Shop by Brand: Attwood Marine

• 7" Wire Lead
  
• 12V
  
• Stainless Steel Housing
  
• Green

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Red
  
• 1-Mile
  
• Stainless Steel Housing
  
• 112.5 Degree

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

1200 lb Single Drive Winch - 2" x 20' Nylon Strap

Solid gear construction with precise gear tooth engagement. 1,200-lb. load capacity with 4.1:1 gear ratio. Three position pawl provides forward, neutral, and reverse operations. 

Features:

• Black EDC finish 
• Molded, textured roller grip 
• Includes 20 ft. long nylon web strap with zinc-plated snap hook

• Waterproof construction
  
• Made out of heavy duty 500 denier PVC coated mesh fabric
  
• Integrated carry handle
  
• 1-1/2" adjustable shoulder strap

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

2000 lb Dual Drive Winch - 2" x 20' Nylon Strap

Dual drive enhances the pulling capacity by distributing the load equally to two sets of gears. Eliminates frame torque. 2,000-lb. load capacity with 4.1:1 gear ratio. 

Features:

• Three-position pawl provides forward, neutral, and reverse operations 
• Black EDC finish. Molded, textured roller grip 
• Includes 2 in x 20 ft. nylon web strap with zinc-plated snap hook

• 1/4" spade terminals
  
• 6-volt through 32-volt D.C. only
  
• 10 amps maximum
  
• Plate is 2-13/16" x 1-7/8"
  
• Hole size is 1-1/2" x 7/8"

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

3.5lb Grapnel Anchor System

This 3.5lb anchor will hold your PWC, canoe, dinghy, kayak, or float tube in sand, mud, gravel, and rock. Includes 25' of rope, marker buoy, giant snap hook, anchor and a durable nylon storage case that protects your boat from scratches.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

316 Stainless Steel Alloy Flush Mount Fuel Vent - 90° Vent

On the exterior, they have a smooth edge over the competition. Unlike some others, there is no protruding cap to cause damage or be damaged by hull bumps and scrapes. Cap unscrews with a hex head wrench for easy cleaning of the filter and pressure testing of the entire fuel system. These vents now include two silicone gaskets.

Features:

• 90-degree vent

Specifications:

• Hose Size (inch): 5/8" inner diameter
• Maximum Hull Thickness (inch): 7/8"
• Installation Hole Size (inch): 1-3/8"

*Includes two silicone gaskets

316 Stainless Steel Alloy Flush Mount Fuel Vent - Straight Vent

On the exterior, they have a smooth edge over the competition. Unlike some others, there is no protruding cap to cause damage or be damaged by hull bumps and scrapes. Cap unscrews with a hex head wrench for easy cleaning of the filter and pressure testing of the entire fuel system. These vents now include two silicone gaskets.

Features:

• Straight Vent

Specifications:

• Hose Size (inch): 5/8" inner diameter
• Maximum Hull Thickness (inch): 7/8"
• Installation Hole Size (inch): 1-3/8"

*Includes two silicone gaskets

• White LED
  
• Waterproof
  
• Surface mount
  
• Pigtail wire connector

• Ideal for small boats and watercraft
  
• Low-profile, fold-down design keeps cleat clear of dock traffic
  
• Marine-grade aluminum protected with corrosion resistant finish
  
• Easy to install on all dock types
  
• Requires two standard 3/8" carriage bolts (not included)

• Water Resistant
  
• Surface mount design
  
• 12 VDC
  
• Less than 1 Amp draw (35mA)

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Ideal for small boats and watercraft
  
• Low-profile, fold-down design keeps cleat clear of dock traffic
  
• Marine-grade aluminum protected with corrosion resistant finish
  
• Easy to install on all dock types
  
• Requires two standard 3/8" carriage bolts (not included)

• Premium marine grade vinyl
  
• UV protection
  
• 9" diameter
  
• Fluorescent orange color

90° P-Trap Fuel Tank Vent - Black with Stainless Steel Trim Cover

Composite 90-degree P-trap fuel tank vent 66419-3. These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns.  This eliminates the need for an anti-siphon loop in the vent hose.  

Features:

• For 5/8" I.D. hose
• (inch) 3/4" install. hole size
• (inch) 9/16" max. hull thickness
• Vents air from your boat's fuel tank as you fill the fuel tank
• Splash-resistant, corrosion resistant
• Meets ABYC standard

*Compatible with Ethanol blended fuels

90° P-Trap Fuel Tank Vent - Flush Mount - Black with Stainless Steel Vent Head

This Attwood 90-Degree P-Trap Fuel Tank Vent reliably helps prevent water from entering the fuel tank while still allowing air to vent freely during normal sea conditions and washdowns. This vent’s effectiveness. eliminates the need for an anti-siphon loop in the vent hose. This is a flush mount vent for use with a 5/8-inch interior diameter hose. It requires a 1-3/8-inch installation hole and can be used with a maximum hull thickness of 1 inch.

Features:

• This black vent with a stainless steel vent head meets ABYC standards
• Flush Mount - 5/8" I.D. hose
• (inch) 1-3/8" install. hole size
• (inch) 1" Max. hull thickness

*Compatible with Ethanol blended fuels

Adjustable Heavy-Duty Transom Saver - 24"-36"

Protect your investment with Attwood Transom Savers. A lifted outboard puts hundreds of foot-pounds of pressure on the transom - especially during trailering.

Features:

• Support the cantilevered weight of the motor
• Stabilize engine and steering mechanism when trailering

The Attwood Difference:

• Tough components - You'll get long life from our adjustable toggles with replaceable rubber pads

• Support the cantilevered weight of the motor
  
• Stabilize engine and steering mechanism when trailering

• Tough components - You'll get long life from our adjustable toggles with replaceable rubber pads

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• Robust design provides easy, single-handed cam-lock operation
  
• Built to last in harsh marine environments
  
• Provides 2-mile, 360°, illumination for boats up to 39.4' (12M)
  
• Incandescent All-Round navigation light engine
  
• Shock, corrosion-and water-proof electronics
  
• Durable, anodized aluminum pole
  
• Anti-glare lens preserves night vision
  
• USCG certified
  
• Assembled with Attwood's LightArmor™ bases

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

All-Round Deck Mount Light

The Deck Mount Light has 7-inch leads for connection to a 12V DC power supply. Also, the bayonet lock secures the lens and cover to the base, providing easy lamp replacement. Light mounts flush, making it ideal for installation atop the tow piece on ski or wakeboard boat towers.

Features:

• Includes a 9W wedge base lamp
• Installs directly to deck with two required #10 fasteners
• Deck mount  
• Black

*Does not have a raised base 

Anchor Lift System

This convenient system drops the anchor at the turn of a button and stores it in the anchor mount housing when not in use. Constructed of heavy gauge steel with durable powder coated finish and mounts on the bow or stern corners of most boats.

Anchor secures within anchor mount housing. Mounts easily to bow or stern. Deploy anchor with the simple twist of a knob.

Includes:

• Anchor Mount/Rope Guide Assembly 
• Anchor Rope Reel Assembly
• Rear Pulley, Rear Pulley Axel

Other Features:

• Anchor deploys and lifts smoothly and securely.  
• Easy installation with detailed instructions.
• Multiple mounting solutions
• Anchor stows conveniently in anchor mount housing

*Anchor, rope, and mounting hardware not included.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

ATO/ATC Fuse Holder

Watertight, extra heavy duty and weatherproof. For use with fuses up to 30 Amps. 12 gauge wire leads for easy hook-ups. Fuse not included.

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• 36" Wire
  
• 12V & 24V
  
• CE Rated

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• 36" Wire
  
• 12V and 24V
  
• CE Rated
  
• Includes Cover

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• For use where a bailing device is required
  
• Integrated handle is easy to grip
  
• Includes a water tight lid and functions as a dry storage container

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• LED status indicators
  
• 1.5 amp
  
• 12V
  
• 1 bank operation

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

• 12V
  
• 15 Amp
  
• 36" Wire
  
• 5-Year Warranty

Blue LED Micro Light with Stainless Steel Bezel & Vertical Mount

This Attwood LED Micro Light is a compact and versatile light source that can be installed in numerous locations. Each one delivers industry-leading light output from an extremely compact package. The electropolished stainless steel cover adds an appealing bright finish to a boat, and this light is durable with its fully sealed electronics. It will endure and perform in the harshest conditions, and it can be used in locations such as rod storage boxes without risk of water damage. It can also be mounted under a hardtop or to a rail. 

Features:

•  0.66-watt draw at 12 volts DC
• Blue LEDs
• Rated for 50,000+ hours of use

Braided Nylon Rope - 3/16" x 100' - White

The strongest rope manufactured, nylon can absorb sudden shock loads that would break ropes of other fibers.This ability allows this product to be widely used in the marine industry for both anchor lines and dock lines. Made from tenacity, multifilament nylon fiber which is light and heat stabilized, nylon rope is resistant to rot, oils, gasoline, grease, marine growth and most chemicals.

Solid braided nylon offers a rope that has is strong round cord that will not flatten out which stay's flexible throughout it's life and have a soft hand.