2 in 1 Adjustable Outrigger 4 Piece Set, Adjusts 18 to 34 inches 2 in 1 Adjustable Outrigger 4 Piece Set, Adjusts 18 to 34 inches
Online
$125.86 for each
Mfr PN: GSAOSET
Stock: 28

The Pro-Series 4 Piece Set Adjustable Scaffolding Outriggers attach to the Pro-Series 6 Foot Multi Use Scaffolding Unit to keep the unit stable when double and triple stacked. Adjustable width from 23 to 26 inches allowing the scaffold to be safely stacked. Ideal for home improvement projects like painting, patching drywall or cleaning windows. Meets all OSHA and ANSI scaffolding regulations.

Feature:

  • Set of 4 outriggers
  • Use for support when stacking Pro-Series Multi-Use Scaffold (model GSSI)
  • Three settings adjust in 1.5 inch increments
  • Adjustable length of 23, 24.5, and 26 inches
  • Assembled size 21 H x 2.5 W inches
  • Durable steel construction, made of 1.5 inch tubular steel
  • Powder coat paint finish
  • Includes 8 connector pins, 8 support brackets, and 8 clamps
  • Casters not included
Online
$125.86 for each
Mfr PN: GSAOSET
Stock: 28

2.5 Level Rolling Interior Scaffold Tower 2.5 Level Rolling Interior Scaffold Tower
Online
$1083.20 for each
Mfr PN: TOWERINT253
Stock: 18

With the Pro-Series 2.5 Level Rolling Interior Scaffold Tower you can access light fixtures to change light bulbs or clean tall windows in the great room. This Scaffold Tower allows you to easily access hard to reach places to install acoustical or ceiling tiles, perform electrical work or complete HVAC installation.The components included in the Pro-Series 2.5 Story Interior Scaffold Tower create a configuration that is shorter than a conventional scaffold tower, by utilizing two 6ft. Multi-Purpose Scaffold Sets, and one 3ft. Knock Down Scaffold System. Roll from one end of the room to the other, for painting, patching, wallpapering and hanging drywall with 5 inch swivel locking casters.

Feature:

  • Scaffold Tower Set Includes:
  • Two 6 ft. Multi-Purpose Rolling Scaffold (GSSI)
  • One 3 ft. Knock Down Scaffold (GSSIKD)
  • 1 Guard Rail Set for No. GSSI (GSGRS)
  • 4 Piece Adjustable Outrigger Set (GSOAOSET)
  • Intended for interior use,
  • Maximum load capacity: 735 lbs
  • Durable powder coat paint finish
  • 1.5 inch tubular steel construction
  • 0.5 inch thick wood deck with steel frame
  • Includes eight 5 inch locking swivel casters
  • Work platforms measures 66.75 L x 28.25 W inches
  • Guard rail size 69.5 L x 25.5 W x 42.5 H in.
  • Overall size: 74 in. long x 97 in. wide x 18 ft. 6 in. tall
  • Wood/Steel platform sits up to 15 feet off the ground
  • Maximum reach of 21 feet
  • Max load decreases when adding and stacking units, one unit can hold up to 1,000 lbs, 2 units can hold up to 841 lbs, 3 units can hold up to 735 lbs.
  • Meets OSHA and ANSI scaffolding regulations
Online
$1083.20 for each
Mfr PN: TOWERINT253
Stock: 18

3-in-1 Take Apart Adjustable Rolling Scaffolding Utility Cart Work Bench, 6 ft. x. 2.5 ft. x 6.2 ft. 3-in-1 Take Apart Adjustable Rolling Scaffolding Utility Cart Work Bench, 6 ft. x. 2.5 ft. x 6.2 ft.
Online
$274.26 for each
Mfr PN: GSSIKD
Stock: 28

Easy to move, store, and transport, the Pro-Series 3-in-1 Take Apart Adjustable Rolling Scaffold is ideal for home owners and house flippers. Use the Mobile Platform for tackling weekend projects like, painting, cleaning the chandelier, installing crown molding, or hanging curtain rods.The take apart design is easy to dismantle and break down. When fully disassembled, the Pro-Series Wheeled Storage Rack can fit in the trunk or the car for easy mobility, and under the bed for easy storage that won't take up much space.

Feature:

  • 3-in-1 design, use as a scaffold platform, workbench, and rolling utility cart
  • Take apart construction makes the unit easy to store and transport
  • When disassembled the scaffold unit can fit in the bed of a truck for transport or under the bed for storage
  • Great for home owners and DIYers
  • Easily move from room to room, for cleaning, painting, patching, wallpapering and hanging decor
  • Platform adjusts every 2 inches, min. height 25 in., max height 67 in.
  • Four 5-inch locking swivel casters
  • Slim 29.875 in. depth easily fits through most interior doorways
  • 1.5 in. steel tubular frame with durable powder coat paint finish
  • 1/2 in. thick wooden platform deck
  • 750 lbs. load capacity,
  • Overall assembled dimensions: 74.625 L x 29.875 W x 72 in. H
  • Disassembled storage size: 30 L x 40 W x 10 in. H
  • Ideal for interior use
  • Meets OSHA and ANSI scaffolding regulations
  • Unit cannot be stacked, use only as a single story scaffold unit
Online
$274.26 for each
Mfr PN: GSSIKD
Stock: 28

36 36
Online
$63.33 for Each
Retail $95.00
Mfr PN: 12036
Stock: 0
The easy-to-use 12036 scaffold bracket offers convenience for residential or commercial roofing projects. It is installed over wall sheathing just below the eave height on one or all four sides of a structure to create a safe, convenient walkway for erection of roof trusses, plywood, shingles, fascia, gutters, and under-eave covering. It includes a 3/16 inches sway brace for right or left hand use and a 5/8 inches safety bolt and clip. It also comes in a 48 inches model.

Online
$63.33 for Each
Retail $95.00
Mfr PN: 12036
Stock: 0

48 48
Online
$96.00 for Each
Retail $100.00
Mfr PN: 12048
Stock: 0
The easy-to-use 12048 scaffold bracket offers convenience for residential or commercial roofing projects. It is installed over wall sheathing just below the eave height on one or all four sides of a structure to create a safe, convenient walkway for erection of roof trusses, plywood, shingles, fascia, gutters, and under-eave covering. It includes a 3/16 inches sway brace for right or left hand use and a 5/8 inches safety bolt and clip. It also comes in a 36 inches model.

Online
$96.00 for Each
Retail $100.00
Mfr PN: 12048
Stock: 0

7 ft. Aluminum Scaffold Walk Board 7 ft. Aluminum Scaffold Walk Board
Online
$172.40 for Each
Mfr PN: GSAPB
Stock: 18

Build your own custom scaffold tower to fit your specific needs for home repair, maintenance and building construction with the Pro-Series scaffold system pieces. The Pro-Series Aluminum Walk Board measures 7 feet long by 19.25 inches wide and can hold up to 750 lbs. Intended for use with exterior scaffold units.

Feature:

  • Aluminum decking with non-slip surface
  • Durable and lightweight design with 750 lbs. load capacity
  • Measures 7 feet long by 19.25 inches wide
  • Locking tabs keep board in place, 3 hooks on each end for safety and stability
  • For exterior scaffold units, sold individually
  • Meets OSHA and ANSI scaffolding regulations
Online
$172.40 for Each
Mfr PN: GSAPB
Stock: 18

7 Ft. Rolling Interior Mini Scaffold Tower 7 Ft. Rolling Interior Mini Scaffold Tower
Online
$349.26 for Each
Mfr PN: GSSIMTOWER
Stock: 0

Access hard to reach places with the Pro-Series Rolling Interior Mini Scaffold Tower. The smaller size is great for homeowners who have limited storage space, but need to reach cathedral or vaulted ceilings for painting, changing light bulbs, cleaning extra tall windows and completing other maintenance and repair work. Easily roll the Interior Baker Scaffold from one end of the room to the other, and then safely keep it in place with 8 dual locking swivel casters. Two 40 W x 21.25 D inch plywood platforms adjust in height from 2 to 6.5 feet off the ground, give you space to store your supplies and a safe place to stand. Maximum weight capacity is 500 lbs. The Pro-Series Rolling Interior Mini Scaffold Tower Set includes everything you need to build a safe and secure Interior Scaffold System including outriggers and locking pins. Use as a single or double stack unit, based on the needs of the job. When a single unit is used, the scaffold measures only 21.25 inches wide, so it can easily fit through most doorways. Assembly and set-up is quick and easy, and the entire unit breaks down so it is small enough to fit under a bed.

Feature:

  • Easily roll around the room, for painting, patching, wallpapering and hanging drywall
  • Easy set up and assembly, breaks down for easy storage
  • Durable powder coat paint finish for durability
  • Eight 4 inch hard rubber dual locking swivel casters keep the unit safely in place
  • Two plywood platforms adjust in height from 21.5 to 79 inches
  • Steel frame construction with 1/2 in. thick wooden deck, platform dimensions: 40 L x 21.25 in. W
  • Interior use only, 500 lbs. capacity, Overall dimensions: 84 H x 49.25 L x 43 D inches
  • Mini scaffold tower set includes: 4 piece scaffold ladders, 2 plywood decks, 4 scaffold outriggers, 20 locking pins, and 8 locking swivel casters
Online
$349.26 for Each
Mfr PN: GSSIMTOWER
Stock: 0

BRACE SCAFFOLD CROSS 7X4FTX1IN BRACE SCAFFOLD CROSS 7X4FTX1IN
Online
$24.82 for EA
Retail $33.39
Mfr PN: M-MC4884
Stock: 440
SCAFFOLD CROSS BRACE Galvanized cross brace For use with exterior scaffolding Meets ANSI & OSHA standards Dimensions: 4 ft. x 7 ft. M-MC4884 7X4 GALV BRACE FINISH:Galvanized
Online
$24.82 for EA
Retail $33.39
Mfr PN: M-MC4884
Stock: 440

Buffalo Tools Three Story Rolling Scaffold Tower Buffalo Tools Three Story Rolling Scaffold Tower
Online
$1504.83 for each
Mfr PN: TOWER3
Stock: 18

Homeowners and contractors alike will appreciate the Three Story Rolling Scaffold Tower. Easily and safely get over 17 feet off the ground for painting, cleaning windows, maintaining roofs or cleaning gutters. Use for installing siding, laying brick, overhead door installation, or even sign installation.

The Three Story Rolling Scaffold Tower includes everything you need to build a safe and secure exterior scaffold system, from the castes to the guard rails. Three walk boards, constructed of wood and aluminum, laid side by side create a large 7 foot by 4 foot, 9 inch working platform. The frames, guard rails and braces are made of durable 1 5/8 inch steel tubing. The large 8 inch casters with dual locking foot brakes allow for easy movement across concrete and other smooth and solid surfaces. That's a big help when don't have time to tear down and rebuild the scaffold. This unit is capable of handling a load capacity of up to 750 lbs. Meets OSHA and ANSI scaffolding regulations. Multiple units may be stacked safely when tied off every 20 feet.

  • Scaffold Tower Set Includes:
    • 4 Pieces Adjustable Height Stem Jack (GSASJ )
    • 4 Pieces 8 Inch Caster With Foot Brake (GSC8)
    • 6 Pieces 7 Foot Cross Brace (GSCB7)
    • 6 Pieces 5 Foot x 5 Foot Standard Scaffold Frame (GSF55)
    • 4 Pieces 40 Inch Guard Rail Post (GSGP)
    • 4 Pieces 5 Foot Guard Rail (GSGR5)
    • 4 Pieces 7 Foot Guard Rail (GSGR7)
    • 3 Pieces 7 Foot x 19 Inch Aluminum Walk Board (GSWDB)
    • 1 Set of 4 Piece Connector Pins (GSPIN)
  • Intended for exterior use,
  • Maximum load capacity: 750 lbs.
  • Overall assembled size: 7 ft. L x 5 ft. W x 21 ft., 2 in. H
  • Aluminum walk boards sit up to 17 ft., 10 in. off the ground
  • Large 7 ft. L x 4 foot, 9 in. wide working platform
  • Blue powder coat finish
  • Heavy-duty 1 5/8 in. diameter steel construction
  • Total combined weight: 590 lbs.
  • Meets OSHA and ANSI scaffolding regulations
  • This unit DOES NOT include base plates
Online
$1504.83 for each
Mfr PN: TOWER3
Stock: 18

Buffalo Tools Three Story Stationary Scaffold Tower Buffalo Tools Three Story Stationary Scaffold Tower
Online
$1325.53 for each
Mfr PN: TOWER3A
Stock: 0

Homeowners and contractors alike will appreciate the Three Story Stationary Scaffold Tower Kit. Easily and safely get 15 feet off the ground for painting, cleaning windows, maintaining roofs or cleaning gutters. Use for hanging siding, laying brick, overhead door installation, or even mounting signs.

This Three Story Stationary Scaffold Tower unit includes everything you need to build a safe and secure exterior scaffold system, from the base plates to the guard rails. Three walk boards, constructed of wood and aluminum, lay side by side to create a large 7 foot by 4 foot, 9 inch working platform. The frames, guard rails and braces are made of durable 1- 5/8 inch steel tubing. This scaffold unit can be assembled on the fly, and torn down when need arises to move to another job site. This unit is capable of handling a load capacity of up to 750 lbs. Meets OSHA and ANSI scaffolding regulations. Multiple units may be stacked safely when tied off every 20 feet.

  • Scaffold Tower Set Includes:
    • 6 Pieces 5 x 5 Foot Standard Scaffold Frame (GSF55)
    • 6 Pieces 7 Foot Cross Brace (GSCB7)
    • 4 Pieces 40 Inches Guard Rail Post (GSGP)
    • 4 Pieces 7 Foot Guard Rail (GSGR7)
    • 4 Pieces 5 Foot Guard Rail (GSGR5)
    • 3 Pieces 7 Foot x 19 Inches Wood/Aluminum Walk Board (GSWDB)
    • 4 Pieces Base Plate (GSBP)
  • Intended for exterior use, maximum load capacity: 750 lbs
  • Overall assembled size: 7 feet long by 5 feet wide by 18 feet, 4 inches high, total combined weight: 443 lbs
  • Wood/aluminum walk boards sit 15 feet off the ground, large 7 foot long by 4 foot, 9 inches wide working platform
  • Blue powder coat finish, heavy duty 1 5/8 inch diameter steel construction
  • Meets OSHA and ANSI scaffolding regulations
Online
$1325.53 for each
Mfr PN: TOWER3A
Stock: 0

CANOPY TOP FOR SCAFFOLD END FRAMES CANOPY TOP FOR SCAFFOLD END FRAMES
Online
$121.38 for EA
Retail $133.52
Mfr PN: 14-885
Stock: 3
CANOPY TOP FOR SCAFFOLD END FRAMES Used along the top of scaffold set-up to hold weather protection material inplace3 Fits on top of any 5' wide frame with 13/8" insert pins Brackets are welded on to each end to hold a 2 x 4 15/8" inner diameter mounting tube on 5’ centers Full extension is 5’ past end frame
Online
$121.38 for EA
Retail $133.52
Mfr PN: 14-885
Stock: 3

CASTER SCAFFOLDING 750LB 8IN CASTER SCAFFOLDING 750LB 8IN
Online
$99.94 for 4 EA
Retail $141.16
Mfr PN: M-MBC8
Stock: 330
8 in wheel enables to easily move scaffolding and locks into place for stability and reliability. Secure and safe, use with standard or arch frame. Caster wheels have a 3.88 in Height stem, they do not clamp. Use with locking pin. 750 Lb. Capacity Fits Dia In=1-3/8 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$99.94 for 4 EA
Retail $141.16
Mfr PN: M-MBC8
Stock: 330

GUARDRAIL 5FT GUARDRAIL 5FT
Online
$10.92 for EA
Retail $14.29
Mfr PN: M-MGR5
Stock: 168
EXTERIOR SCAFFOLDING GUARD RAIL Use along with MetalTech guard rail posts - (M-MGPUSL) for scaffold safety & security Made of 1" O.D. galvanized steel tube, 16 ga. Precision stamped ends are flattened - and hole punched for easy installation A minimum of 2 guard rails must be installed - on each side of scaffold Meets OSHA safety standards M-MGR5 5 FT. SCAFFOLD GUARDRAIL SIZE:5 Ft. FINISH:Blue
Online
$10.92 for EA
Retail $14.29
Mfr PN: M-MGR5
Stock: 168

GUARDRAIL 7FT GUARDRAIL 7FT
Online
$12.00 for EA
Retail $15.69
Mfr PN: M-MGR7
Stock: 149
Meets ANSI, CSA and OSHA standards. Galvanized Dimensions In=84Weight Lb=4.36 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$12.00 for EA
Retail $15.69
Mfr PN: M-MGR7
Stock: 149

GUARDRAIL POST W/WEDGE CLAMP GUARDRAIL POST W/WEDGE CLAMP
Online
$23.96 for EA
Retail $30.39
Mfr PN: M-MGPUSL
Stock: 234
GUARDRAIL POST WITH SUPPORT Guard rail post with sedge clamp support is - built with rugged steel tube construction Has anti-slip blue powder-coat finish Install onto the coupling pins seated in - the top of the scaffold frame Sold individually - requires 4 posts for - each scaffolding set M-MGPUSL GUARDRAIL POST FINISH:Blue
Online
$23.96 for EA
Retail $30.39
Mfr PN: M-MGPUSL
Stock: 234

I-C1CAS5 5 IN. SCAFFOLD CASTER I-C1CAS5 5 IN. SCAFFOLD CASTER
Online
$72.64 for 2 EA
Retail $81.98
Mfr PN: I-C1CAS5
Stock: 5
CISC SCAFFOLD 5" REPLACEMENT CASTER 5" double-locking, heavy-duty caster Compatible with CISC scaffold Meets ANSI, CAS and OSHA standards I-C1CAS5 5 IN. SCAFFOLD CASTER SIZE:5"
Online
$72.64 for 2 EA
Retail $81.98
Mfr PN: I-C1CAS5
Stock: 5

I-CISGRJP 6 FT. BAKER GUARDRAIL I-CISGRJP 6 FT. BAKER GUARDRAIL
Online
$202.06 for 1 EA
Retail $229.99
Mfr PN: I-CISGRJP
Stock: 0
JOBSITE SERIES GUARDRAILS SYSTEM Guardrail system compatible with I-CISC, - I-CAISC and I-BMSS scaffolds Assembled dimensions: 69.75"x 29.25"x 44.5" 1" - 16 gauge structure Includes 2 guardrails with gates and - 4 each locking pins Weight: 59 lb. Meets ANSI, CSA and OSHA standards I-CISGRJP 6 FT. BAKER GUARDRAIL COLOR:Yellow
Online
$202.06 for 1 EA
Retail $229.99
Mfr PN: I-CISGRJP
Stock: 0

I-CISTR BAKERS TOOL SHELF I-CISTR BAKERS TOOL SHELF
Online
$35.26 for 1 EA
Retail $36.99
Mfr PN: I-CISTR
Stock: 6
TOOL SHELF FOR 6 FT. BAKERS SCAFFOLD Made of black polypropylene Tool shelf has 50 lb. load capacity Compatible with I-CISC, I-CISCTP - and I-CISCPY scaffolds Dimensions: 30-1/4"x 20"x 2.75" Weight: 5-1/2 lb. I-CISTR BAKERS TOOL SHELF COLOR:Black
Online
$35.26 for 1 EA
Retail $36.99
Mfr PN: I-CISTR
Stock: 6

LOCK ARM SCAFFOLD 13IN LOCK ARM SCAFFOLD 13IN
Online
$4.69 for EA
Retail $5.49
Mfr PN: M-MLA13
Stock: 220
SCAFFOLD LOCK ARM 13" center to center exterior scaffold lock arm Powder coat finish Meets ANSI, CSA and OSHA standards M-MLA13 13 IN. SCAFFOLD LOCK ARM SIZE:13" COLOR:Blue
Online
$4.69 for EA
Retail $5.49
Mfr PN: M-MLA13
Stock: 220

M-MPP719 PLATFORM 7FT X 19IN M-MPP719 PLATFORM 7FT X 19IN
Online
$107.34 for EA
Retail $151.45
Mfr PN: M-MPP719
Stock: 186
Includes sliding locks for securing. 5/8 plywood. Meets ANSI, CSA and OSHA standards. 75 Pound Duty Rating Lgth Ft Wdth In=7 x 19 This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$107.34 for EA
Retail $151.45
Mfr PN: M-MPP719
Stock: 186

Multi-Use Mini Scaffold Outriggers - 4 Piece Set Multi-Use Mini Scaffold Outriggers - 4 Piece Set
Online
$54.80 for Each
Mfr PN: GSSIMOS
Stock: 28

Give your scaffolding stability and mobility with the Pro-Series 4 Piece Multi-Use Mini Scaffold Outriggers Set during home improvement projects like painting, patching drywall or cleaning windows. Designed to fit the Pro-Series 4-Foot Mini Multipurpose Interior Scaffolding, model GSSIM, the heavy-duty steel outriggers have a powder coat finish to protect against rust and wear. Using Outriggers will extend the overall width of the Scaffolding by 28.5 inches.

Feature:

  • 4 piece outrigger set comes with 4 locking pins, 8 long plumb blossom screws, and, 4 short plumb blossom screws
  • Actual size 14.25 W x 1.18 D x 16.25 H inches
  • Extends total width of scaffolding by 28.5 inches
  • For use with Pro-Series brand scaffolding systems, model GSSIM (4-Foot Mini Multipurpose Scaffolding)
  • Casters are not included
Online
$54.80 for Each
Mfr PN: GSSIMOS
Stock: 28

OUTRIGGER EXT 32IN OUTRIGGER EXT 32IN
Online
$62.02 for EA
Retail $78.59
Mfr PN: M-MO32
Stock: 140
MASON FRAME SCAFFOLD OUTRIGGER Outrigger designed for use with mason frame - scaffold systems Provides additional stability and attaches - to the scaffold frame with 2 bolt-on clamps Blue textured anti-slip power-coat blue finish Meets ANSI, CSA and OSHA standards Weight: 22 lb. M-MO32 32 IN. SCAFFOLD OUTRIGGER SIZE:32" FINISH:Blue
Online
$62.02 for EA
Retail $78.59
Mfr PN: M-MO32
Stock: 140

OUTRIGGER W/CASTER 6IN OUTRIGGER W/CASTER 6IN
Online
$212.68 for BX
Retail $267.19
Mfr PN: I-BMSO4
Stock: 7
Specifications: 21.5 x 4 x 26.5 in. assembled, weighs 52 lb, 6 in. double locking heavy duty casters. Includes 4 outriggers, 4 casters and 12 locking pins. Compatible with I-BMSS. Meets ANSI, CSA and OSHA standards. This item cannot be shipped to APO/FPO addresses. Please accept our apologies
Online
$212.68 for BX
Retail $267.19
Mfr PN: I-BMSO4
Stock: 7

OUTRIGGERS SET W/CSTR 4-5IN OUTRIGGERS SET W/CSTR 4-5IN
Online
$98.86 for BX
Retail $139.55
Mfr PN: I-CISO4
Stock: 101
SCAFFOLD OUTRIGGERS - SET OF 4 Set contains 4 outriggers, 4 each - 5" double-locking, heavy-duty casters, - 8 locking-pins and 4 knobs Compatible with I-CISC Jobsite Series - 6' Baker scaffold Use to stabilize scaffold Meets ANSI, CSA and OSHA standards I-CISO4 6 FT. BAKER OUTRIGGERS
Online
$98.86 for BX
Retail $139.55
Mfr PN: I-CISO4
Stock: 101

PIN COUPLING W/COLLAR 1IN PIN COUPLING W/COLLAR 1IN
Online
$3.13 for EA
Retail $4.05
Mfr PN: M-MLC1S
Stock: 491
SCAFFOLD COUPLING PIN & SPRING LOCK For use with exterior scaffolding Dimensions: 1-3/8" with 1" collar Zinc with galvanized finish Weight: 0.9 lb. Meets ANSI, CSA and OSHA standards M-MLC1S COUPLING PIN FINISH:Galvanized
Online
$3.13 for EA
Retail $4.05
Mfr PN: M-MLC1S
Stock: 491

Pro-Series 18 inch Scaffolding Outriggers with Casters - 4 Piece Set Pro-Series 18 inch Scaffolding Outriggers with Casters - 4 Piece Set
Online
$97.86 for each
Mfr PN: GSORWCS
Stock: 18

Give your scaffolding stability and mobility with the Pro-Series 4-Piece 18-inch Scaffolding Outrigger Set with Casters during home improvement projects like painting, patching drywall or cleaning windows. 4-inch hard rubber dual locking casters allow for easy movement across concrete and other smooth, solid surfaces. Heavy-duty steel outriggers provide stability and support. Extends total width of scaffolding by 36 in. Meets all OSHA and ANSI scaffolding regulations.

  • Each Outrigger Set comes with 4 outriggers, 4 four-inch dual locking casters, 4 locking pins
  • Outriggers have a heavy-duty steel construction with durable powder coat paint finish
  • 4 x 1.5 inch non-marring hard rubber wheels
    Extends total width of scaffolding by 36"
  • Meets all OSHA and ANSI scaffolding regulations
  • For use with Pro-Series brand scaffolding systems, model GSSI ( 6 Foot Multi Use Scaffolding Unit)
  • Color: Yellow
  • Material: Metal
  • Assembly Required: Y
  • Warranty: 90 Day Limited
  • Country of Origin: China
Online
$97.86 for each
Mfr PN: GSORWCS
Stock: 18

Pro-Series 20 Ft. Mobile Aluminum Scaffold Tower Pro-Series 20 Ft. Mobile Aluminum Scaffold Tower
Online
$3041.62 for each
Mfr PN: GSALTWR
Stock: 0

This unit is a time saver when you need to reach heights of 20 feet. Great for painting and maintaining roofs or gutters. Use for overhead door installation, acoustical/ceiling tiles and much more. Solid construction design includes caster wheels for easy movement across concrete or solid and smooth surfaces. That's a big help when you have limited time and can't tear down or rebuild the scaffold. Clean windows, add lighting or perform electrical work. Durable and solid, yet lightweight aluminum construction can be assembled on the fly, and torn down when need arises to move to another job site. Homeowners and contractors alike will appreciate the load capacity this unit is capable of handling, up to 1,000 lbs. That means you can easily get two or more big guys to help hang drywall, mount signs, or install HVAC systems.

This unit includes many individual pieces, but an easy-to-follow manual with pictures is included for setup. Meets OSHA and ANSI scaffolding regulations.Max 1,000 lb. Load capacity

  • For exterior use only
  • Color-coded hooks helps with assembly
  • Aluminum construction
  • 3 individual frames combine to form scaffold tower
  • Includes guard rail and 4 stabilizer legs
  • 2-piece ladder system connects into one 19 ft. unit
  • Includes 8 ft. Platform w/hatch and wooden toe board
  • Four 6 inch adjustable caster wheels
  • Footprint measures 95 in L x 65 in W
Online
$3041.62 for each
Mfr PN: GSALTWR
Stock: 0

Pro-Series 4 Foot Roll And Fold Mini Scaffold Pro-Series 4 Foot Roll And Fold Mini Scaffold
Online
$108.53 for each
Mfr PN: GSM4BF
Stock: 0

There are so many uses around the shop or home for the 4 Foot Roll and Fold Mini Scaffold you will wonder how you ever lived without it. Use the scaffold as a bench, platform cart or storage shelf. Two adjustable height steel deck boards with an individual weight capacity of 250 pounds can hold you, your tools, and supplies. Paint or renovate the inside or outside of your home, hang window blinds, and store paper and office supplies.

The deck boards feature a non-slip finish to help provide a more stable standing surface. 4 inch swivel casters lock securely in place making the Mini Scaffold safe and secure to use.

The Mini Scaffold can be stored almost anywhere. It has a slim profile when folded, it measures just 7 inches deep by 4 feet high by 4 feet wide. It can even fit under some beds. Two locking latch connector pins are included to keep the scaffold securely folded together when not in use.

  • Two adjustable height steel deck boards with non-slip finish
  • 500 lbs. working load capacity (250 lbs. each platform)
  • Assembled size: 4 ft. L x 4 ft. H x 2 ft. W
  • Durable, powder-coated paint finish
  • Folds to only 7 in. wide for easy storage
  • 4 in. locking swivel casters
  • For interior or exterior use
Online
$108.53 for each
Mfr PN: GSM4BF
Stock: 0

Pro-Series 4 Piece Set 18 Inch Scaffolding Outriggers Pro-Series 4 Piece Set 18 Inch Scaffolding Outriggers
Online
$93.20 for each
Mfr PN: GSORSET
Stock: 13

The Pro-Series 4 Piece Set 18 in. Scaffolding Outriggers attach to the Pro-Series 6 Foot Multi Use Scaffolding Unit (GSSI) to keep to keep the unit stable when double stacked. Extends total width of scaffolding by 36 in. Ideal for home improvement projects like painting, patching drywall or cleaning windows. Meets all OSHA and ANSI scaffolding regulations.

  • For use with Pro-Series 6 Foot Multi Use Scaffolding Unit (GSSI)
  • Set of 4 outriggers
  • Powder coat paint finish
  • Heavy duty steel construction
  • Each outrigger weighs 11.5 lbs
  • Extends total width of scaffolding by 36 in.
Online
$93.20 for each
Mfr PN: GSORSET
Stock: 13

Pro-Series 4-Foot Mini Multipurpose Scaffolding Pro-Series 4-Foot Mini Multipurpose Scaffolding
Online
$147.20 for each
Mfr PN: GSSIM
Stock: 0

Use the Pro-Series 4 Foot Mini Multi-purpose Scaffolding at home or on the job site to easily access light fixtures, safely paint high walls and ceilings, or add crown molding. Slim enough to fit through interior doorways, the 4 locking swivel casters make it easy to move this platform ladder from room to room, and project to project. The durable steel construction and 1/2 inch thick plywood deck can hold up to 500 pounds.

  • Easily move from room to room, for painting, patching, wallpapering and hanging drywall
  • Four 5-inch locking swivel casters and a slim 21 in. depth easily maneuver through interior doorways
  • Steel frame construction with 1/2 in. thick wooden deck
  • Adjustable platform height: 21.5 to 45.25, platform dimensions: 35.5 L x 21.25 in. W
  • 500 lbs. capacity, Overall dimensions: 73.5 L x 29.25 W x 75 in. H
  • 90 Day Limited Warranty
Online
$147.20 for each
Mfr PN: GSSIM
Stock: 0

Pro-Series 6-Foot Multipurpose Scaffolding Pro-Series 6-Foot Multipurpose Scaffolding
Online
$236.66 for each
Mfr PN: GSSI
Stock: 28

Access light fixtures and hard to reach places on a construction project with the Pro-Series 6 Foot Multipurpose Scaffolding. It features steel construction with a powder-coated finish for extra protection and weather resistance.

Easily move from room to room, for painting, patching, wallpapering and hanging drywall with four 5 inch swivel locking casters. With a width of only 29 inches this scaffold fits through standard doorways.

This unit can be double stacked (with additional support and guard rail, both SOLD SEPARATELY). It can also be combined with additional components to stack the units higher and create a customized interior scaffold system that meets the requirements of your particular job. Meets OSHA and ANSI scaffolding regulations.

  • 6 ft. multipurpose scaffolding with four 5 in. locking swivel casters
  • For interior or exterior use
  • All steel construction
  • 1/2 in. thick wooden deck with steel frame
  • 1,000 lbs. capacity
  • 29 in. wide, fits through standard doorways
  • Durable powder coated paint finish in yellow
Online
$236.66 for each
Mfr PN: GSSI
Stock: 28

Pro-Series Scaffolding Guard Rail System Pro-Series Scaffolding Guard Rail System
Online
$156.26 for each
Mfr PN: GSGRSU
Stock: 13

The Pro-Series Scaffolding Guard Rail System attaches to the Pro-Series 6 Foot Multi Use Scaffolding Unit (GSSI) to keep you safe from falling while working on home improvement projects like painting, patching drywall or cleaning windows. Meets OSHA and ANSI scaffolding regulations.

  • For use with pro-series 6 foot multi use scaffolding unit (GSSI)
  • Powder coat paint finish
  • 1 inch tubular steel construction
  • Assembled size: 69.5 x 42.5 x 28.5 inches, weights: 56 lbs
Online
$156.26 for each
Mfr PN: GSGRSU
Stock: 13