0.3M Daisy Chain Cable for Alpha Displays Daisy chain up to four Alpha Performance Displays together to create the ultimate data display. Daisy chain cables attach seamlessly to the back of each display. Features:
|
15M Data Cable for Cyclone Radar Data cable specifically made for Raymarine's Cyclone Radar.
|
15M Digital cable with Raynet connector f/HD & Super HD Color Radar Scanners
|
15M Power Cable for Cyclone Radar Power cable specifically made for Raymarine's Cyclone Radar.
|
B164 Tilted Element
0° Features:
Step up to a 1kW Without a Fairing! Airmar has taken our innovative Tilted Element technology to a higher power. The new 1kW, flush-mount, tilted element transducers are perfect for fast, trailered tournament sport fishing vessels who cannot have a high-performance fairing. The flush mounted, bronze housing protrudes less than 6.35 mm (0.25) outside your hull and can sit on trailer rollers and bunks with no damage at all. The ceramic arrays are tilted inside the housing giving you the perfect vertical beam with maximum energy on what is directly below your boat. Take your fishfinder to the next power with Airmars 1kW tilted element transducers. |
Backbone Cables
In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. |
SeaTalk Interconnect Cable, 3ft. (1m)
SeaTalk Interconnect cable for linking SeaTalk devices SeaTalk interconnect cable for linking SeaTalk devices. Flat style, 3-pin molded connectors on each end. |
Spur Cable
Raymarine 1 meter Spur Cable for SeaTalkng |
Spur Cable
Raymarine 1 meter stripped end Spur Cable for SeaTalkng |
TA118 2-up battery pack and seal kit
|
Backbone Cables
In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. |
SeaTalk Interconnect Cable, 65'
SeaTalk Interconnect cable for linking SeaTalk devices SeaTalk interconnect cable for linking SeaTalk devices. Flat style, 3-pin molded connectors on each end. |
25M Digital Radar Cable w/ Raynet Connector f/HD & Super HD Color Radar Scanners
|
2M Axiom XL Video In & Alarm Cable 2m (6.6 ft) gS Series Video In/Alarm Out cable. |
3-Pin, 12/24V Power Cable - 1.5M f/DSM30/300, CP300, 370, 450, 470 & 570
Features:
Compatible Devices:
|
TA119 3-up Battery Pack and Seal Kit
|
Backbone Cables
In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. |
SeaTalk Interconnect Cable, 9ft. (3m)
SeaTalk Interconnect cable for linking SeaTalk devices SeaTalk interconnect cable for linking SeaTalk devices. Flat style, 3-pin molded connectors on each end. |
Spur Cable
Raymarine 3 meter Spur Cable for SeaTalkng |
Spur Cable
Raymarine 3 meter stripped end Spur Cable for SeaTalkng |
4" Pushrod Extension f/Tiller Pilots
4" pushrod extension for tiller pilots |
4" Tiller Bracket f/Tiller Pilots
4" tiller bracket for tiller pilots allows for horizontal mounting of the tiller pilot when the boat's tiller is higher or lower than the fixed end of the tiller drive. |
Backbone Cables
In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. |
Spur Cable
Raymarine 400MM elbow Spur Cable for SeaTalkng |
Spur Cable
Raymarine 400MM Spur Cable for SeaTalkng |
4m Extension Cable f/CPT-DV & DVS Transducer & Dragonfly 4, 5 & Wi-Fish
Use Raymarine's 4m cable to extend the length of the standard cable provided with Dragonfly CPT-DV and DVS transducers. |
4M Transducer Extension Cable f/CHIRP & DownVision™
Use Raymarine's 4 Meter extension cable when the transducer will not reach you CP100. |
Backbone Cables
In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. |
5M Digital Radar Cable w/RayNet Connector f/HD & Super HD Color Radar Scanners
|
SeaTalk Interconnect Cable, 16ft. 3in. (5m)
SeaTalk Interconnect cable for linking SeaTalk devices SeaTalk interconnect cable for linking SeaTalk devices. Flat style, 3-pin molded connectors on each end. |
Spur Cable
Raymarine 5 meter Spur Cable for SeaTalkng |
Backbone Cables
In a SeaTalkng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every location where an NG or NMEA 2000 device might be installed. Two backbone cable lengths can be joined together by part A06030, a backbone extender. |
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |