150ft Vehicle Sensor Exit Wand
|
Automatic Gate Lock-for Pull to Open Applications A MUST for added security. The plated steel bolt lock has a zinc plated steel housing and is driven by a 4 Amp solenoid. This horizontal electronic lock is used with all GTO low voltage swing gate operator systems (not to be used with GTO/PRO AC powered operators) for additional security and stability. Used with the Mighty Mule system for maximum stability and security. Comes with a keyed manual release. Recommended for gates over 8 ft. long. Ideal for animal enclosures or high wind areas.
|
Helps keep the battery warm in cold weather climates. Recommended where outside temperatures get below 32F for extended periods of time.
|
Designed for light duty dual swing gates up to a maximum of 12 ft long or maximum weight of 300 lbs.
Ideal for the DIY (Do It Yourself) property owner, the MM272 comes equipped with detailed instructions, online how-to videos & unlimited access to 24 hour technical support.
|
Direct burial Gate Opening Sensor (also referred to as a Probe or Wand). Wires directly to the Gate Opener Control Box and senses mass metal in motion. This unit is recommended for use on the inside of the property for free exit by automobile without having to push a button. It comes with a 50 foot cable that should be trenched and placed next to your drive and buried no more than 12 inches deep and no closer than 30 feet from the gate. It will detect vehicles (cars, trucks, ATV's, motorcycles, etc.) as they cross over the buried sensor with its 15 foot magnetic field and automatically open the gate as you exit.
|
Pin Lock (FM133) The Pin Lock substitutes for the clevis pin at either or both mounting points of the opener. Helps prevent theft of the opener from the gate, while allowing quick release of the opener.
|
Low Voltage Wire (RB509) The 16 gauge, multistranded, dual conductor Low Voltage Wire is for connecting the AC powered tranformer, or the Solar Panel to the control board. Also used for the connection of accessories, such as locks, keypads and other wired control devices. This specially designed wire is UV treated, PVC coated and ready for direct burial. 100ft.
|
Low Voltage Wire (RB509) The 16 gauge, multistranded, dual conductor Low Voltage Wire is for connecting the AC powered tranformer, or the Solar Panel to the control board. Also used for the connection of accessories, such as locks, keypads and other wired control devices. This specially designed wire is UV treated, PVC coated and ready for direct burial. 250ft.
|
Low Voltage Wire (RB509) The 16 gauge, multistranded, dual conductor Low Voltage Wire is for connecting the AC powered tranformer, or the Solar Panel to the control board. Also used for the connection of accessories, such as locks, keypads and other wired control devices. This specially designed wire is UV treated, PVC coated and ready for direct burial. 500ft.
|
Second Opener for the MM-SL2000B for gates up to 1000lbs and up to 20ft (per leaf). Commerical grade opener which is designed for higher cycle or heavier gates in commercial or residential applications. All systems include a battery back-up, radio receiver, entry transmitter, AC transformer, and all necessary mounting hardware. The system is solar compatible and come with a 24 month limited warranty.
We sell complete gate kits that work with this gate opener, please check out the following model numbers: G1510-KIT, G1512-KIT, G1610-KIT, G1612-KIT, G1710-KIT, G1712-KIT, G2512-KIT, G2514-KIT, G2516-KIT, G2612-KIT, G2614-KIT, G2616-KIT, G2712-KIT, G2714-KIT, G2716-KIT, G5104-KIT, G5105-KIT, G5106-KIT, G5204-KIT, G5205-KIT, G5206-KIT, G5304-KIT, G5305-KIT, G5306-KIT |
Entry Transmitter (FM135) The Mighty Mule Entry Transmitter, with adjustable code settings, is standard equipment with all Mighty Mule systems. The battery is included.
|
Provide a 'non-contact' means of entrapment protection. When something comes in the path of the eyes while the gate is opening or closing, the gate opener stops and reverses direction.
|
Push Button Control (FM132) The Push Button Control Button is for remote entry or exit control. It wires directly to the control board and uses Mighty Mule's (RB509) 16 gauge multi-stranded, dual conductor low voltage wire (SOLD SEPARATELY).
|
FM148 Push to Open Bracket. It does not work with the FM200. Required when a Mighty Mule Gate Opener(s) must push a gate open, such as on a sloping driveway or where space prevents gate(s) from opening into the property (pulled open). Order two brackets for a dual swing gate installation
|
Replacement Battery, 12V, 7amp Hr.
|
Slide Gate Opener for gates up to 1000lbs and up to 20ft (per leaf). Commerical grade opener which is designed for higher cycle or heavier gates in commercial or residential applications. All systems include a battery back-up, radio receiver, entry transmitter, AC transformer, and all necessary mounting hardware. The system is solar compatible and come with a 24 month limited warranty.
We sell complete gate kits that work with this gate opener, please check out the following model numbers: G1510-KIT, G1512-KIT, G1610-KIT, G1612-KIT, G1710-KIT, G1712-KIT, G2512-KIT, G2514-KIT, G2516-KIT, G2612-KIT, G2614-KIT, G2616-KIT, G2712-KIT, G2714-KIT, G2716-KIT, G5104-KIT, G5105-KIT, G5106-KIT, G5204-KIT, G5205-KIT, G5206-KIT, G5304-KIT, G5305-KIT, G5306-KIT |
Mighty Mule introduces a new line of smart gate operators û the first smart DIY automatic swing gate operators in the industry. These gate operators bring unrivaled convenience with smart features that allow control from anywhere using your smart phone app. (Requires MMS100 Wireless Connectivity Kit - sold separately)
|
Smart gate opener provides ability to control your gate from anywhere using your Mighty Mule smart phone app. (Requires MMS100 Wireless Connectivity Kit - sold separately).
|
The solar panel charging kit is optional for all Mighty Mule automatic gate openers. Kit includes all necessary mounting hardware and low voltage wire. Perfect for applications far away from an AC power outlet. 10 watt- Min requirement for dual gate applications.
|
Both buttons are programmable to control multiple gate openers on different gates and/or gate door openers. Includes keychain and battery.
|
MMK200 Digital Keypad is designed for use with Mighty Mule automatic gate operators. The wireless digital keypad provides secure access to your property. It can be programmed to use up to twenty-five different personal identification number (PIN) codes.
|
Wireless 'Hands Free' operation of the gate opener. Easy installation - no trenching required. Works with and brand of gate operator system.
|
Wireless Intercom & Keypad for Automatic Gate Openers
|
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |