Shop by Brand: WarmlyYours

Previously available only in spas or luxury hotels, now you can enjoy the clarity of a fog free mirror in your master bathroom. Warmly Yours electric mirror defogger transmits gentle warmth across the mirror's surface to prevent moisture from forming during bathing or showering. This mirror defogger comes ready to install in several shapes and sizes. Self-adhesive backing allows easy application to any wall-hung mirror in just minutes. Pre-attached power leads conveniently connect to your bathroom's 120-volt lighting fixture. The ultra-thin heating film draws only a minimal amount of energy and operates at a constant, regulated temperature of 104 degrees F (40 degrees C) to provide a safe, economical way to keep mirrors fog-free. This is suitable for dry location only.

• 120 volts, 150 watts, 1.3 amps
• 24 Self-adhesive backing allows direct application to the back of any wall-hung mirror in just minutes.
• Power lead connects to 120V lighting fixture
• Item Dimensions: 40"L x 30"W x 0.1"H
• C-UL-US listed, 1-year warranty against defects in materials and workmanship

Extra lead wire for in-flloor heating Tempzone flex roll and mats, 120 volts only, for rolls of 52' long or more

• Use if an accidental nick or cut occurs during a floor heating system installation.
• Non-heated copper conductive wire.
• Double insulated with industrial grade teflon.
• Item Dimensions: 12"L x 0.1"W x 0.1"H

Extra lead wire for in-flloor heating Tempzone flex roll and mats,240 volts only, for rolls of 52' long or more

• Use if an accidental nick or cut occurs during a floor heating system installation.
• Non-heated copper conductive wire.
• Double insulated with industrial grade teflon.
• Item Dimensions: 12"L x 0.1"W x 0.1"H

Extra lead wire for in-flloor heating Tempzone flex roll and mats, 120 volts only, for rolls less than 52'

• Use if an accidental nick or cut occurs during a floor heating system installation.
• Non-heated copper conductive wire.
• Double insulated with industrial grade teflon.
• Item Dimensions: 12"L x 0.1"W x 0.1"H

Extra lead wire for in-flloor heating Tempzone flex roll and mats, 240 volts only, for rolls less than 52'

• Use if an accidental nick or cut occurs during a floor heating system installation.
• Non-heated copper conductive wire.
• Double insulated with industrial grade teflon.
• Item Dimensions: 12"L x 0.1"W x 0.1"H

Eliminate the cold feel of granite, marble, and stone countertops by providing warm, radiant heat with a WarmlyYours FeelsWarm®* standard countertop heater. Ultra-low-profile and virtually invisible, this 11” x 17” heater makes comfortable warmth an option even for smaller sections of your counter space. Conveniently sized to heat an individual area, these standard heaters can be used individually or in combination with others to cover larger sections. The WarmlyYours FeelsWarm® standard countertop heaters adhere discreetly and permanently to the underside of the countertop and gently warm the surface 20-25 degrees above room temperature. The location of the heater tail (which connects the heater to the transformer) is predetermined and is not adjustable.  Comes with a step-down plug-in transformer (which converts the 120 VAC input voltage to 24 VAC) and a Surface Prep Kit for installation on rough under-counter surfaces. Please note that standard countertop heaters will ship 2-3 business days after they are ordered.  If you wish to add a control option to a standard countertop heater, you can purchase a Thermal Control Unit (CTH-TCU), sold separately, which has six individual operating settings.    *FeelsWarm® technology is a registered trademark of Heated Stone Products, patent pending.

Eliminate the cold feel of granite, marble, and stone countertops by providing warm, radiant heat with a WarmlyYours FeelsWarm®* standard countertop heater. Ultra-low-profile and virtually invisible, this 11” x 33” heater makes comfortable warmth an option even for smaller sections of your counter space. Conveniently sized to heat an individual area, these standard heaters can be used individually or in combination with others to cover larger sections. The WarmlyYours FeelsWarm® standard countertop heaters adhere discreetly and permanently to the underside of the countertop and gently warm the surface 20-25 degrees above room temperature. The location of the heater tail (which connects the heater to the transformer) is predetermined and is not adjustable.  Comes with a step-down plug-in transformer (which converts the 120 VAC input voltage to 24 VAC) and a Surface Prep Kit for installation on rough under-counter surfaces. Please note that standard countertop heaters will ship 2-3 business days after they are ordered.  If you wish to add a control option to a standard countertop heater, you can purchase a Thermal Control Unit (CTH-TCU), sold separately, which has six individual operating settings.    *FeelsWarm® technology is a registered trademark of Heated Stone Products, patent pending.

Eliminate the cold feel of granite, marble, and stone countertops by providing warm, radiant heat with a WarmlyYours FeelsWarm®* standard countertop heater. Ultra-low-profile and virtually invisible, this 11” x 48” heater makes comfortable warmth an option even for smaller sections of your counter space. Conveniently sized to heat an individual area, these standard heaters can be used individually or in combination with others to cover larger sections. The WarmlyYours FeelsWarm® standard countertop heaters adhere discreetly and permanently to the underside of the countertop and gently warm the surface 20-25 degrees above room temperature. The location of the heater tail (which connects the heater to the transformer) is predetermined and is not adjustable.  Comes with a step-down plug-in transformer (which converts the 120 VAC input voltage to 24 VAC) and a Surface Prep Kit for installation on rough under-counter surfaces. Please note that standard countertop heaters will ship 2-3 business days after they are ordered.  If you wish to add a control option to a standard countertop heater, you can purchase a Thermal Control Unit (CTH-TCU), sold separately, which has six individual operating settings.    *FeelsWarm® technology is a registered trademark of Heated Stone Products, patent pending.

Eliminate the cold feel of granite, marble, and stone countertops by providing warm, radiant heat with a WarmlyYours FeelsWarm®* standard countertop heater. Ultra-low-profile and virtually invisible, this 11” x 64” heater makes comfortable warmth an option even for smaller sections of your counter space. Conveniently sized to heat an individual area, these standard heaters can be used individually or in combination with others to cover larger sections. The WarmlyYours FeelsWarm® standard countertop heaters adhere discreetly and permanently to the underside of the countertop and gently warm the surface 20-25 degrees above room temperature. The location of the heater tail (which connects the heater to the transformer) is predetermined and is not adjustable.  Comes with a step-down plug-in transformer (which converts the 120 VAC input voltage to 24 VAC) and a Surface Prep Kit for installation on rough under-counter surfaces. Please note that standard countertop heaters will ship 2-3 business days after they are ordered.  If you wish to add a control option to a standard countertop heater, you can purchase a Thermal Control Unit (CTH-TCU), sold separately, which has six individual operating settings.    *FeelsWarm® technology is a registered trademark of Heated Stone Products, patent pending.

The Elements Towel Warmer by WarmlyYours offers a stylish 4-bar configuration making it perfect for any bathroom in your home. The sleek, classic serpentine loop design allows towels to slide on and off easily. Simply elegant, with a beautifully polished chrome finish, this high quality wall mount unit will keep your towels warm and dry.

• 120 volts, 150 watts, 1.25 amps
• Plug In, Built-in On/Off Switch
• Chrome, Stainless steel
• Item Dimensions: 30"L x 18"W x 8"H
• UL Listed, 2-year manufacturer warranty

Perfect for larger rooms and open layout floor plans, the WarmlyYours 240V 1.5 feet X 70.0 feet Environ™ Flex Rolls may be cut and turned at 90° or 180° to fit any room. The ultra-thin (only 1/16"), non-adhesive foil rolls are safe and easy to install. Yielding 12 watts per square foot, the evenly spaced internal heating cable provides wall-to-wall warmth for your carpet (U.S. only), laminate, engineered wood, and floating wood floors. WarmlyYours is there from start to finish, helping you plan your project, offering 24/7 installation and technical support, and providing a 5-year No Nonsense Warranty for Environ™ Flex Rolls.

• Full coverage for any size space, commonly installed beneath carpet, floating wood or laminate
• 12 watts per square foot
• Item Dimensions: 70'L x 18"W x 1/8" H
• 24/7 Technical Support, Installation plan available per request. UL, CUL (under Laminate and Engineered wood only- NO carpet) Listed, 5 Year Warranty

Perfect for larger rooms and open layout floor plans, the WarmlyYours 240V 1.5 feet X 80.0 feet Environ™ Flex Rolls may be cut and turned at 90° or 180° to fit any room. The ultra-thin (only 1/16"), non-adhesive foil rolls are safe and easy to install. Yielding 12 watts per square foot, the evenly spaced internal heating cable provides wall-to-wall warmth for your carpet (U.S. only), laminate, engineered wood, and floating wood floors. WarmlyYours is there from start to finish, helping you plan your project, offering 24/7 installation and technical support, and providing a 5-year No Nonsense Warranty for Environ™ Flex Rolls.

• Full coverage for any size space, commonly installed beneath carpet, floating wood or laminate
• 12 watts per square foot
• Item Dimensions: 80'L x 18"W x 1/8" H
• 24/7 Technical Support, Installation plan available per request. UL, CUL (under Laminate and Engineered wood only- NO carpet) Listed, 5 Year Warranty

The WarmlyYours Environ™ electric floor heating system, featuring innovative, ultra-thin foil technology, is specifically designed for installation under carpet (U.S. only), laminate, engineered wood, and floating wood flooring. These 240V1.5 feet x 60.0 feet rolls provide 90.0 sq.ft. of coverage. Environ™ Flex Rolls are C-UL-US Listed and provide 12 watts per square foot for energy-efficient comfort. Installation is simple, as they do not require an adhesive and may be cut and turned at 90° or 180° to fit any room. WarmlyYours Environ™ Flex Rolls are fully backed by a 5-Year No Nonsense™ Warranty.

• Full coverage for any size space, commonly installed beneath carpet, floating wood or laminate
• 12 watts per square foot
• Item Dimensions: 60'L x 18"W x 1/8" H
• 24/7 Technical Support, Installation plan available per request. UL, CUL (under Laminate and Engineered wood only- NO carpet) Listed, 5 Year Warranty

Perfect for larger rooms and open layout floor plans, the WarmlyYours 240V 1.5 feet X 90.0 feet Environ™ Flex Rolls may be cut and turned at 90° or 180° to fit any room. The ultra-thin (only 1/16"), non-adhesive foil rolls are safe and easy to install. Yielding 12 watts per square foot, the evenly spaced internal heating cable provides wall-to-wall warmth for your carpet (U.S. only), laminate, engineered wood, and floating wood floors. WarmlyYours is there from start to finish, helping you plan your project, offering 24/7 installation and technical support, and providing a 5-year No Nonsense Warranty for Environ™ Flex Rolls.

• Full coverage for any size space, commonly installed beneath carpet, floating wood or laminate
• 12 watts per square foot
• Item Dimensions: 90'L x 18"W x 1/8" H
• 24/7 Technical Support, Installation plan available per request. UL, CUL (under Laminate and Engineered wood only- NO carpet) Listed, 5 Year Warranty

Sometimes huge performance comes in small packages, which is perfectly embodied by the Grande 10 towel warmer from WarmlyYours. The compact profile of this model means it can be installed in a wide variety of locations, while its heat output of 460 BTUs per hour stands toe-to-toe with nearly any electric towel warmer on the market. The broad bars of the Grande 10 offer extra surface area for expedient heating and the design incorporates a spacing that allows the top pair of bars to perfectly accommodate hand towels. The matte black finish of the Grande 10 serves as a visually striking compliment to the lighter colors used in contemporary bathroom design. This model comes with built-in TempSmart™ protection to prevent the unit from overheating.

High-performance heating and stunning design aesthetics are perfectly combined in the Grande 12 towel warmer from WarmlyYours. With its 12 heated bars, the Grande 12 is one of the most powerful towel warmers for its size with a heat output of 597 BTUs per hour. The flat bars of this model create a large amount of surface area to warm and dry your towels and bathrobes. The wall-mounted Grande 12 is hardwired (110-120 VAC) which means there will not be any visible wires or plugs when its installed. The matte black finish of this model provides a visually striking element to any room. This model comes with built-in TempSmart™ protection to prevent the unit from overheating.

The Hardwired Programmable Timer from WarmlyYours is a classic control option for towel warmers or radiant panels. With the ability to program up to 50 separate on/off events throughout the week, this timer control is a great way to both customize your comfort level and to maximize energy savings. This model comes with an easy-to-read backlit LCD screen. It also features an astronomical clock that can be programmed to your timezone’s sunrise/sunset times.   Features: Easy-to-program with up to 50 on/off events possibleComes with a white wall-plate and 3 interchangeable faceplates: white (installed), ivory, and light almondThe LCD backlit display is easy to read in low-light environmentsHardwired 120 VAC electrical connectionCan be used to control hardwired towel warmers or radiant panels Safe: cCSAus listed5-year limited warrantyLifetime technical support from WarmlyYours  

The Hardwired WiFi Switch from WarmlyYours is an elegant and convenient control option for towel warmers or radiant panels. This WiFi enabled control opens a variety of possibilities for how you operate your device. You can use it manually in-person like a traditional light switch or you can operate it remotely with your smart device. Additionally, this control can be partnered with various home automation systems like the Nest thermostat, Amazon’s Alexa, or Google Assistant. You can also use the free “My Leviton” app to set a schedule for your radiant heating device. There’s no automation hub required and the sleek design means this control presents a streamlined appearance when installed. Features:  Works with Amazon’s Alexa, Google Assistant, or the Nest thermostat (no hub required)Can be controlled/programmed remotely via a smart deviceComes with 2 interchangeable faceplates: white (installed) and light almondHardwired 120 VAC electrical connectionCan be used to control hardwired towel warmers or radiant panels Safe: cCSAus listed5-year limited warrantyLifetime technical support from WarmlyYours  

noneImagine stepping out of the shower every morning and being able to use fresh-from-the-dryer towels. Now imagine not having to throw your towels in the dryer every morning or run to the laundry room after your shower. The WarmlyYours Infinity electric towel warmer allows you to do just that. With ten bars, this towel rack is convenient and versatile, with enough space for 2 large towels to be warmed at one time. The Infinity towel warmer is made of stainless steel and features a beautiful brushed-metal finish. This model has ten sleek bars, from which you can hang your towels or bathrobe for a cozy, luxurious experience every day. Step out of the shower or bath every day and wrap yourself in freshly-warmed towels. This towel warmer is also dual connection, meaning it can be used “as is” to plug into a standard 120 VAC outlet or it can be modified by a licensed electrician to have a hardwired 120 VAC electrical connection. And when this towel warmer is installed with a hardwired electrical connection, its unique design means there is no unattractive and cumbersome cover plate required. Additionally, this towel warmer is extremely safe and is cETLus listed. The Infinity comes with an LED power switch and TempSmart™ overheat protection to prevent the unit’s surface temperature from exceeding 176°F (80°C). The Infinity is covered by our 2-year manufacturer’s warranty for peace of mind. Optional towel warmer controls sold separately. Features: Dimensions: 23.6" (600 mm) W x 32" (813 mm) H x 4.75" (121 mm) D150 watts, heat output of 512 BTUs per hour10 heated straight barsBrushed finish, 304-stainless steel constructionDual connection (120 VAC) can be used plug-in or hardwired (with modification)Integrated power switch with indicator lightSafe: cETLus listed with built-in overheat protectionWarranty: 2 yearsLifetime technical support from WarmlyYours

Imagine stepping out of the shower every morning and being able to use fresh-from-the-dryer towels. Now imagine not having to throw your towels in the dryer every morning or run to the laundry room after your shower. The WarmlyYours Infinity electric towel warmer allows you to do just that. With ten bars, this towel rack is convenient and versatile, with enough space for 2 large towels to be warmed at one time. The Infinity towel warmer is made of stainless steel and features a beautiful black finish. This model has ten sleek bars, from which you can hang your towels or bathrobe for a cozy, luxurious experience every day. Step out of the shower or bath every day and wrap yourself in freshly-warmed towels. This towel warmer is also dual connection, meaning it can be used “as is” to plug into a standard 120 VAC outlet or it can be modified by a licensed electrician to have a hardwired 120 VAC electrical connection. And when this towel warmer is installed with a hardwired electrical connection, its unique design means there is no unattractive and cumbersome cover plate required. Additionally, this towel warmer is extremely safe and is cETLus listed. The Infinity comes with an LED power switch and TempSmart™ overheat protection to prevent the unit’s surface temperature from exceeding 176°F (80°C). The Infinity is covered by our 2-year manufacturer’s warranty for peace of mind. Optional towel warmer controls sold separately. Features: Dimensions: 23.6" (600 mm) W x 32" (813 mm) H x 4.75" (121 mm) D150 watts, heat output of 512 BTUs per hour10 heated straight barsBlack finish, 304-stainless steel constructionDual connection (120 VAC) can be used plug-in or hardwired (with modification)Integrated power switch with indicator lightSafe: cETLus listed with built-in overheat protectionWarranty: 2 yearsLifetime technical support from WarmlyYours

Imagine stepping out of the shower every morning and being able to use fresh-from-the-dryer towels. Now imagine not having to throw your towels in the dryer every morning or run to the laundry room after your shower. The WarmlyYours Infinity electric towel warmer allows you to do just that. With ten bars, this towel rack is convenient and versatile, with enough space for 2 large towels to be warmed at one time. The Infinity towel warmer is made of stainless steel and features a beautiful polished finish. This model has ten sleek bars, from which you can hang your towels or bathrobe for a cozy, luxurious experience every day. Step out of the shower or bath every day and wrap yourself in freshly-warmed towels. This towel warmer is also dual connection, meaning it can be used “as is” to plug into a standard 120 VAC outlet or it can be modified by a licensed electrician to have a hardwired 120 VAC electrical connection. And when this towel warmer is installed with a hardwired electrical connection, its unique design means there is no unattractive and cumbersome cover plate required. Additionally, this towel warmer is extremely safe and is cETLus listed. The Infinity comes with an LED power switch and TempSmart™ overheat protection to prevent the unit’s surface temperature from exceeding 176°F (80°C). The Infinity is covered by our 2-year manufacturer’s warranty for peace of mind. Optional towel warmer controls sold separately.

The RLY-12PL large relay panel is an ultra-silent, power-switching panel suitable for snow melting, slab heating and roof deicing applications. Housed in a NEMA 1 indoor enclosure, this large panel is C-UL-US approved and rated for up to 24 amps. The RLY-12PL panels can be used with 120, 208, 240 or 277 Vac cables and equipped with clearly labeled terminals for ease of wiring.

These quiet, load-switching panels are ideally suited for snow melting cables and mats, as well as slab heating and roof deicing applications. The medium-sized RLY-8PL power relays are rated for up to 24 amps, and housed in NEMA 1 indoor enclosures, and designed for use with 120, 208, 240 or 277 Vac cables. All components of the RLY-8PL medium relay panels are C-UL-US approved. The panel’s terminals are clearly labeled for ease of installation.

The Metropolitan is one of our most popular towel warmers for good reasonùthis model represents the fusion of stunning modern design aesthetics with cutting edge towel warmer technology. With this towel warmerÆs polished finish and crisp, strong lines, the Metropolitan makes an immediate visual impact in any room. With two groups of five heated bars, this towel warmer has more than enough room to accommodate two large towels (or a bathrobe) to warm or dry them in between uses. The Metropolitan is made from durable stainless steel with a highly polished finish that is both attractive and easy to clean.

The Metropolitan is also dual connection, meaning it can be used ôas isö to plug into a standard 120 VAC outlet or it can be modified by a licensed electrician to have a hardwired 120 VAC electrical connection. When the Metropolitan is installed with a hardwired electrical connection, its unique design means there is no unattractive and cumbersome cover plate required. Additionally, this towel warmer is extremely safe and is cETLus listed. The Metropolitan comes with an LED power switch and TempSmartÖ overheat protection to prevent the unitÆs surface temperature from exceeding 176¦F (80¦C). The Metropolitan is covered by our 2-year manufacturerÆs warranty for peace of mind.

Optional towel warmer controls sold separately.

Feature:

• Dimensions: 19.75" (502 mm) W x 41.5" (1,054 mm) H x 4.75" (121 mm) D
• 150 watts, heat output of 512 BTUs per hour
• 10 heated straight bars
• Polished finish, 304-stainless steel construction
• Dual connection (120 VAC) can be used plug-in or hardwired (with modification) and Integrated power switch with indicator light

Like floor heating itself, the programmable nHance thermostat represents a harmonious blend of style and usability. Its modern design incorporates a large, backlit display that makes it easy to read in low light areas. This dual voltage (120V/240V) control, with built-in self-testing GFCI, comes with pre-programmed settings for ultra-fast installs. With its intuitive user-interface, you can easily set the nHance up for your exact needs and specifications. If you have a consistent schedule, this programmable thermostat will deliver a maximum level of comfort when you need it most, like during your morning routine, while still keeping your overall energy use to a minimum. Includes floor sensor. Pre-programmed for quick set up7-day programmableFeatures "child-lock" functionEnergy Log for tracking useWorks with hardwired WarmlyYours radiant panels3-year warranty

