Shop by Brand: Lee's Tackle

Flush Mount Rod Holder

RH-527VS Medium 0° Stainless Steel

The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.

Flush Mount Rod Holder

RH-532VS Large 0° Stainless Steel

The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.

Flush Mount Rod Holder

Heavy Duty Bar Pin
All Stainless Steel

RH-527VS/XS Medium 0°

The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.

Flush Mount Rod Holder

Heavy Duty Bar Pin
All Stainless Steel

RH-532VS/XS Large 0°

The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.

Swivel Base Rod Holder

RH577XL

Vertical 0° Extra Long Tube

Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.

Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder.

RH5167V

Vertical 0° Short Tube

Medium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2" OD x 6-1/2" long tube.

Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.

Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder.

Swivel Base Rod Holder

RH577V

Vertical 0°

Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.

Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder.

12' MKII Bright Silver Pole w/Black Spike

1 3/8" diameter

13' Bright Silver/Black Spike - Step Tube 1-3/8" - No Spreader

The Center Rigger has proven to be an effective tool when trolling. It should be the highest outrigger when the others are deployed in the fishing position. Its line runs straight down the middle with its bait being the farthest back. The Center Rigger bait, more often than not, is the one struck after the other baits have streamed by.

Features:

• 13'
  
• Bright Silver/Black Spike
  
• MX Step-tube style
  
• No spreader

Swivel Base Flush Mount Rod Holder
Medium, 15 Degree, Stainless Steel

Without a doubt, our swivel base rod holder is the "Ultimate Rod Holder" for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tip's roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a half inch stainless steel lock nut at the bottom of the rod holder.

Flush Mount Rod Holder

 Bar Pin

All Stainless Steel

RH-534HS/XS Heavy 15°

The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.

Swivel Base Rod Holders

RH579XL

Half Angle 15° Extra Long Tube

Stainless Steel Flush Mount w/ Swivel Base

Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.

Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder.

Flush Mount Rod Holder

RH-529HS Medium 15° Stainless Steel

The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.

Flush Mount Rod Holder

RH-534HS Large 15° Stainless Steel

The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.

Flush Mount Rod Holder

Heavy Duty Bar Pin
All Stainless Steel

RH-529HS/XS Medium 15°

The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.

Swivel Base Rod Holders

RH5169

Half Angle 15° Short Tube

Medium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2" OD x 6-1/2" long tube.

Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.

Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder.

Swivel Base Rod Holders

RH579

Half Angle 15°

Stainless Steel Flush Mount w/ Swivel Base

Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin.

Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder.

16' Extra Strong - Bright Silver Finish - Outrigger Poles

16' Extra Strong Bright Silver Standard Poles Sidewinder

Pole fits Lee Sidewinder holders with a 1-5/8" ID. 16'. Extra strong, aluminum. Bright silver finish with black spike.

16' Extra Strong Poles Bright Silver Sidewinder Only

Lee's Tackle Sidewinder 16' Extra Strong Step Tube outrigger poles - Bright Silver Finish with Black Spike. These outrigger poles have a sleek tappered section.

16' Telescoping Carbon Fiber Outrigger Poles for Sidewinder Mount

Advanced Carbon Composite Telescoping outriggers.  Lee's carbon fiber poles are by far stronger and lighter than any other aluminum pole on the market today.

The perfect solution for trolling a variety of baits. 

Features:

• Light Weight – Makes deployment, retrieval, raising, and lowering a breeze
• Strength – Spreaders become unnecessary
• A glossy clear coat finish is standard

Technical Specifications:

• Length - 16'
• Number of Sections - Four (4)
• Mounting Base - Lee's Sidewinder 1-5/8"
• Rigging – Double rigging 
• Maximum Line Strength – 400 lb. monofilament

*Sold as a Pair

18' Telescoping Carbon Fiber Outrigger Poles for Sidewinder Mount

Advanced Carbon Composite Telescoping outriggers.  Lee's carbon fiber poles are by far stronger and lighter than any other aluminum pole on the market today.

The perfect solution for trolling a variety of baits. 

Features:

• Light Weight – Makes deployment, retrieval, raising, and lowering a breeze
• Strength – Spreaders become unnecessary
• A glossy clear coat finish is standard

Technical Specifications:

• Length - 18'
• Number of Sections - Four (4)
• Mounting Base - Lee's Sidewinder 1-5/8"
• Rigging – Double rigging 
• Maximum Line Strength – 400 lb. monofilament

*Sold as a Pair

18.5' Bright Silver Finish - MKII Outrigger Poles

18.5' Bright Silver Finish - Outrigger Poles

18.5' Bright Silver Pole w/Black Spike Step Tube 1.5"

18.5' bright silver pole with black spike step tube 1.5"

19' Extra Strong - Bright Silver Finish - Outrigger Poles

Gunnel Mount Outrigger Holders

Size: 2.0"
Dimensions: 4 x 6 1/2

Attractive, Strong, and Bullet Proof all describe our Gunnel Mount Outrigger Holders. One piece flange construction. Plate, Tube and Bar-Pin are all cast simultaneously for the ultimate in strength. Curved Tube has Solid End Plug with Deep Slots to assure long service and reliability. Tubes are made with Port and Starboard slot orientation to optimize fishing angle. Flange mounts flush with gunnel. When tube is removed, gunnel is unobstructed. Unit has three positions, straight up Running, angled out Trolling and straight back for Bridge Clearing. Originally designed by Lee's in the 50's and copied by nearly all our competition. However, no one rivals our durability, fit & finish. Chrome on Brass construction.

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Side Mount Outrigger Holders

OH2020S

Size: 2.0"
Dimensions: 4 3/4 x 7 1/2

Side Mount Bracket utilizes same curved tube as Gunnel Mount. One piece Bracket construction. Tube, Feet and Bar-Pin are all cast simultaneously for the ultimate in strength. Unit provides same three positions as Flush Mount. Same rugged Chrom on Brass Cosntruction.

WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

20' Telescoping Carbon Fiber Outrigger Poles for Sidewinder Mount

Advanced Carbon Composite Telescoping outriggers.  Lee's carbon fiber poles are by far stronger and lighter than any other aluminum pole on the market today.

The perfect solution for trolling a variety of baits. 

Features:

• Light Weight – Makes deployment, retrieval, raising, and lowering a breeze
• Strength – Spreaders become unnecessary
• A glossy clear coat finish is standard

Technical Specifications:

• Length - 20'
• Number of Sections - Four (4)
• Mounting Base - Lee's Sidewinder 1-5/8"
• Rigging – Double rigging 
• Maximum Line Strength – 400 lb. monofilament

*Sold as a Pair

Swivel Base Flush Mount Rod Holder
Part #: RH-5365SS
Medium 30 Stainless Steel

Without a doubt, our swivel base rod holder is the "Ultimate Rod Holder" for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tip's roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a half inch stainless steel lock nut at the bottom of the rod holder.

Flush Mount Rod Holder

 Bar Pin

All Stainless Steel

RH-530SS/XS Large 30°

The choice of boat manufacturers and consumers alike, Lee's has been the Rod Holder Specialist for over 50 years.