Shop by Brand: Wave WiFi

WiFi EC HP Dual-Band - AC

Wave WiFi’s EC HP DB uses a 600Mhz processor and provides long-range connections to good quality hotspots. The EC HP DB supports MiMo data transmission, with the ability to use multiple antennas at the same time to send and receive data packets faster and more reliably.

The EC HP DB also supports WEP, WPA and WPA2 encryption. The system is also an ethernet converter (EC Unit), so a direct connection can be made to any WAN ethernet enabled device, router or switch, resulting in flawless performance as a standalone system or integrated into the vessel’s network. The system comes with
a Web-based user friendly interface. There is no software to install.

Wave WiFi products offer outstanding performance because of the proprietary firmware technology embedded in each unit. The Webbased firmware permits the user to scan for access points (Hotspots) and provides a detailed diagnostic of the quality of each hotspot. The GUI (pronounced “gooey”) or Graphical User Interface allows the user to see the signal strength and quality in real time of any connected hotspot.

Features:

• The 600Mhz processor Delivers Faster Response times from the User Interface
• One Gigabit Ethernet Port
• Supports Concurrent 2.4Ghz / 5Ghz Wi-Fi Frequencies
• User Friendly proprietary Web-based Wave WiFi Interface
• DC Power, 12V (Cable Included)
• Weather Resistant enclosure
• Optional MiMo Kit for further range and Better Data Throughput
• Dual Band Omni-Directional N-Female Antenna
• High Powered Dual Band receiver for longer range
• 2 year limited warranty

Kit Contains:

• Quick Start guide
• 25' of CAT5e Ethernet cabling
• 10' DC 12V power cable
• 25' of low loss antenna cabling with two spare “N” connectors
• Two Dual Band Omni- Directional N-Female antennas
• Two rubber duck Dual Band Omni-Directional antennas

Freedom Dome

The Freedom Dome provides Dual Band MU-MIMO 2.4Ghz + 5Ghz WiFi in a convenient easy to mount format.  

The dome is complete with stainless steel 1-14” female thread mount.  Power and connection are provided by a single 12V PoE cable for easy installation.  When connected to a wireless router, the Freedom provides Internet connectivity for numerous connected devices. 

The system comes with a user-friendly web-based interface and there is no software to install. 

Features:

• Supports concurrent 2.4Ghz / 5Ghz Wi-Fi frequencies
  • User friendly proprietary Web-based Wave WiFi Interface
• MIMO (Multiple Input/Multiple Output) enclosed antenna array
• Single cable 12V POE (Power Over Ethernet) power connection
• Uses a standard 1″-14 threaded base/mount
• Dimensions - 10" X 12" dome
• Weight -  4lbs

In the Box:

• Freedom Dome 
• Stainless Steel  1-14 Thread Female Adapter
• Install hardware
• Quickstart Guide
• 25' Cat5e Ethernet Cable
• Passive PoE Injector
• 12vdc regulated power supply

*Sold as an Individual

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

MBR-300 Pro Marine Broadband Router - 3 Source

The Wave WiFi Marine Broadband Router (MBR) 300 PRO is a cost-effective Broadband source selector suitable for a sportfish or small yachts. The MBR-300 PRO is the central control element for a robust internet communications system, with a powerful Intel 1.8GHz 64 Bit Dual Core Processor, 2 Gigabit of RAM, 8 Gigabit Solid Date Drive, and Four (4) 1 Gigabit Ethernet Ports allowing for seamless network traffic.

Features:

• Plug and play setup
  
• Content filter
  
• Download/upload speed control
  
• Allowed IP and MAC addresses
  
• Free and controlled Internet access
  
• Login page configuration
  
• WAN port selection for multiple devices
  
• 1-year limited warranty

Firewall

• Traffic monitoring and blocking of non-approved data traffic

Login Page Customization

• Branded page, personalized for your yacht
  
• Login page access code generator
  
• Login code usage reporting

Operation

• Marine grade equipment suitable for any ship data network environment

MBR-700 Pro Marine Broadband Router - 8 Source

The Wave WiFi Marine Broadband Router (MBR) 700 PRO is a cost-effective Broadband source selector suitable for a sportfish and mega yachts. The MBR- 700 PRO is the central control element for a robust internet communications system, with a powerful Intel 1.8GHz 64 Bit Dual Core Processor with 2 Gigabit of RAM, 8 Gigabit Solid State Drive, Four (4) 1 Gigabit Ethernet Ports, and Four (4) 10/100 Megabit ports allowing for seamless network traffic.

Features:

• Plug and play setup
  
• Content filter
  
• Download/upload speed control
  
• Allowed IP and MAC addresses
  
• Free and controlled Internet access
  
• Login page configuration
  
• WAN port selection for multiple devices
  
• 1-year limited warranty

Firewall

• Traffic monitoring and blocking of non-approved data traffic

Login Page Customization

• Branded page, personalized for your yacht
  
• Login page access code generator
  
• Login code usage reporting

Operation

• Marine grade equipment suitable for any ship data network environment

MBR 500 Router

The Wave WiFi MBR 500 has an internal access point and is a Multi-Source Failover Router.  This means that it can manage multiple sources at a time as well as produce the wireless signal to distribute the data to wireless devices. The MBR 500 will give you the ability to manage these sources from one easy to access browser based page.

From this page you can manage any additional Wave WiFi devices such as access points and receivers, as well as third party satellite or cell devices.

Also capable of supporting "Guest Networks."  This means that any devices connected to the "Guest Network" will not have access to the MBR 500 manage page.  They will only be able to use the data provided by the MBR router and not be able to manipulate it.

In the Box:

• MBR 500 Router
• Two (2) Access point antennas 
• One (1) 12VDC power cable
• One (1) Ethernet cable (Category 5) 
• Quick start guide & manual

*Sold as an Individual 

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

MBR 550 Marine Broadband Router

With the MBR 550 you will enjoy the ability to travel with cell functionality built in. The 550 comes with a SIM slot for SIM activated Cell Data, and has all the other great features of the MBR 500.

The MBR 550 is also capable of supporting ‘Guest Networks’. This means that any devices connected to the Guest Network will not have access to the MBR 500 or 550’s manage page. They will only be able to use the data provided by the MBR router and not be able to manipulate it.

Features:

• (2) Access Point antennas (2.4GHz)
• (2) Cellular Paddle antennas
• (1) 12VDC Power Adapter
• (1) SIM slot
• (1) Quick Start / Configuration Guide
• 1 year limited warranty

Rogue Pro Dual-Band

The Rogue Wave Pro DB features the same trouble free mounting method as the Rogue Wave Pro. It is housed in a sealed and polished, rugged, marinized stainless steel case.

The Rogue Pro DB has an integral 1”-14 threaded base that will fit most standard marine mounts. The Rogue Pro housings were developed in response to a need for an extremely Marinized and Rugged device for commercial, military and Homeland Security projects.

Like all Wave WiFi models, the Rogue Wave Pro DB is an ethernet converter (EC). Direct connection can be made to any WAN ethernet enabled device, router or switch. When connected to a wireless router, the Rogue Wave Pro DB provides Internet connectivity for numerous wireless devices aboard the boat. There is no software installation and all operation of the device is purely Web-based.

Wave WiFi products offer outstanding performance because of the proprietary firmware technology embedded in each unit. The Web-based firmware permits the user to scan for access points (Hotspots) and provides a detailed diagnostic of the quality of each hotspot. The GUI (pronounced “gooey”) or Graphical User Interface allows the user to see the signal strength and quality in real time of any connected hotspot.

Features:

• The 600Mhz processor Delivers Faster Response times from the User Interface
• Capable of up to 125Mbit aggregate throughput
• Supports Concurrent 2.4Ghz / 5Ghz Wi-Fi Frequencies
• User Friendly proprietary Web-based Wave WiFi Interface
• 120/220 VAC & 12 VDC POE injector
• Dual Band Omni-Directional N-Female Antenna
• Stainless Steel 1”- 14 Threaded Base that fits most standard marine antenna mounts
• Marinized Rugged Stainless Steel body for better weather protection

Specifications:

• CPU: 600Mhz
• Ethernet: One 10/100 Mbit/s Fast Ethernet Port
• Wireless: 802.11 b/g/n 2.4Ghz and 802.11 a/n 5Ghz Radio
• Power: Passive 12V PoE at 1A Only
• Operating Temp: -22F to +158F / -33C to +70C
• Connector: N-Male
• Mounting: 1" - 14 Threaded Base
• Material: Marinized Stainless Steel Body

Kit Contains:

• Quick Start guide
• 25' of CAT5e Ethernet cabling
• 120/220 VAC & 12VDC power adapter
• 12V - 24V POE injector
• Dual Band Omni-Directional N-Female Antenna

Rogue Pro Ethernet Converter/Bridge

The Rogue Pro features the same trouble-free high powered performance of the Rogue Wave in a sealed, polished stainless steel marine case. The Rogue Pro requires an integral 1"-14" standard antenna mount (not Included).

In addition to the enhanced dust and moisture resistance, the stainless steel housing offers superior impact resistance. The Rogue Pro was developed in response to a need for an extremely ruggedized WiFi device for commercial, military and Homeland Security projects.

Like all Wave WiFi models, the Rogue Pro is an Ethernet Converter (EC) so a direct connection can be made to any Ethernet enabled device, router or switch. This means that, when connected to a wireless router, the Rogue Wave provides internet connectivity for numerous wireless devices aboard the boat. There is no software to install and no power robbing USB coonections.

Features:

• Adjustable output up to 29dBm (800mW)
  
• Supports 802.11 b/g/n (2.4 GHz)
  
• Up to 7-mile range*
  
• Easy to use proprietary web-based Wave WiFi Interface
  
• Compact, ultra-small Stainless Steel design
  
• 120/220 VAC & 12 VDC PoE injector
  
• 1-year limited warranty

*Actual distance may be affected by the strength and quality of the hot spot signal, as well as having a clear line-of-site to the boat.

What's in the box:
Wavewifi EC-Rogue
8db Marine Antenna
12/110V Poe Pwr Supply
25' Ethernet Cable
Quick Start Guide & Manual

Rogue Reach Dual-Band

Wave WiFi’s Rogue Reach Dual-Band (DB) features the same trouble free mounting method as the Rogue Wave Pro with a 1” - 14 female threaded base that will fit most standard antenna mounts. Extremely easy to install and completely enclosed for total weather protection and mouting applications.

The Rogue Reach DB has up to 125Mbit aggregate throughput and a 600Mhz processor. Both the Rogue
Reach and Rogue Reach DB are Ethernet Converters (EC units), therefore a direct connection can be made
to any WAN ethernet enabled device, router or switch.

When connected to a wireless router, the Rogue Reaches provide Internet connectivity for numerous wireless devices. The systems come with a user friendly Web-based interface. There is no software installation.

Wave WiFi products offer outstanding performance because of the proprietary firmware technology  embedded in each unit. The Web-based firmware permits the user to scan for access points (Hotspots) and provides a detailed diagnostic of the quality of each hotspot. The GUI (pronounced “gooey”) or Graphical User Interface allows the user to see the signal strength and quality in real time of any connected hotspot.

Features:

• Easy Installation with 1” - 14 threaded base
• Completely enclosed for total weather protection and endless installation options
• User Friendly proprietary Web-based Wave WiFi Interface
• 120/220 VAC & 12VDC PoE injector
• Dual-Band Omni-Directional Antenna (Rogue Reach DB)
• CAT5e cable (25') affixed to unit
• 580MHz to 600MHz Processing power*
• Cost friendly receiver for multiple applications
• 1 year limited warranty

*Actual distance may be affected by the strength and quality of the Hotspot signal, as well as having a clear line of site to the boat. As we strive for constant product improvement, prices and specifications are subject to change without notice

Specifications:

• 22"H x 1.5"W
• CPU: 600Mhz
• Ethernet: One 10/100 Mbit/s
• Wireless: 802.11 a/n 5Ghz + 802.11 b/g/n 2.4Ghz
• Power: Passive 12v PoE at 1A Only
• Operating Temp: -22F to +158F / -33C to +70C
• Antenna: Dual-Band Omni-Directional
• Mounting: 1” - 14 Female Thread
• Material: Fiberglass

Kit Contains: 

• Quick Start Guide
• 25' of CAT5e cabling affixed to the unit
• 120/220 VAC & 12VDC power adapter
• 12V - 24V POE injector

Rogue Wave Ethernet Converter/Bridge

The Rogue Wave by Wave WiFi is a ultra-small, compact Wireless Bridge and Ethernet Converter with an incredible 800mW output power. Like all Wave WiFi products, the Rogue Wave is an Ethernet Converter (EC), so a direct connection can be made to any other Ethernet enabled device yet without having to install any additional software and without power robbing USB connections. The Rogue Wave is perfect for wireless internet access on smaller inshore boats and RV's when directly connected to a laptop or PC.

Features:

• Adjustable output up to 29dBm (800mW)
• Supports 802.11 b/g/n (2.4 GHz)
• Up to 7-mile range*
• Easy to use proprietary web-based Wave WiFi Interface
• Compact, ultra small design
  
  What's in the box:
• Wavewifi EC-Rogue
• 8db Marine Antenna
• 12/110V Poe Pwr Supply
• 25' Ethernet Cable
• SS Rail Mount
• Quick Start Guide & Manual
• 1 year limited warranty
  
  
  
  
  *Actual distance may be affected by the strength and quality of the hot spot signal, as well as having a clear line-of-site to the boat.

Tidal Wave Dual - Band + Cellular

Surf’s Up! Wave WiFi’s New High Powered Dual Band 3G/4G model boasts concurrent listening on three different frequency bands at the same time; 2.4Ghz + 5.1 – 5.8Ghz WiFi and SIM Cell Data. Our Tidal Wave has a one gigabit Ethernet port and isn’t afraid to use it. This model provides further connection ranges than any other Wave WiFi device. All Wave WiFi models ship with our feature rich customer inspired browser-based user interface, and come with all accessories necessary to get you up and running. The Tidal Wave model supports all encryption types, along with SIM cell data bands on the cellular side. There is no software to install which means better plug and play performance for computer accessories. Enjoy the Luxury of WiFi & Cell on the Water.

Features:

• Supports 2.4GHz / 5GHz (5.1-5.8) Wi-Fi frequencies
• Supports SIM Activated Cell Data Bands
• One Gigabit 10/100/1000 Mbit/s Fast Ethernet Port
• Uses MiMo on all supported frequencies
• (2) 3’ Outdoor High Gain Omnidirectional Dual Band antennas
• (2) Indoor rubber duck Dual Band antennas f/WiFi
• (2) 25’ Ultra Flex Low Loss 400 antenna cables
• (1) Cable Kit - 25' Cat5
• (1) Small rubber duck cellular antenna
• (1) High Gain External Outdoor Cellular Antenna with cable
• (1) 30' Cellular Cable
• 2 year limited warranty

Yacht AP Dual Band (2.4GHz + 5GHz)

This AP integrates nicely with all Wave Wifi products and with most networking equipment. This AP can simultaneously broadcast on 2.4GHz and 5GHz wi-fi spectrums. Use this AP for faster local connections and to broaden the wi-fi range on your Boat or RV. *This AP is 24v PoE powered.

Features:

• Gigabit Ethernet Port
• 2.4GHz + 5GHz
• Broadcast simultaneously
• Up to 300Mbps (2.4GHz)
• Up to 867Mbps (5GHz)
• Sleek Design
• 24V PoE
• 6" Diameter
• 1-year limited warranty

Yacht AP Mini (2.4GHz Only)

This AP integrates nicely with all Wave WiFi products and with most networking equipment. This AP broadcasts on the 2.4GHz network only. Use this AP to cover wi-fi dead zones on your Boat or RV. 

*This AP is 12v PoE powered.

Features:

• 10/100Mbps Port
• 2.4GHz Broadcast
• Rugged Design
• 12V PoE
• Speeds 54Mbps to 200Mbps
• 4.25" Diameter
• 1-year limited warranty