-Provides flexibility for front and rear cable management with a neat and clean appearance
Suitable for 2-post & 4-post racks, wall mount racks, wall brackets and support various configurations Available in both 1.70 |
-Provides flexibility for front and rear cable management with a neat and clean appearance
Suitable for 2-post & 4-post racks, wall mount racks, wall brackets and support various configurations Available in both 1.70 |
- Cable management spool
- Plastic - Retains and guides cables - No screws - White -10 Per pack - ICCICACSWDS10 |
- Cable management spool
- Plastic - Retains and guides cables - Includes screws - White -10 Per pack - ICCICACSWDS20 |
- Designed for voice and data applications
- Performance exceeds Category 5e connecting hardware requirements specified in TIA/EIA-568-C.2 - Color coded and designed for repeated use - Accepts 26-22 AWG solid or stranded wires - Used with IC110 wiring blocks and IC110TC termination caps |
- 110 Connecting Block, 5 Pair, 100 Pack
- For use in voice and data applications - Performance exceeds Category 5e connecting hardware requirements specified in TIA/EIA-568-B.2 - Color coded and designed for repeated use - Accepts 26-22 AWG solid or stranded wires - UL Listed and ROHS Compliant |
- Single 110 replacement blade for ICACSPDT00 110 and 66 punch down tool
|
- ICC replacement head for ICACSPDT05 5-Pair 110 punch down tool
- 5 Pair ICCICACS05PRH |
3 Conductor 110 Termination CapDesigned to secure proper termination on 110-type connecting blocksUsed with IC110CB connecting blocksUL Listed and ROHS Compliant50 Pack
|
- 110 Termination caps
- Cap is designed to secure proper termination on connecting blocks - 4-Conductor caps - 50 per bag |
4 pair connecting blocks, (4) 5 pair connecting blocks, (2) label holder and designation labels, and (4) 6ö cable ties and cable organizers
High density wall mounted cross connect system designed for voice and data applications Hinged design allows block to swing open for easy access behind the block without removing the block from the wall Performance exceeds Category 5e connecting hardware requirements specified in TIa/EIA-568-B.2 Easy system administration with designation labels and label holders UL Listed and ROHS Compliant |
(60) 4 pair connecting blocks, (12) 5 pair connecting blocks, and (6) label holder and designation labels.Designed to support both telephone and data applicationsPerformance exceeds Category 5e connecting hardware requirements specified in TIA/EIA-568-B.2Easy maintenance due to the included labels and label holdersUL Listed and ROHS Compliant
|
- 110 Wiring Block with Feet Kit, 100- Pair, 5e
- High density wall mounted cross connect system designed for voice and data applications - Performance exceeds Category 5e connecting hardware requirements specified in TIa/EIA-568-B.2 - Easy system administration with designation labels and label holders - Used with IC110 cable management blocks, ICACSPDT00 and ICACSDT05 110 punch down tools |
- (1) 100 Pair 110 Block With Feet, (2) Label Holders, and (2) Destination Labels
- High density wall mounted cross connect system designed for voice and data applications - Easy system administration with designation labels and label holders - UL Listed and ROHS Compliant |
(1) 300 Pair 110 Block With Feet, (6) Label Holders, and (6) Destination LabelsDesigned for voice and data installationsSimple wall mount 110 block designIncludes designation labels and label holdersUL Listed and ROHS Compliant
|
(1) 96 Pair 110 Wiring Block With Feet, (24) 4 Pair 110 Connecting Blocks, (2) Label Holders, and (4) Destination LabelsHigh density wall mounted cross connect system designed for voice and data applications Performance exceeds Category 6 connecting hardware requirements Easy system administration with designation labels and label holders
|
- High density wall mounted cross connect system desigend for voice and data applications
- Easy system administration wtih designation labels and label holders - Use with IC110CB connecting blocks, IC110 cabel management blocks, ICACSPDT00 and ICACSPDT05 punch down tools |
(1) 100 Pair Hinged Wiring 110 Block, (2) Label Holders, (2) Destination Labels, (4) Cable Organizers, (4) Cable Ties, (4) Head Tapping Screws, and Installation Instructions.High density wall mounted cross connect system designed for voice and data applicationsHinged design allows block to swing open for easy access behind the block without removing the block from the wallEasy system administration with designation labels and label holdersUL Listed and ROHS Compliant
|
- Yellow 1 ft Cat5e Patch Cable
- Performance, Design, and Value - 100 % Factory Tested - 50 Micro Inch Gold plated contacts - Exceeds ANSI/TIA/EIA-568B.2 connecting hardware requirements - Ultra Slim Low Profile boots for high density applications, no width wasted on boot - Backwards compatible to all lower rated category components - Constructed with (Ultra Flexible, EZ release, Snag Free Molded Strain relief) - Stranded bare 24 AWG copper wire (no substandard tinned copper materials used) - Safety: UL listed with 94V-0 rated plugs, CSA, CMG, FT4 Flame rated |
- ICC Category 6 EZmodular connector (jack)
- 8 Position - 8 Conductor - Engineered for superior performance andreliability characteristics - Featuring enhanced Near-End and Far-End Crosstalk cancellation to reduce interference - Low return loss minimizes signal reflections - Performance exceeds Category6 standards - PCB design eliminates the need for split pairs and reduces installation time - Includes a termination cap that simultaneously terminates all 4 pairs - Backward compatible with a Category 5E installation - Red - ICCCAT6JACKRD |
|
- Designed for voice and data applications
- Performance exceeds Category 5e connecting hardware requirements specified in TIA/EIA-568-C.2 - Durable and strong high impact flame retardant material - Mounts on wall or on ICMB89B0WH mounting bracket - Requires industry standard 66 block termination tool for punch down (ICACSPDT00) - Used with IC066BRCLP 66 wiring block bridging clips, IC066CV050 wiring block cover, and IC066SL050 wiring block labeling strips |
- 3/4
|
- 1 5/16
|
- ICC 25 foot line cord
- 6P4C - 28 Gauge ICCGCLA466025 |
The female-to-female 25-pair Telco Cable Assembly provides connectivity for voice and data applications. It can be used on patch panels, punch down boxes, distribution boxes, and ICC's 66 and 110 wiring blocks.
- Designed for use with voice and low data applications with punch down blocks, patch panels, and distribution boxes - Can also be used as extension cables - 24 AWG unshield twisted pair (UTP) Category 3 rated cable - Includes two 50-pin female telco connectors (RJ21) |
- The female-to-blunt 25-pair Telco Cable Assembly provides connectivity for voice and data applications. It can be used on patch panels, punch down boxes, distribution boxes, and ICC's 66 and 110 wiring blocks.
- Designed for use with voice and low data applications with punch down blocks, patch panels, and distribution boxes. - Can also be used as extension cables. - 24 AWG unshield twisted pair (UTP) Category 3 rated cable. - Includes one 50-pin female telco connector (RJ21). |
- The female-to-blunt 25-pair Telco Cable Assembly provides connectivity for voice and data applications. It can be used on patch panels, punch down boxes, distribution boxes, and ICC's 66 and 110 wiring blocks.
- Designed for use with voice and low data applications with punch down blocks, patch panels, and distribution boxes. - Can also be used as extension cables. - 24 AWG unshield twisted pair (UTP) Category 3 rated cable. - Includes one 50-pin female telco connector (RJ21). |
- The female-to-blunt 25-pair Telco Cable Assembly provides connectivity for voice and data applications. It can be used on patch panels, punch down boxes, distribution boxes, and ICC's 66 and 110 wiring blocks.
- Designed for use with voice and low data applications with punch down blocks, patch panels, and distribution boxes. - Can also be used as extension cables. - 24 AWG unshield twisted pair (UTP) Category 3 rated cable. - Includes one 50-pin female telco connector (RJ21). |
- The female-to-blunt 25-pair Telco Cable Assembly provides connectivity for voice and data applications. It can be used on patch panels, punch down boxes, distribution boxes, and ICC's 66 and 110 wiring blocks.
- Designed for use with voice and low data applications with punch down blocks, patch panels, and distribution boxes. - Can also be used as extension cables. - 24 AWG unshield twisted pair (UTP) Category 3 rated cable. - Includes one 50-pin female telco connector (RJ21). |
The female-to-female 25-pair Telco Cable Assembly provides connectivity for voice and data applications. It can be used on patch panels, punch down boxes, distribution boxes, and ICC's 66 and 110 wiring blocks.
- Designed for use with voice and low data applications with punch down blocks, patch panels, and distribution boxes - Can also be used as extension cables - 24 AWG unshield twisted pair (UTP) Category 3 rated cable - Includes two 50-pin female telco connectors (RJ21) |
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |