraTech sets the standard in performance. The ThermalTech blanket insulation in the lengths, elbows, and tees eliminates hot spots + no shifting, settling, or voids. In the event of a creosote fire, this insulation lets the chimney liner expand outward a
Online
$229.15 for EACH
Mfr PN: 10DT-TSB
Stock: 14

10-OUNCE BLACK DRIVEWAY SEAL 10-OUNCE BLACK DRIVEWAY SEAL
Online
$45.76 for 12 EA
Retail $65.88
Mfr PN: 7079818020
Stock: 0
BLACKTOP ASPHALT FILLER AND SEALANT High performance, asphalt-based compound For filling and sealing cracks in driveways, - parking lots and other asphalt surfaces Forms a durable, flexible and watertight seal Resists gas, oil, grease and salt 18017 10-OZ BLK DRIVEWAY SEAL SIZE:10.1 Oz. COLOR:Black
Online
$45.76 for 12 EA
Retail $65.88
Mfr PN: 7079818020
Stock: 0

10.5 BLACK ROOF-140 ROOF SEAL 10.5 BLACK ROOF-140 ROOF SEAL
Online
$41.60 for 12 EA
Retail $59.88
Mfr PN: 1938618
Stock: 36
ROOF SEALANT Provides waterproof barrier on roof surface Apply at temps. between 200-900 degrees F Remains flexible and resists cracking 1938618 10.2 BL RF-140 RF SEAL SIZE:10.5 Oz. COLOR:Black
Online
$41.60 for 12 EA
Retail $59.88
Mfr PN: 1938618
Stock: 36

10.5-OUNCE ROOF CEMENT 10.5-OUNCE ROOF CEMENT
Online
$25.92 for 12 EA
Retail $33.48
Mfr PN: 2172-9-66
Stock: 391
BLACK JACK ROOF CEMENT Wet or dry application Stops leaks, pointing, sealing and bonding Bonds loose shingles 2172 10.5Oz ROOF CEMENT SIZE:10.5 Oz.
Online
$25.92 for 12 EA
Retail $33.48
Mfr PN: 2172-9-66
Stock: 391

108657 4 FT. 2X5 CL WALL CONNECTOR FLASHING 108657 4 FT. 2X5 CL WALL CONNECTOR FLASHING
Online
$16.32 for 1 EA
Retail $20.99
Mfr PN: 108657
Stock: 26
This item can NOT be shipped to these states CA
SUNTUF WALL CONNECTOR FLASHING Use with Suntuf Corrugated Poly Panels Gives projects a finished look 4 Ft. 2" long x 8" wide 108657 4 FT. 2X5 CL WAL CONN FLASH COLOR:Clear
Online
$16.32 for 1 EA
Retail $20.99
Mfr PN: 108657
Stock: 26