"Special Ops" Powerwheel - Black w/Black Nut & Knob Edson's Special Ops ComfortGrip PowerWheel is finished in a rugged durable black finish. The Special Ops wheel was designed specifically for hard working mariners patrolling the waterways in agency or work vessels - but is just as at home on a custom flats skiff in the Florida Keys or a center console chasing stripers! This Edson Special Ops Wheel comes with a non-reflective black powder-coated wheel nut as well as the Sportsman PowerKnob, designed for the demanding conditions of coastal and offshore operations.
Features:
|
Edson PowerWheels™ 13" SS Comfort Grip The perfect combination of durability, good looks and soft feel! Edson’s ComfortGrip PowerWheels feature a unique rubber finger grip insert that provides precise control and ultimate comfort. And with the optional Pro-Series or ComfortGrip PowerKnob, you also get the ultimate in control. Includes Stainless Wheel Nut with inserts for 12mm & 5/8”-18 threads. You have your hands on your wheel more than any other part of your boat - so don't settle for anything but the best! Edson PowerWheels™ feature a classic design blended with contemporary styling and are one of the best ways to upgrade the look and feel of your boat. FEATURES:
|
Edson PowerWheels™ 14.5" SS Comfort Grip The perfect combination of durability, good looks and soft feel! Edson’s ComfortGrip PowerWheels feature a unique rubber finger grip insert that provides precise control and ultimate comfort. And with the optional Pro-Series or ComfortGrip PowerKnob, you also get the ultimate in control. Includes Stainless Wheel Nut with inserts for 12mm & 5/8”-18 threads. You have your hands on your wheel more than any other part of your boat - so don't settle for anything but the best! Edson PowerWheels™ feature a classic design blended with contemporary styling and are one of the best ways to upgrade the look and feel of your boat. FEATURES:
|
Edson 3" Stainless Antenna Standoff - Antennas Up To 1.5" Diameter
These strong and attractive standoffs will limit the amount of wear and tear on your antennas while powering through rough seas. Made from investment cast 316 stainless, they will never break like plastic. Fitting all antennas up to 1.5" in diameter, they are available in three sizes, virtually eliminating the need to shim the standoff or antenna base. The clasp is held closed with a quick release pin allowing for quick antenna takedown to go under bridges or for trailering. Each clasp is padded providing a secure, rattle free closure. The combination of a highly polished and vapor blast gray finish enhance the sleek, attractive styling. |
3" Stainless Clamp-On Accessory Mount Edson's 3" Stainless Clamp On Accessory Mount allows you to mount drink holders, instruments or nearly anything else that requires a secure location on the pedestal guard. |
4° Wedge for Under Vision Mounting Plate While underway the bow of your powerboat tends to ride at an elevated angle, causing your radar to be angled. With Edson's 68810 4 degree Wedge for under Vision Mounting Plates the elevated bow will be offset aligning your radar to see better. Edson's 4 Degree Wedge requires an Edson Mounting Plate and an Edson Vision Series Mount. Order Base Mount and Mounting Plate separately. Specifications 5.313" x 5.063" 3" Inner Diameter |
7" Stainless Clamp-On Accessory Mount Edson's 7" Stainless Clamp On Accessory Mount allows you to mount drink holders, instruments or nearly anything else that requires a secure location on the pedestal guard. |
Brake Maintenance Kit Just like your car, your boat’s wheel brake needs periodic relining. This kit includes all you need to make your brake work like new again. Kit Includes:
|
Clamp-On Drink Holder - Double - Teak Add an elegant touch to your boat with Edson's Teak Base Stainless Drink Holder, with the ability to clamp-on to 1", 1-1/8" and 1-1/4" pipes. With the right amount of space for any drink that can fit inside of a koozie, each drink holder is designed to keep your cup, bottle or favorite coffee mug in place! Features:
|
Clamp-On Drink Holder - Double - White Poly Edson's White Poly Base Stainless Drink Holder will add an elegant touch to your boat! It has the ability to clamp-on to 1", 1-1/8" and 1-1/4" pipes. With the right amount of space for any drink that can fit inside of a koozie, each drink holder is designed to keep your cup, bottle or favorite coffee mug in place! Features:
|
Clamp-On Drink Holder - Single - Teak Add an elegant touch to your boat with Edson's Teak Base Stainless Drink Holder, with the ability to clamp-on to 1", 1-1/8" and 1-1/4" pipes. With the right amount of space for any drink that can fit inside of a koozie, each drink holder is designed to keep your cup, bottle or favorite coffee mug in place! Features:
|
Clamp-On Drink Holder - Single - White Poly Edson's White Poly Base Stainless Drink Holder will add an elegant touch to your boat! It has the ability to clamp-on to 1", 1-1/8" and 1-1/4" pipes. With the right amount of space for any drink that can fit inside of a koozie, each drink holder is designed to keep your cup, bottle or favorite coffee mug in place! Features:
|
ComfortGrip™ 12"- 3-Pack Edson’s iconic ComfortGrip™, now in 12” adhesive strips! Designed to fit on 1” to 1.25” diameter railings, these tactile grips will ergonomically cushion fingers while providing a secure hold. A high-performance Santoprene construction and a 3M Adhesive ensures these grips can withstand the harshest conditions! The 12" ComfortGrip™ include three grips to fit just about any application. By adding a comfortable ergonomic grip with finger grooves to additional rail supports around your boat will not only save your hands but the hands of your guests as well. These grips are great to attach to: Boarding Handles, Hand Rails, Grab Rails, Swim Ladders, Bow Rails, Tiller Steering, T-Tops, Tools, and much more! Specifications:
|
ComfortGrip™ 8"- 3-Pack Edson’s iconic ComfortGrip™, now in 8” adhesive strips! Designed to fit on 1” to 1.25” diameter railings, these tactile grips will ergonomically cushion fingers while providing a secure hold. A high-performance Santoprene construction and a 3M Adhesive ensures these grips can withstand the harshest conditions! The 8" ComfortGrip™ include three grips to fit just about any application. By adding a comfortable ergonomic grip with finger grooves to additional rail supports around your boat will not only save your hands but the hands of your guests as well. These grips are great to attach to: Boarding Handles, Hand Rails, Grab Rails, Swim Ladders, Bow Rails, Tiller Steering, T-Tops, Tools, and much more! Specifications:
|
EC3 Elite Carbon 13" ComfortGrip PowerWheel - Carbon Fiber - 3-Spoke
13" Carbon 3-Spoke You have your hands on your wheel more than any other part of your boat - so don’t settle for anything but the best! Edson PowerWheels™ feature a classic design blended with contemporary styling and are one of the best ways to upgrade the look and feel of your boat. Features:
|
Fold-Down Adapter 2-3/8" Mast This Fold Down adapter attaches to the bottom of your radar mast allowing it to fold down. Fold-Down Towers are perfect for trailer boats, low bridge clearance and end of the season storage. By using a 992-35 Pivot Bracket (sold separately) and Fold-Down Adapter with your Standard Radar Mast, you can also mount your radar on a raked transom or coaming side. Use 989-1 Right Angle Base (sold separately) if mounting to a vertical surface and folding tower fore and aft. |
Hardware Kit for Drop Leaf Table - Clamp Style Edson’s “Hardware Only” Kits are for the handyman who wishes to design and build his own cockpit table or accessories based on Edson’s tried and true designs. All kits are complete with instructions and stainless hardware. Includes 4 stainless table hinges not shown in photo. Clamps are built to accommodate 1", 1-1/8", and 1-1/4" guard pipe diameters. |
Hardware Kit for Luncheon Table - Clamp Style Edson’s “Hardware Only” Kits are for the handyman who wishes to design and build his own cockpit table or accessories based on Edson’s tried and true designs. All kits are complete with instructions and stainless hardware. Clamps are built to accommodate 1", 1-1/8", and 1-1/4" guard pipe diameters. |
Horizontal Rail Accessory Mount - 3" Disk Edson’s Stainless Horizontal Rail Accessory Mount puts your hand-held GPS securely and conveniently within reach on your Steering Pedestal Guard. With its 3" Disk Platform you can mount your GPS hand held or other items that need a secured place to stay. |
Horizontal Rail Accessory Mount - 5" Disk Edson’s Stainless Horizontal Rail Accessory Mount puts your hand-held GPS securely and conveniently within reach on your Steering Pedestal Guard. With its 5" Disk Platform you can mount your GPS hand held or other items that need a secured place to stay. |
Leather Shackle Pulls When hands are cold, tired and wet, sometimes they need a little assistance with stubborn snap shackles and sticky zippers. Edson’s custom-cut “whale tail” Dove Gray Leather Shackle Pulls are durable and the “whale tail” prevents them from coming undone. Attach them to anything you need to get your hands on quickly. Snap shackles and blocks, zippers on your foul weather gear, luggage zippers, cushion zippers, quick-release pins - you name it and you will wonder how you got this far without them. Sold in Packages of 10. |
Leather Spreader Boots Kit - Large Mariners have been using leather for centuries to prevent premature wear of their sails. Leather will easily outlast and outperform materials of lesser quality, like rubber or tape, when exposed to sun and salt in the harsh marine environment. Edson’s custom-cut, hand-stitched Leather Spreader Boots will protect your sails from costly tears and chafe, providing you peace of mind at sea and leaving more money in your pocket. Each kit includes two pre-punched Dove Gray Leather Spreader Boot Covers, heavy waxed polyester thread for lacing, hand-stitching needle and instructions. |
Leather Turnbuckle Covers - Small Edson’s Leather Turnbuckle Covers add a distinctive look while protecting your lines and sails from premature wear. These high quality turnbuckle covers will not crack or deteriorate like plastic and offer more complete coverage, are better looking and longer lasting than tape. Add the look and feel that only comes with leather. Available in Dove Gray, they are attached and removed easily with pre-fastened, industrial grade hood-and-loop strips. Sold individually. |
Molded Compass Cylinder - White Edson’s Compass Cylinders are distinctive, non-reflecting, and virtually indestructible. Great for new boats or upgrading your existing pedestal to a larger, easier to read compass. Fits Edson’s 335 and 336 pedestals, stands 5-1⁄2” high and accommodates flush mounted compasses up to a 6-7⁄8” flange diameter. |
One-Step Boarding Step w/Line
If the deck of your boat seems to be getting higher and your dinghy seems to be getting lower, get Edson's "One-Step Boarding Step". Edson makes getting onboard safer and easier. Cast in aluminum and coated with durable, glossy-white baked-on Urethane coating, this Step is designed to attach to your lifeline gate stanchions and hang against the side of your boat. It has neoprene bumpers that won't mar your topsides, and the built-in handles give you a secure handhold. The Boarding Step is lightweight and compact, taking up minimal space in locker compared to cumbersome ladders. Comes complete with 6 ft. of braided line with stainless snap shackles. Wt. 5 lb (2.3 kg). Features:
|
Pedestal Rebuild Kit Bring new life to your older Edson Pedestal with this complete Rebuild Kit. Edson's Pedestal Rebuild Kit replaces all of the important moving parts that will make your Pedestal run smoothly again! Kit Includes:
|
Pipe to Fold-Down Adapter 3-1/2" Mast Edson's Fold-Down Adapter 3-1/2" Radar Masts attaches to the bottom of your radar mast allowing it to fold down. Fold-Down Towers are perfect for trailer boats, low bridge clearance and end of the season storage. By using a992-35 Pivot Bracket (sold separately) and Fold-Down Adapter with your Standard Radar Mast, you can also mount your radar on a raked transom or coaming side. Use 989-1 Right Angle Base (sold separately) if mounting to a vertical surface and folding tower fore and aft. |
Pivot Bracket with Backing Plate Edson's Pivot Bracket attaches to Edson's Fold-Down Adapter for Radar Masts (990-23 2-3/8" Mast & 990-35 3-1/2" Mast) (sold separately) that is secured to the bottom of your radar mast allowing it to fold down. Fold-Down Towers are perfect for trailer boats, low bridge clearance and end of the season storage. Use 989-1 Right Angle Base (sold separately) if mounting to a vertical surface and folding tower fore and aft. |
ComfortGrip PowerKnob
We've taken all the features of our proven Stainless PowerKnob and added rubber finger grips for even greater comfort and control! Soft rubber insert will stand up to the harshest environments without cracking or discoloring. A great addition to any wheel, it particularly compliments our ComfortGrip Steering Wheel. |
PowerKnob ProSeries - Stainless
The Ultimate In Steering Control! Edson's classic Stainless PowerKnob is hands-down the best available on the market today. This is the one accessory you won't know how you lived without. Features:
Ideal For:
|
PowerKnob Sportsman - Black
The Ultimate In Steering Control! The rugged and economical Sportsman Series PowerKnob features the same ball-bearing design and ergonomic shape as the ProSeries. The Sportsman Series Knob is built of black polymer and marine-grade stainless with precision milled bearing races. Feataures:
Ideal For:
Contents:
|
Single Stainless Steel Drink Holder - Vertical Mount Edson Single Stainless Drink Holder - Vertical Mount is great for mounting to the side of your bulkhead, center console or any vertical location on your boat! With the right amount of space for any drink that can fit inside of a koozie, each drink holder is designed to keep your cup, bottle or favorite coffee mug in place. |
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |