Shop by Brand: Intellinet

- Open frame for easy access to equipment from all sides and for maximum airflow with efficient heat dissipation
- Front-hinged design that lets the frame swing open for even easier access to panels
- Wall-mountable for network areas with limited floor space (wall-mounting hardware not included)
- Integrity/security bars for added stability and resistance to tampering
- Simple and cost-effective solution; great for testing IT equipment and for secure environments that do not require a lockable network cabinet
- Sturdy, high-quality, cold-rolled SPCC steel construction with antistatic powder coating
- Two posts with front-mounting rails and reversible swing frame
- Maximum load capacity of 30 kg (66 lbs.) with frame closed or 10 kg (22 lbs.) with frame opened
- Usable installation depth: 400 mm (15.75 in.)
- IEC 60297 / EIA 310-compliant; compatible with all standard 19 in. / 482.6 mm rack-mount equipment
- Ships flat-packed to save space and freight costs
- Includes 19" mounting material with 20 cage nut sets
- Frame can be opened on the left or right to swing as required

- Ideal for 19" rackmount applications
- Maximum static load of 30 kg
- Usable depth: 385 mm (15.16 in.)
- Cable entry via rear or top panel
- 4MM toughened glass door
- Rear door for easy access to back of cabinet
- Reversible Front door
- Cold-rolled, galvanized SPCC steel with up to 1.5 mm thickness
- Ships Flatpacked

- 15U, 600 mm (23.6 in.) Depth, Flat Pack, Black
- Ideal for 19" rackmount applications
- Maximum static load of 30 kg
- Usable depth: 385 mm (15.16 in.)
- Cable entry via rear or top panel
- 4MM toughened glass door
- Rear door for easy access to back of cabinet
- Reversible Front door
- Cold-rolled, galvanized SPCC steel with up to 1.5 mm thickness
- Ships Flatpacked

Provides power and data connection for up to 16 PoE network devicesSave installation cost by delivering data and power over existing network cables10/100/1000 auto-sensing ports automatically detect optimal network speedsTwo small form-factor pluggable GBIC module slots (SFP)IEEE 802.3at/af-compliant RJ45 PoE/PoE+ output portsPower output up to 30 watts per port*PoE power budget of 374 watts36 Gbps switch fabricSupports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (wireless access points, VoIP phones, IP cameras, etc.)Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage protectionAll RJ45 ports with Auto-MDIX and NWay auto-negotiation supportComplies with the IEEE 802.3az (Energy Efficient Ethernet EEE) specificationPoE management functions include PoE port settings, priority, power-on delay, scheduled PoE device restart and PoE device monitoringSNMP Management and Remote Monitoring (RMON)SNMP V1, V2C, V3 with RMON groups 1, 2, 3 & 9IPv4/v6 dual protocolSupports VLAN (tag-based and port-based)Provides IEEE 802.1x port-based securitySupports link aggregation (trunking)Supports bandwidth control per portSupports port mirroringSupports two types of QoS: port-based and DSCPBroadcast storm control with multicast packet rate settings512 kBytes buffer memorySupports 8k MAC address entriesSupports jumbo frames up to 9 kBytesSupports Rapid Spanning Tree/Spanning Tree protocolStore and forward switching architectureFull/half duplex operationIEEE 802.3x flow control for full duplexConfiguration via Web browser, Telnet or SSHLEDs for power, link/activity and PoETwo high-volume cooling fans ensure perfect ventilationThree-Year Warranty

10/100/1000 auto-sensing ports automatically detect optimal network speeds
All RJ45 ports with Auto-MDIX (auto uplink) support
For use on desktop or mounted in standard 19" rack
Supports NWay auto-negotiation
Store and forward switching architecture
Full/half duplex operation
Supports 802.3x flow control for full duplex mode and collision-based backpressure for half duplex mode
Green Ethernet power-saving technology deactivates unused ports and adjusts power levels based on the cable length
Supports jumbo frames up to 9 kBytes
Supports up to 8192 MAC address entries
512 kBytes buffer memory
Supports MAC address auto-learning and auto-aging
Fanless design ideal for silent operation
Includes 19" rackmount brackets

