Used to adapt a round WindBeater to a masonry flue
|
When using WindBeater on a fireplace flue - READ CAREFULLY. The WindBeater size you use must have a cross-sectional area appropriate for the fireplace.
|
The 24 ga. lids attach in seconds with your choice of cap screws or optional wing nuts.
These caps feature weld nuts on the 18 ga. base and mounting strips to eliminate the possibility of stripped threads forever! |
HomeSaver's single-flue caps are available in +" rugged mesh. Some galvanized sizes are available in 5/8" (California) mesh. HomeSaver single flue caps feature picture frame embossing on the lid as well as a shallow channel base for added strength. For th
|
Use with 3" - 6" Flex
ArmorMesh is required as part of a HomeSaver UL Listed installation. This 304 stainless woven wire mesh wraps the blanket insulation and holds it close to the pipe. ArmorMesh also makes FlexWrap highly resistant to tearing during |
HomeSaver Tight Weave Armormesh, 12" x 25' roll
|
Use with 3" - 6" Flex
ArmorMesh is required as part of a HomeSaver UL Listed installation. This 304 stainless woven wire mesh wraps the blanket insulation and holds it close to the pipe. ArmorMesh also makes FlexWrap highly resistant to tearing during |
Use with 3" - 6" Flex
ArmorMesh is required as part of a HomeSaver UL Listed installation. This 304 stainless woven wire mesh wraps the blanket insulation and holds it close to the pipe. ArmorMesh also makes FlexWrap highly resistant to tearing during |
HomeSaver Tight Weave Armormesh, 12" x 35' roll
|
HomeSaver's single-flue caps are available in +" rugged mesh. Some galvanized sizes are available in 5/8" (California) mesh. HomeSaver single flue caps feature picture frame embossing on the lid as well as a shallow channel base for added strength. For th
|
HomeSaver's single-flue caps are available in +" rugged mesh. Some galvanized sizes are available in 5/8" (California) mesh. HomeSaver single flue caps feature picture frame embossing on the lid as well as a shallow channel base for added strength. For th
|
HomeSaver's single-flue caps are available in +" rugged mesh. Some galvanized sizes are available in 5/8" (California) mesh. HomeSaver single flue caps feature picture frame embossing on the lid as well as a shallow channel base for added strength. For th
|
HomeSaver's single-flue caps are available in +" rugged mesh. Some galvanized sizes are available in 5/8" (California) mesh. HomeSaver single flue caps feature picture frame embossing on the lid as well as a shallow channel base for added strength. For th
|
HomeSaver's single-flue caps are available in +" rugged mesh. Some galvanized sizes are available in 5/8" (California) mesh. HomeSaver single flue caps feature picture frame embossing on the lid as well as a shallow channel base for added strength. For th
|
HomeSaver's single-flue caps are available in +" rugged mesh. Some galvanized sizes are available in 5/8" (California) mesh. HomeSaver single flue caps feature picture frame embossing on the lid as well as a shallow channel base for added strength. For th
|
Use with 7" - 9" Flex, Small OvalFlex, RectangleFlex, 8" x 12" FirePlaceFlex
ArmorMesh is required as part of a HomeSaver UL Listed installation. This 304 stainless woven wire mesh wraps the blanket insulation and holds it close to the pipe. ArmorMesh |
HomeSaver Tight Weave Armormesh, 18" x 25' roll
|
Use with 10" - 16" Flex, Large Oval, 12" x 12" FirePlaceFlex
ArmorMesh is required as part of a HomeSaver UL Listed installation. This 304 stainless woven wire mesh wraps the blanket insulation and holds it close to the pipe. ArmorMesh also makes Flex |
HomeSaver Tight Weave Armormesh, 24" x 25' roll
|
Friction fit to inside of liner. Can be used with a collarplate or use with storm collar, top clamp, and top plate to complete system.
|
HomeSaver UltraPro .005" 316 Ti-Alloy Stainless Pre-Cuts
|
HomeSaver UltraPro/Pro Pre-Assembled Component Kits.
All Fuel Component Kit Contents: 13" x 13" Pyramid Collarplate, Rain Cap for Collarplate, Short Body Tee with 10" Removable Snout, Tee Cover. Insert Kit Contents: 13" x 13" Pyramid Collarplate, |
Used to adapt a round WindBeater to a masonry flue
|
15-7/8" high, 4" Take-off
|
Used to adapt a round WindBeater to a masonry flue
|
When using WindBeater on a fireplace flue - READ CAREFULLY. The WindBeater size you use must have a cross-sectional area appropriate for the fireplace.
|
15-7/8" high, 6-1/8" Take-off
|
Used to adapt a round WindBeater to a masonry flue
|
HomeSaver's single-flue caps are available in +" rugged mesh. Some galvanized sizes are available in 5/8" (California) mesh. HomeSaver single flue caps feature picture frame embossing on the lid as well as a shallow channel base for added strength. For th
|
HomeSaver's single-flue caps are available in +" rugged mesh. Some galvanized sizes are available in 5/8" (California) mesh. HomeSaver single flue caps feature picture frame embossing on the lid as well as a shallow channel base for added strength. For th
|
HomeSaver's single-flue caps are available in +" rugged mesh. Some galvanized sizes are available in 5/8" (California) mesh. HomeSaver single flue caps feature picture frame embossing on the lid as well as a shallow channel base for added strength. For th
|
HomeSaver's single-flue caps are available in +" rugged mesh. Some galvanized sizes are available in 5/8" (California) mesh. HomeSaver single flue caps feature picture frame embossing on the lid as well as a shallow channel base for added strength. For th
|
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |