2-Rung Aluminum Ladder Jack (each)
|
The easy-to-use 12036 scaffold bracket offers convenience for residential or commercial roofing projects. It is installed over wall sheathing just below the eave height on one or all four sides of a structure to create a safe, convenient walkway for erection of roof trusses, plywood, shingles, fascia, gutters, and under-eave covering. It includes a 3/16 inches sway brace for right or left hand use and a 5/8 inches safety bolt and clip. It also comes in a 48 inches model.
|
4 Gallon Pour Can
|
The easy-to-use 12048 scaffold bracket offers convenience for residential or commercial roofing projects. It is installed over wall sheathing just below the eave height on one or all four sides of a structure to create a safe, convenient walkway for erection of roof trusses, plywood, shingles, fascia, gutters, and under-eave covering. It includes a 3/16 inches sway brace for right or left hand use and a 5/8 inches safety bolt and clip. It also comes in a 36 inches model.
|
5 Gallon Bucket
|
7 Gallon Bucket
|
9 Quart Hot Dipper
|
This heavy-duty roof bracket adjusts and locks in six positions and accommodates roof pitches from 3/12 to 10/12. Made of galvanized steel for extra strength, safety, and durability, it is easy to set up, operate, reposition and remove without damaging shingles, and it folds flat for compact storage and transport. Complies with OSHA regulations.
|
Adjustable Roof Bracket 33º /45º /60º /90º 2x8.2x10,2x12 w/ 19 " back
|
Bucket 13 Gallon
|
This 6 ft extension attaches to either Acro's 6 ft or 12 ft chicken ladders (model #'s 11600 & 11120). The sections go together easily and are locked securely with heavy-duty lynch pins. The raised, solid-steel rungs are hand-welded for safety. Extension also comes in 12 ft length (11121).
|
Chicken Ladder - Chicken Ladder Hook
|
Chicken Ladder - Protective Coating Kit
|
Flat Surface Guard Rail System
|
Turns Section Of Extension Ladder Into Climbing Aid on Steep Slope Roofs
|
This lightweight 12 inch aluminum wheel with dual-roller bearings and a grease fitting in a sturdy all-steel frame conveniently converts your ladder into a hoist. Using a 3/4 or 1 inch manila rope, the 79005 lifts up to 300 pounds of supplies to your roof. Its heavy-duty forged swivel hook has a safety latch for added security.
|
The Acro all-steel super chopper is a convenient tool for both homeowners and contractors. It can be used for roof cleanup, ice and mud removal, lawn and garden care, flooring, plaster, drywall compound, and cement dropping removal, barn scraping, and more. It is continuously welded, and its unique design produces an unbendable, lightweight stem. It also features an easily resharpenable 8 inch blade. Its standard length is 54 inches; custom lengths are available as well as model #94100 that has a 6 inch blade.
|
Ladder Accessories - Ladder Scoop.
This new Acro ladder accessory can be used for many roofing and general household maintenance applications: • Can be used as a non slip paint can holder • Holds shingles or siding using one or two Ladder Scoops • Powder Coated Safety Yellow • No special tools required • Can be used with any ladder |
This lightweight 12 inch aluminum wheel with dual-roller bearings and a grease fitting in a sturdy all-steel frame conveniently converts your ladder into a hoist. The 79000 mounts on any two rungs of a ladder and, using a 3/4 or 1 inch manila rope, lifts up to 300 pounds of supplies to your roof. The handle is 24 inches from the ladder mounting point, and it stays in place and won't sway or wobble.
|
Open Edge Guardrail System Bracket & Post
|
With this simple and safe parapet wall guardrail system, workmen do not have to work on the outside of a parapet wall to attach brackets or guardrail posts. This roof bracket comes with a guardrail post holder and the post to hold two 2x4's. The 2x4's, when inserted through the post slots and used in conjunction with a 2x6 toeboard, form a safe, continuous guardrail around the roof edge. It is compliant with OSHA regulations for fall protection, and since the post is always on the inner side of the parapet wall, it meets OSHA's height regulations throughout its use. It is lightweight and easily installed by one person without ladders or scaffolds, and individual units can be moved without complete disassembly of the system. It is the only system in the industry that can adjust to accommodate 4 to 24inch walls with a 3inch adjustment screw.
|
The heavy-duty pigtail safety hook made of 1/2 inch round steel is designed for hauling buckets and materials to the roof. Color blue.
|
Reinforced Ladder Hook with fixed Wheel & swivel bar
|
Replacement Post for Guard Rail Systems 12060,70&90
|
The unique 12070 is the ideal roofing guardrail system. This roof bracket comes with a guardrail post holder and the post to hold two 2x4's. The 2x4's, when inserted through the post slots and used in conjunction with a 2x6 toeboard, form a safe, continuous guardrail around the roof edge for shingle removal or installation. This setup complies with new OSHA standards for fall protection, is easy to install and remove, adjusts to accommodate roof pitches from 6/12 to 16/12, is lightweight and compact for storage, and is yellow in color for safety.
|
This user-friendly, 45 degree angle Roof Bracket is 16-inches long and designed for use with a sound 2x6 plank. It features four offset nail slots (OSHA requires three) that will not allow the bracket to slide up, six long welds for strength, a back stiffening rib to eliminate twists and flexing, smooth edges and rounded corners that will not cut hands or work area, and a welded gusset to endure wear and tear. It is easy to set up, operate, reposition and remove without causing damage to shingles. Easy to see in safety yellow. Other angles and sizes are available.
|
This user-friendly, 60 degree angle Roof Bracket is 16-inches long and designed for use with a sound 2x6 plank. It features four offset nail slots (OSHA requires three) that will not allow the bracket to slide up, six long welds for strength, a back stiffening rib to eliminate twists and flexing, smooth edges and rounded corners that will not cut hands or work area, and a welded gusset to endure wear and tear. It is easy to set up, operate, reposition and remove without causing damage to shingles. Easy to see in safety yellow. Other angles and sizes are available.
|
This user-friendly, 90 degree angle Roof Brackets is 16-inches long and designed for use with a sound 2x4 plank. It features four offset nail slots (OSHA requires three) that will not allow the bracket to slide up, six long welds for strength, a back stiffening rib to eliminate twists and flexing, smooth edges and rounded corners that will not cut hands or work area, and a welded gusset to endure wear and tear. It is easy to set up, operate, reposition and remove without causing damage to shingles. Easy to see in safety yellow. Other angles and sizes are available.
|
This user-friendly, 90 degree angle Roof Bracket is 16-inches long and designed for use with a sound 2x6 plank. It features four offset nail slots (OSHA requires three) that will not allow the bracket to slide up, six long welds for strength, a back stiffening rib to eliminate twists and flexing, smooth edges and rounded corners that will not cut hands or work area, and a welded gusset to endure wear and tear. It is easy to set up, operate, reposition and remove without causing damage to shingles. Easy to see in safety yellow. Other angles and sizes are available.
|
This user-friendly, heavy-duty 45 degree angle Roof Bracket is 19-inches long and designed for use with a sound 2x10 plank. It features four offset nail slots (OSHA requires three) that will not allow the bracket to slide up, six long welds for strength, a back stiffening rib to eliminate twists and flexing, smooth edges and rounded corners that will not cut hands or work area, and a welded gusset to endure wear and tear. It is easy to set up, operate, reposition and remove without causing damage to shingles. Easy to see in safety yellow. Other angles and sizes are available.
|
This user-friendly, heavy-duty 45 degree angle Roof Bracket is 19-inches long and designed for use with a sound 2x6 plank. It features four offset nail slots (OSHA requires three) that will not allow the bracket to slide up, six long welds for strength, a back stiffening rib to eliminate twists and flexing, smooth edges and rounded corners that will not cut hands or work area, and a welded gusset to endure wear and tear. It is easy to set up, operate, reposition and remove without causing damage to shingles. Easy to see in safety yellow. Other angles and sizes are available.
|
|
|
|
|
Copyright © 2009-2024 A part of the Intelastores, Inc. Store Network Site Designed and Maintained by Inline Internet Systems, Inc. |