24 Port Web-Managed Gigabit Ethernet Switch with 2 SFP Ports
This 24 + 2 Layer 2 Gigabit Switch is a high-performance SNMP-managed device that provides users with 24 10/100/1000 Mbps Ethernet and 2 additional Gigabit SFP ports. The Web/SNMP management provides remote control capability providing flexible network management and monitoring options. Whether managed through an "in-band" SNMP management station or an Internet Web browser, the Intellinet 560917 Gigabit switch facilitates network management and problem diagnosis.
All RJ45 ports with Auto-MDIX and NWay auto-negotiation support
Complies with the IEEE 802.3az (Energy Efficient EEE) specification
Web-or Telnet-based configuration
SNMP V1, V2 with RMON groups 1, 2, 3, and 9
VLAN (Tag-based and port-based)
802.1x authentifcation and IP/MAC based Access Control Lists (ACL)
Link Aggregation/ACP (Port Trunking)
IGMP Snooping
Bandwidth control per port
Port Mirroring
Broadcast storm control with multicast packet rate settings
Supports jumbo frames up to 9kBytes
Rapid Spanning Tree/Spanning Tree protocol
Store and forward switching architecture
Fanless design ideal for silent operation
Full/half duplex operation
IEEE 802.3x flow control for full duplex
8K MAC Address entries
Packet Filter/Forwarding Rate: 1,488,000 pps (1000Mbps), 148,900 pps (100Mbps), 14,880 pps (10Mbps)
Rackmount
Packet Buffer Memory: 512kBytes
Total Ports: 26
Gigabit Ethernet Ports: 24
SFP Ports: 2
QoS: port-based, 802.1p, DSCP
IEEE Protocols: 802.1d, 802,1p, 802.1q, 802.1s, 802.3ad, 802.3, 802.3ab, 802.3az, 802.3u, 802.3x

- 24-Port Gigabit Ethernet PoE/PoE+ Web-Managed Switch with 2 SFP Ports
- The Intellinet 24-Port Gigabit Ethernet PoE+ Web-Managed Switch with 2 SFP Ports (560559) is designed to pass both data and electrical power to a number of PoE-compatible devices via standard Cat5e or Cat6 network cables. Equipped with 24 Gigabit Ethernet ports, all of which support 802.3at/af Power over Ethernet (PoE/PoE+), this switch can power Wireless LAN access points and bridges, VoIP (Voice over Internet Protocol) telephones, IP surveillance cameras and more while delivering network speeds of up to 1000 Mbps.
- Provides power and data connection for up to 24 PoE network devices
- Save installation cost by delivering data and power over existing network cables
- 10/100/1000 auto-sensing ports automatically detect optimal network speeds
- Two small form-factor pluggable GBIC module slots (SFP)
- IEEE 802.3at/af-compliant RJ45 PoE/PoE+ output ports
- Power output up to 30 watts per port*
- PoE power budget of 240 watts
- Supports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (wireless access points, VoIP phones, IP cameras)
- Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage protection
- All RJ45 ports with Auto-MDIX and NWay auto-negotiation support
- Web-based configuration
- Supports SNMP management
- Supports VLAN (tag-based and port-based)
- Provides IEEE 802.1x port-based security
- Supports link aggregation (trunking)
- Supports bandwidth control per port
- Supports port mirroring
- Supports two types of QoS: port-based and DSCP
- Broadcast storm control with multicast packet rate settings
- Supports jumbo frames up to 9 kBytes
- Supports Rapid Spanning Tree/Spanning Tree protocol
- Store and forward switching architecture
- Full/half duplex operation
- IEEE 802.3x flow control for full duplex
- Supports 8k MAC address entries
- 512 kBytes buffer memory
- LEDs for power, link/activity and PoE
- Two high-volume cooling fans ensure perfect ventilation
- Includes 19

