Shop by Brand: Scandvik

11.5" x 7" Cylindrical Sink - Mirror Finish

This is a cylindrical sink with a mirror finish, and it's made of 18/10 stainless steel.

Specifications:

• Flange Profile: A
  • Flange Width: 3/4 in.
  • Depth: 5 in.
  • Drain Opening: 2-1/16 in.
  • Shipping Weight: 7 lbs

16" Scan-Strip 4 Color LED Light - RGBW

This 4-color scan-strip RGBW LED builds on the popularity of the original single-color scan-strip LED. Simple 2-wire connections with any on/off switch are all that is required to cycle from white to blue to red to green.

Features:

• Switching off for more than 4 seconds resets the color to white
• RGBW LEDs
• Colors are daylight white (4000-4500K), blue, red, green
• Lifespan 30,000+ Hours
• 12/24 Volt
• IP65 can be installed in engine rooms and exterior locations
• Ideal for under-gunwale lighting
• SS Mounting Screws Included

Specifications:

• Beam Angle: 120° 
• Watts: 2.4
• Lumens: 180
• Dimensions (L X W x H) (inch): 16" x 7/8" x 1/2"

*The "P" within the part number indicates retail packaging

20" Scan-Strip 4 Color LED Light - RGBW

This 4-color scan-strip RGBW LED builds on the popularity of the original single-color scan-strip LED. Simple 2-wire connections with any on/off switch are all that is required to cycle from white to blue to red to green.

Features:

• Switching off for more than 4 seconds resets the color to white
• RGBW LEDs
• Colors are daylight white (4000-4500K), blue, red, green
• Lifespan 30,000+ Hours
• 12/24 Volt
• IP65 can be installed in engine rooms and exterior locations
• Ideal for under-gunwale lighting
• SS Mounting Screws Included

Specifications:

• Beam Angle: 120° 
• Watts: 3.1
• Lumens: 234
• Dimensions (L X W x H) (inch): 20" x 7/8" x 1/2"

*The "P" within the part number indicates retail packaging

4" LED Light Strip - Blue with Gasket - 12V

This is a multi-use 4" light. The heavy-duty polycarbonate housing offers robust protection from the elements. The light includes a molded rubber gasket that routes the hook-up wires (positive/negative) to one side of the fixture. Can also be installed without the gasket, with the hook-up wires routed straight back through the mounting surface. A diamond-cut lens disperses light evenly. A sealed fixture can be installed under gunnels, in lockers/closets, in consoles, in companionways, or for step illumination.

Features:

• 12VDC, 1.2W
• 6 EA Blue 2835 LEDs
• IP67

*The "P" within the part number indicates retail packaging

4" LED Light Strip - White with Gasket - 12V

This is a multi-use 4" light. The heavy-duty polycarbonate housing offers robust protection from the elements. The light includes a molded rubber gasket that routes the hook-up wires (positive/negative) to one side of the fixture. Can also be installed without the gasket, with the hook-up wires routed straight back through the mounting surface. A diamond-cut lens disperses light evenly. A sealed fixture can be installed under gunnels, in lockers/closets, in consoles, in companion ways, or for step illumination.

Features:

• 12VDC, 1.2W
• 6 EA 2835 LEDs
• Daylight white (4500K)
• IP67

*The "P" within the part number indicates retail packaging

4" Locker Light with Motion Sensor - 10-30V - Stainless Steel

This compact locker light is small enough to mount almost anywhere where light is needed. Designed to illuminate the inside of lockers, hatches, closets, and/or bilges. The light will automatically turn on when you open the hatch or door. The sensor immediately turns on the light when triggered by a combination of movement within 6 feet and a temperature of 98 degrees. The light will shut off after 20 seconds unless there is movement.