Some floor heating jobs are just too large for a single radiant heating thermostat to handle alone. The nJoin power module is here to help you heat those larger projects. The refined and modern-looking nJoin links up to any WarmlyYours thermostat in the nSpiration series (nSpire Touch WiFi, nSpire Touch, nHance, or nTrust) to increase the electrical output in 15 amp increments to allow for heating additional areas or large rooms, like basements, with a single thermostat. Screw terminals for safe and easy installs 3-year warrantyBuilt-in self-testing GFCIDual voltage: 120 V and 240 Vc-UL-us Class A approved

Finally, a radiant heating thermostat that looks as good as floor heating feels. This version comes with a black faceplate which can blend easily with darker walls or make a bold statement against lighter ones. The programmable nSpire Touch features a 3.5” full color touchscreen and a modern design that instantly augments any room’s style. With an integrated Install Wizard, it’s never been easier to set up a radiant heating system according to your preferences and schedule. The nSpire Touch allows you maximum control over the floor temperature with 4 programmable events for each day of the week, which is great for “Goldilocks households” where there will be frequent adjustments to the temperature or thermostat’s schedule until it’s “just right.” This dual voltage (120V/240V) thermostat puts the control where it belongs, at your fingertips. Includes a 10k ohms floor sensor with 15' lead.

Finally, a radiant heating thermostat that looks as good as floor heating feels. This version comes with a white faceplate that allows the unit to blend seamlessly with a large variety of room designs. The programmable nSpire Touch features a 3.5” full color touchscreen and a modern design that instantly augments any room’s style.With an integrated Install Wizard, it’s never been easier to set up a radiant heating system according to your preferences and schedule. The nSpire Touch allows you maximum control over the floor temperature with 4 programmable events for each day of the week, which is great for “Goldilocks households” where there will be frequent adjustments to the temperature or thermostat’s schedule until it’s “just right.” This dual voltage (120V/240V) thermostat puts the control where it belongs, at your fingertips. Includes a 10k ohms floor sensor with 15' lead.

Due to its WiFi capabilities, this programmable thermostat, with built-in self-testing GFCI, allows you to control your floor heating system with your smartphone or on the web. If you have a busy schedule, the nSpire Touch WiFi+s ability to be controlled remotely can translate into huge energy savings without sacrificing comfort or convenience. - With its crystal-clear 3.5+ full color touchscreen display, the dual voltage (120V/240V) nSpire Touch WiFi is as easy to operate as it is to look at. The integrated Install Wizard and easy-programming options make set up a breeze. This model provides maximum control over the floor temperature with 4 programmable events for each day of the week. Also includes floor sensor. WiFi enables remote operation3.5+ TouchscreenEnergy Log for tracking useFeatures "child-lock" functionWorks with hardwired WarmlyYours radiant panels3-year warranty

Enjoying the comfort of radiant heating has never been easier. The nonprogrammable nTrust thermostat delivers both ease and reliability. Its sleek, minimalist appearance, featuring a large backlit display for ease of reading in low light, compliments nearly any interior design theme. Because there is no programming required for this dual voltage (120V/240V) control, you can just set it for your desired temperature and then sit back and relax. This elegant piece of wall-candy is perfect for high-traffic rooms, like the living room, where you want to keep the temperature at a consistent level throughout the day. Includes floor sensor. Large, easy-to-read displayEnergy Log for tracking useWorks with hardwired WarmlyYours radiant panelsBuilt-in self-testing GFCI3-year warranty

The AIR-SS Aerial-Mounted Snow Sensor provides versatile and cost-effective automatic snow detection for snow melting and roof and gutter deicing systems. Easy to install, the AIR-SS Aerial-Mounted Snow Sensor is appropriate for use with the SCP-120 and SCA-DUAL controls. It senses both ambient temperature and precipitation, detecting falling or blowing snow at temperatures below 38°F (3.3°C). The included 12-inch, 3-conductor, 18 AWG lead allows for flexibility of installation, allowing sensors to be located up to 2,000 ft. (609.6 m) from the control panel.