- IEEE 802.3at/af (PoE+/PoE) Compliant, PoE Power Budget of 370 W, Two 1G SFP Open Slots, 19" Rackmount
- Provides up to 24 PoE network devices with power and data
- Two 1G small form-factor pluggable (SFP) module slots
- PoE power budget of 370 watts
- Power output up to 30 watts per port
- Manual VLAN mode to isolate ports 1 to 24 from each other while allowing them to communicate with SFP uplink ports 25 and 26
- Manual Flow Control Off mode to disable the Gigabit Ethernet switch's flow-control function
- 52 Gbps switch fabric
- 10/100/1000 auto-sensing ports that automatically detect optimal network speeds
- Complies with the IEEE 802.3az (Energy Efficient Ethernet EEE) specification
- Green Ethernet power-saving technology that deactivates unused ports and adjusts power levels based on the cable length
- Saves installation costs by delivering data and power over existing network cables
- Supports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (e.g., wireless access points, VoIP phones, IP cameras)
- Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage protection
- Auto-MDIX and NWay auto-negotiation support on all RJ45 ports
- Supports jumbo frames up to 9.2 kBytes
- All RJ45 ports with Auto-MDIX (auto uplink) support
- Store and forward switching architecture
- Supports 802.3x flow control for full duplex mode and collision-based backpressure for half duplex mode
- Supports 8k MAC address entries with Auto-learning and Auto-aging
- 512 kBytes buffer memory
- Two high-volume cooling fans to ensure perfect ventilation
- Includes 19" rackmount brackets
- Fully NDAA-compliant

- Provides up to 48 PoE network devices with power and data
- Four small-form-factor pluggable 10G SFP/SFP+ module slots
- Domotz compatible for cloud management
- PoE power budget of 400 watts
- Power output up to 30 watts per port
- Supports VLAN (tag-based and port-based)
- 10/100/1000 auto-sensing ports automatically detect optimal network speeds
- Supports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (wireless access points, VoIP phones, IP cameras)
- The Powered Device Monitor feature (PDM) restarts any connected PoE device that fails to respond or send out network traffic
- Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage protection
- All RJ45 ports with Auto-MDIX and NWay auto-negotiation support
- Complies with the IEEE 802.3az (Energy Efficient Ethernet EEE) specification
- Green Ethernet power-saving technology deactivates unused ports and adjusts power levels based on the cable length
- Switch fabric of 176 Gbps
- SNMP Management and Remote Monitoring (RMON)
- IPv4/v6 dual protocol
- Supports link aggregation (trunking)
- IGMP Snooping for multicast filtering
- Supports bandwidth control per port
- Supports port mirroring
- Supports two types of QoS: port-based and DSCP
- Broadcast storm control with multicast packet rate settings
- Supports jumbo frames up to 12 kBytes
- Supports Rapid Spanning Tree/Spanning Tree protocol
- Store and forward switching architecture
- Full/half duplex operation
- IEEE 802.3x flow control for full duplex
- Supports 16k MAC address entries
- Buffer memory of 1.5 MBytes
- Configuration via Web browser or RJ45 console port
- LEDs for power, system and link/activity/speed
- Two high-volume cooling fans to ensure perfect ventilation
- Includes 19" rackmount brackets

48 10/100/1000 Mbps auto-sensing ports automatically detect optimal network speedsFour small form-factor pluggable GBIC module slots (SFP)All RJ45 ports with Auto-MDIX and NWay auto-negotiation supportComplies with the IEEE 802.3az (Energy Efficient Ethernet EEE) specificationSNMP Management and Remote Monitoring (RMON)SNMP V1, V2C, V3 with RMON groups 1, 2, 3 & 9IPv4/v6 dual protocolSupports VLAN (tag-based and port-based)Provides IEEE 802.1x port-based securitySupports link aggregation (trunking)Supports bandwidth control per portSupports port mirroringSupports two types of QoS: port-based and DSCPBroadcast storm control with multicast packet rate settingsSupports 8k MAC address entriesSupports jumbo frames up to 9 kBytesSupports Rapid Spanning Tree/Spanning Tree protocolStore and forward switching architectureFull/half duplex operationConfiguration via Web browser, Telnet or SSHIEEE 802.3x flow control for full duplexLEDs for power, link/activity, connection speedFanless design ideal for silent operationThree-Year Warranty

- Provides up to four PoE network devices with power and data
- Four 10/100/1000 Mbps IEEE 802.3at/af-compliant RJ45 PoE ports, one gigabit RJ45 port and one gigabit SFP port
- PoE power budget of 91 watts
- Power output up to 30 watts per port
- Saves installation costs by delivering data and power over existing network cables
- Supports IEEE 802.3at and IEEE 802.3af-compliant PoE devices (e.g., wireless access points, VoIP phones, IP cameras)
- Supports IEEE 802.3at/af detection and short circuit, overload and high-voltage protection
- 12 Gbps switch fabric
- 10/100/1000 auto-sensing ports that automatically detect optimal network speeds
- Auto-MDIX and NWay auto-negotiation support on all RJ45 ports
- Store and forward switching architecture
- IEEE 802.3x flow control for full duplex
- Supports 2k MAC address entries
- Compact desktop format with rugged metal housing
- Grounding point to protect equipment from external electrical surges
- Mounting holes for wall mounting
- Rubber feet for non-slip desktop use
- Fanless design ideal for silent operation
- Fully NDAA-compliant

- 19" Wall Mount Open Frame Network Rack, 9U, Front-hinged Swing Frame
- Open frame for easy access to equipment from all sides and for maximum airflow with efficient heat dissipation
- Front-hinged design that lets the frame swing open for even easier access to panels
- Wall-mountable for network areas with limited floor space (wall-mounting hardware not included)
- Integrity/security bars for added stability and resistance to tampering
- Simple and cost-effective solution; great for testing IT equipment and for secure environments that do not require a lockable network cabinet
- Sturdy, high-quality, cold-rolled SPCC steel construction with antistatic powder coating
- Two posts with front-mounting rails and reversible swing frame
- Maximum load capacity of 30 kg (66 lbs.) with frame closed or 10 kg (22 lbs.) with frame opened
- Usable installation depth: 400 mm (15.75 in.)
- IEC 60297 / EIA 310-compliant; compatible with all standard 19 in. / 482.6 mm rack-mount equipment
- Ships flat-packed to save space and freight costs
- Includes 19" mounting material with 20 cage nut sets
- Frame can be opened on the left or right to swing as required

- Ideal for 19" rackmount applications
- Maximum static load of 30 kg
- Usable depth: 385 mm (15.16 in.)
- Cable entry via rear or top panel
- 4MM toughened glass door
- Rear door for easy access to back of cabinet
- Cold-rolled, galvanized SPCC steel with up to 1.5 mm thickness
- Ships Flatpacked

- Impedance Matched
- Gold Plated Contacts
- Unique PVC Jacket
- Snag Free Boots
- Strain Relief
- Standards Tested
- Meet or exceed current Cat5e proposed standards
- Lifetime Warranty
- UTP
- Certified to 350 MHz
- EIA/TIA Approved
- 4 Pairs
- RJ-45 Connectors

- Impedance Matched
- Gold Plated Contacts
- Unique PVC Jacket
- Snag Free Boots
- Strain Relief
- Standards Tested
- Meet or exceed current Cat5e proposed standards
- UTP
- Certified to 350 MHz
- EIA/TIA Approved
- 4 Pairs
- RJ45 Connectors

- Impedance matched
- Gold-plated contacts
- Snag-free boots
- Strain relief
- Standards tested
- UTP
- Certified to 350 MHz
- EIA/TIA approved
- 4 pairs
- RJ-45 connectors

- Impedance matched
- Gold-plated contacts
- Snag-free boots
- Strain relief
- Standards tested
- UTP
- Certified to 350 MHz
- EIA/TIA approved
- 4 pairs
- RJ-45 connectors

- Impedance matched
- Gold-plated contacts
- Snag-free boots
- Strain relief
- Standards tested
- UTP
- Certified to 350 MHz
- EIA/TIA approved
- 4 pairs
- RJ-45 connectors

- Gold-plated contacts for best connection
- PVC cable jacket for flexibility and durability
- Snag-free boots protect RJ45 connectors

- Impedance matched
-Gold-plated contacts
-Unique PVC jacket
-Snag-free boots
-Strain relief
-Standards tested
-Lifetime Warranty

- Fits any Intellinet Gigabit Ethernet switch with SFP module slots, or any MSA or Cisco compliant SFP port
- Data transfer rate: 1000 Mbps
- One 1000Base-LX single-mode Fiber LC duplex port

- Securely holds one flat-panel television
- Optimize views with -10¦ to 5¦ tilt adjustment
- Post-leveling adjustment allows for fine-tuned TV alignment
- Steel construction
- Easy installation ideal for home, office and commercial applications
- Meets VESA standards û supports TVs from 32ö to 55" up to 80 kg (176 lbs.)

- One 10/100/1000 RJ45 port supporting a maximum distance of 100 m (300 ft.)
- One 1000Base-SX fiber SC multi-mode port supporting a maximum distance of 550 m (1,800 ft.)
- Supports full-duplex and half-duplex modes with autonegotiation
- Link Fault Passthrough (LFP) function for easier network maintenance
- QoS (Quality of Service) bandwidth management
- IEEE 802.1Q VLAN tagging compliant
- Cut-through and store-and-forward switching architecture
- Wavelength: 850 nm
- Supports jumbo frames up to 9.2 kBytes
- Status LEDs for power and Link/TX on both ports
- External 5 VDC power adapter
- Functions as a stand-alone converter or can be used with the 14-slot Media Converter Chassis, model 507356
- Fully NDAA-compliant

- 4K @ 60Hz
- 18 Gbps Bandwith
- HDMI male to male
- Shielded 5m/15 ft
- Black

- Data transfer rate: 1000 Mbps
- One 1000Base-SX multi-mode fiber LC duplex port
- Distance support: up to 550 m (50/125 ¦m cable) or 220 m (62.5/125 ¦m cable)
- Wavelength: 850 nm
- SFP standard form factor
- Compliant with SFP Transceiver MSA specifications
- Compatible with the Cisco GLC-SX-MM transceiver
- Supports hot-plugging

- Data transfer rate: 100 Mbps
- One 10/100Base-TX RJ45 port, maximum distance 100 m / 300 ft.
- RJ45 port with Auto MDI/MDI-X support and auto-negotiation
- One 100Base-FX multi-mode Fiber SC duplex port
- Fiber distance support: up to 2 km / 1.24 mi (62.5/125 or 50/125 ¦m cable)
- Wavelength: 1310 nm
- Flow control
- Status LEDs for power and Link/TX for both ports
- External power adapter, 5 V DC
- Functions as a stand-alone converter or can be used with the 14-slot media converter chassis, model 507356

Designed to offer migration from copper-based Ethernet to Fiber Ethernet
Data transfer rate: 100 Mbps
One 10/100Base-TX RJ45 port, maximum distance 100 m / 300 ft.
RJ45 port with Auto MDI/MDI-X support and auto-negotiation
One 100Base-FX multi-mode Fiber ST duplex port
Fiber distance support: up to 2 km / 1.24 mi (62.5/125 or 50/125 ¦m cable)
Wavelength: 1310 nm
Flow control
Status LEDs for power and Link/TX for both ports
External power adapter, 5 V DC
Functions as a stand-alone converter or can be used with the 14-slot media converter chassis, model 507356