Features:

• IP65 rated for installation in wet lockers
• Works with 12V and 24V systems
• Impact-resistant plastic lens
• 316 Stainless Steel Trim Ring
• 6 Warm White LEDs (2900-3200K)
• Surface mount, 2 SS Screws included
• 10-30V

Specifications:

• Amps: 0.03
• Lumens: 210

*The "P" within the part number indicates retail packaging

4" Locker Light with Touch Switch - 10-30V - Stainless Steel

This compact locker light is small enough to mount almost anywhere where light is needed. Designed to illuminate the inside of lockers, hatches, closets, and/or bilges. The light features a 316 stainless steel trim ring and a built-in on/off switch that is backlit with a blue LED so that it is easily located even in the darkest of lockers. A touch-switch sensor immediately turns on the light when activated.

Features:

• IP65 rated for installation in wet lockers
• Works with 12V and 24V systems
• Impact-resistant plastic lens
• 316 Stainless Steel Trim Ring
• 6 Warm White LEDs (2900-3200K)
• Surface mount, 2 SS Screws included

Specifications:

• 10-30V
• Amps: 0.03
• Lumens: 210

*The "P" within the part number indicates retail packaging

5" Dome Light with Switch & 3 Stage Dimming - 10-30V - IP67

The LED technology used in this light provides a uniform output and eliminates hot spots common among LEDs. A touch-sensitive switch provides three-stage dimming. The brightest, mid-level, and low settings easily adjust with a touch of the on/off button. The on/off button illuminates blue to help locate it in the dark.

Features:

• 12/24V
• 51 x 0.5-watt LEDs
• Natural White (4250K)
• 720 effective lumens
• Plastic housing with a high-impact plastic lens
• Surface mount, 3 stainless steel screws Included
• IP67

*The "P" within the part number indicates retail packaging

7" Oval Dome Light with Switch & Dimming - 12/24V

The LED technology used in this light provides a uniform output and eliminates hot spots common among LEDs. A touch-sensitive switch provides three-stage dimming. The brightest, mid-level, and low settings easily adjust with a touch of the on/off button. The on/off button illuminates blue to help locate it in the dark.

Features:

• 12/24V
• 42 x 0.5-watt 2835 LEDs
• Natural White (4250K)
• 680 Effective Lumens
• Plastic housing with a high-impact plastic lens
• Surface mount, 3 stainless steel screws Included
• IP67

*The "P" within the part number indicates retail packaging

8" LED Light Strip - Blue with Gasket - 12V

This is a multi-use 8" light. The heavy-duty polycarbonate housing offers robust protection from the elements. The light includes a molded rubber gasket that routes the hook-up wires (positive/negative) to one side of the fixture. Can also be installed without the gasket, with the hook-up wires routed straight back through the mounting surface. A diamond-cut lens disperses light evenly. A sealed fixture can be installed under gunnels, in lockers/closets, in consoles, in companionways, or for step illumination.

Features:

• 12VDC, 3W
• 15 EA Blue 2835 LEDs
• IP67

*The "P" within the part number indicates retail packaging

8" LED Light Strip - White with Gasket - 12V

This is a multi-use 8" light. The heavy-duty polycarbonate housing offers robust protection from the elements. The light includes a molded rubber gasket that routes the hook-up wires (positive/negative) to one side of the fixture. Can also be installed without the gasket, with the hook-up wires routed straight back through the mounting surface. A diamond-cut lens disperses light evenly. A sealed fixture can be installed under gunnels, in lockers/closets, in consoles, in companionways, or for step illumination.

Features:

• 12VDC, 3W
• 15 EA 2835 LEDs
• Daylight white (4500K)
• IP67

Specifications:

• Lumens: 176

*The "P" within the part number indicates retail packaging

8" Scan-Strip 4 Color LED Light - RGBW

This 4-color scan-strip RGBW LED builds on the popularity of the original single-color scan-strip LED. Simple 2-wire connections with any on/off switch are all that is required to cycle from white to blue to red to green.

Features:

• Switching off for more than 4 seconds resets the color to white
• RGBW LEDs
• Colors are daylight white (4000-4500K), blue, red, green
• Lifespan 30,000+ Hours
• 12/24 Volt
• IP65 can be installed in engine rooms and exterior locations
• Ideal for under-gunwale lighting
• SS Mounting Screws Included

Specifications:

• Beam Angle: 120° 
• Watts: 1.2
• Lumens: 94
• Dimensions (L X W x H) (inch): 8-7/8" x 7/8" x 1/2"

*The "P" within the part number indicates retail packaging

A2.5 4 Color Downlight with Stainless Steel Trim - 8-30V

Scandvik’s A2.5 LED Down Light with class-leading output, sealed weatherproof construction, and simple 2-wire installation is a favorite amongst boatbuilders. Intelligent circuitry allows color changes from white to blue, red, and green without specialized switches or controllers. Only a simple 2-position (on/off) toggle switch is needed. Switch the light off and on again within 1.5 seconds to cycle through each of the four colors. Turning the light off for more than 1.5 seconds resets the light to white.

Features:

• Easy to install, spring-loaded butterfly clips hold the A2.5 firmly in place
• Works on 12V & 24V systems
• The light colors are white, blue, red, and green
• 2 in. mounting hole
• Recessed mount with spring clips
• 286 lumens
• IP67

Applications:

• This 316 stainless steel fixture is suitable for overhead exterior locations such as T-tops, hard tops, and mezzanines

*The "P" within the part number indicates retail packaging

A3 Downlight - Surface/Flush Mount - Stainless Steel

This Scandvik A3 Surface Mounted LED Down Light is a single-color light. This A3 Surface Mount Series light features a snap-over bezel in Polished 316 stainless steel and a surface mount collar in a matching color. The A3 mounts securely overhead using two screws. Single-color lights have a two-wire (positive/negative) connection and work with a common switch (on/off). 

Features:

• 316 stainless steel trim
• 6 x 0.5-watt warm white LED
• 242 Lumens
• 2.2 Watt
• 12 Volt  
• IP67

Applications:

• A3s are a good choice for general overhead lighting on smaller boats or as undercabinet lighting for any size vessel
• Other applications include hard tops, arches, walkway overhangs, shower stalls, or any area that lacks the depth to recess mount a fixture

*The "P" within the part number indicates retail packaging

A3C Downlight Kit - Cool White with Stainless Steel, White, & Black Trim Rings

Scandvik’s A3C LED Down Lights add the convenience of spring-loaded butterfly installation clips and are offered as single or dual-color lights that can be dimmed when paired with the Tortuga PWM dimmer. A3C features a snap-over bezel in Polished 316SS, white, or Black polycarbonate.

Features:

• Cool white (includes stainless steel, white, and black trim rings)
• 12 Volt - 2.8 Watt
• 12 pieces LEDs
• 300 Lumens
• IP67

Applications:

• It is a good choice for general lighting in the headliner or as under-cabinet lighting for any size vessel
• Other applications include hard tops, arches, walkways, overhangs, and shower stalls

*The "P" within the part number indicates retail packaging

A3C Downlight Kit - Warm White with Stainless Steel, White, & Black Trim Rings

Scandvik’s A3C LED Down Lights add the convenience of spring-loaded butterfly installation clips and are offered as single or dual-color lights that can be dimmed when paired with the Tortuga PWM dimmer. A3C features a snap-over bezel in Polished 316SS, white, or Black polycarbonate.

Features:

• Warm white (includes stainless steel, white, and black trim rings)
• 12 Volt - 2.8 Watt
• 12 pieces LEDs
• 300 Lumens
• IP67

Applications:

• It is a good choice for general lighting in the headliner or as under-cabinet lighting for any size vessel
• Other applications include hard tops, arches, walkways, overhangs, and shower stalls

*The "P" within the part number indicates retail packaging

All in One Shower System - 28" Shower Rail

This unique sliding rail shower system combines a 28-inch-long shower rail with an integrated mixer, hose, and shower handle all in one. Installation requires the hot and cold water supplies to be connected to the top and bottom mounting system of the rail.

Features:

• The rail is then snapped onto the quick-connect fittings at the top and bottom
• The complete system can be disconnected in seconds and put away if necessary

Specifications:

• Water Connection: (2) 1/2 in. NPS threaded pipe
• Material: Chrome-plated brass rail and shower handle
• Mounting Holes: (2) 7/8 in.
• Shipping Weight: 10 lbs.

B3 Downlight Surface Mount - Blue - SS Trim - IP67 - 12/24V

Scandvik’s low profile B3 (3/8 in. height) surface-mounted, single-color downlight is manufactured to be simple and budget-friendly. The polished stainless steel snap-over trim ring is a nice upgrade from the inferior chrome plastic bezels of the past. The fixture is popular as a T-Top light because it looks like a flush-mount light without the hassle of cutting holes.

Features:

• The light color is blue
• 13 Lumens
• 10-30 VDC
• 1 Watt
• IP67

*The "P" within the part number indicates retail packaging

B3 Downlight Surface Mount - Cool White - SS Trim - IP67 - 12/24V

Scandvik’s low profile B3 (3/8 in. height) surface-mounted, single-color downlight is manufactured to be simple and budget-friendly. The polished stainless steel snap-over trim ring is a nice upgrade from the inferior chrome plastic bezels of the past. The fixture is popular as a T-Top light because it looks like a flush-mount light without the hassle of cutting holes.

Features:

• The light color is cool white
• 95 Lumens
• 10-30 VDC
• 1 Watt
• IP67

*The "P" within the part number indicates retail packaging

Black & Stainless Steel Recessed Transom Shower Handle/Hose - Vertical/Horizontal Mount - 6' Hose

This recessed shower cap with composite cup mounts vertically or horizontally. Ideal as a deck or transom shower.

Features:

• Push-Button sprayer
• ABS handle with an attached lanyard for easy pull-out
• Mounting hardware is included
• Black with 6 ft. black nylon hose

Specifications:

• Water Connection: 3/8 in. BSP-F threaded fitting on the hose 
• Mounting Hole: 2-3/4 in. diameter
• Shipping Weight: 4 lbs.

*The "P" within the part number indicates retail packaging

Black Cap & Container for Scandvik Recessed Shower

This part is a replacement cup and cap for horizontally mounted recessed showers.

Features:

• These caps have a shower symbol on top
• Black cap and cup

Specifications:

• Mounting Hole: 2-1/4 in.

*The "P" within the part number indicates retail packaging

Bracket Mount LED Spreader Light - White

Scandvik's bracket-mount LED Spreader Light is the perfect solution to illuminate your deck or cockpit. Featuring five daylight white 3W LEDs providing 900 effective lumens, A white Zytel® composite housing was designed specifically for the rigors of the marine environment. 

Features:

• An adjustable stainless steel bracket mounting solution allows the light to be aimed where it is needed most
• Guaranteed against corrosion, discoloration, and water intrusion
• Comparable to a 120-watt Halogen bulb.
• 12/24 volts (8-30 volts)
• UV-resistant Zytel® Nylon Resin housing
• Polycarbonate Lens
• IP68

*The "P" within the part number indicates retail packaging

Brushed Stainless Steel Oval Sink - 13.25" x 10.5"

This oval basin is 10 x 13 in. and is brushed-finished with a large (1 in.) flange.

Specifications:

• Material: 18/8 stainless steel 
• Flange Profile: A
• Flange Width: 1 in.
• Depth: 5 in.
• Drain Opening: 1-11/16 in.
• Shipping Weight: 5 lbs.

Ceramic Angled Washdown Valve - Stainless Steel Spigot

This part is an angled washdown with a 316 Stainless Steel spigot.

Features:

• Mounts easily with 3 #6 screws to the bulkhead
• 1/4 turn ceramic valve.
• Standard 3/4 in. garden hose thread for hose attachment Includes interchangeable fresh and raw pendant

Specifications:

• Water Connection: 1/2 in. NPT-F
• Flange Diameter: 2-3/8 in.
• Shipping Weight: 2 lbs.

*The "P" within the part number indicates retail packaging

Ceramic Family Tap with Folding Spout - Chrome Finish

Folding cold water tap with a high-reach swivel and folding spout. This particular part has a chrome finish.

Specifications:

• Water Connection (inch): 3/8" BSP-M threaded shaft (1/2" NPS-M adapters included)
• Material: Solid brass with a chrome finish
• Mounting Hole (inch): 5/8"
• Shipping Weight: 3 lbs.

*The "P" within the part number indicates retail packaging

Chrome Compact Shower Control Mixer - Single Lever

This part is a compact single-lever shower mixer.

Features:

• Flexible 3/8 in. BSP-M output line for hose connection

Specifications:

• Water Connection: Flexible supply lines with 1/2 in. NPS-F fittings
• Material: Chrome-plated brass
• Mounting Hole: 1-1/4 in.
• Shipping Weight: 3 lbs.

*The "P" within the part number indicates retail packaging

Chrome Folding Spout Mixer

Compact folding mixer with a high-reach spout. 

Features:

• Chrome finish
• Spout is about 5.75 in. tall
• Can 90 degrees one way or the other. 

Specifications:

• Water Connection: 3/8 in. BSP-M threaded shafts, (1/2 in. NPS-M adapters included)
• Material: Chrome-plated brass
• Mounting Hole: 2 each 5/8 in., 2-5/16 in. center to center
• Shipping Weight: 3 lbs.

*The "P" within the part number indicates retail packaging

Chrome Galley Mixer with Swivel Spout

This Galley mixer is Scandvik's most popular galley mixer design.

Features:

• 1/4 turn ceramic valves
• Swivel spout

Specifications:

• Water Connection: Flexible supply lines with 1/2 NPS-F fittings
• Material: Chrome-plated brass
• Mounting Hole: 1-1/4 in.
• Shipping Weight: 5 lbs.

*The "P" within the part number indicates retail packaging

Combo Shower Sprayer - White

This fixture is perfect for compact bathrooms, as it acts as a basin faucet and a shower in one! 

Features:

• White handle with a 5 ft. white nylon hose
• An adjustable spray aerator lets you choose between faucet flow or shower spray
• The handle features a push button on/off valve to help reduce water usage

Specifications:

• Water Connection: Flexible supply lines with 1/2 in. NPS-F fittings
• Material: Chrome-plated brass faucet body; chrome plated brass knobs; chrome ABS aerator with ABS grip; and chromed brass elbow fitting.
• Mounting Hole: 1-1/2 in.
• Shipping Weight: 6 lbs.

*The "P" within the part number indicates retail packaging

Compact Bracket Mount LED Spreader Light - White

This compact spreader light features 3 each powerful 3W LEDs, comparable to a 75W halogen bulb. Durable Zytel housing is UV resistant and is sure to withstand the elements for many seasons. A stainless steel bracket allows you to direct the light where it is most needed.

Features:

• White housing
• 12/24 Volt, 5 Watt
• Polycarbonate Lens
• 610 Lumens
• IP67

*The "P" within the part number indicates retail packaging

E360 Engine Room Light - 12V - Cool White

The E-3600 is a surface-mounted engine room light. The impact-resistant PC lens allows the wires to exit straight back through the mounting surface or be routed to the side through the end cap. Featuring a total of 36 LEDs, this fixture produces 1,154 lumens, comparable to a 160-watt standard bulb. Drawing a mere 1.1 Amps at 12V, this fixture is often used in multiple quantities to eliminate any dark spots in the engine room.

Features:

• 12 Volt, 13.2 Watt
  • Surface Mount (hardware included)

Specifications:

• LED Quantity: 36 (4 rows of 9 LEDs)
• Lumens: 1,154
• Protection: IP65
• LED Type: SMD5630 cool white (5,500K-6,300K)
• Beam Angle: 180°

*The "P" within the part number indicates retail packaging