Flat Free Wheelbarrow Tire with Ribbed Tread, 4.80/4.00-8" / Each

Marathon Industries 4.80/4.00-8" Flat Free Contractor Wheelbarrow Tire

• Ribbed Tread
• 6" Centered Hub
• 5/8" Standard Ball Bearing
• Mounted on a Steel Rim

500 lb. load capacity.

Not for Highway Use

1. Measure the outside tire diameter. To get the tire size, measure the outside diameter of the tire. Sometimes, the overall tire size is written along the sidewall of your tire. Though this won't provide you with information regarding your hub length and bearing size (those are separate measurements), it will help determine which tire size you need. Measuring the tire diameter of the tire will help to confirm that information.
2. Measure the hub length. The hub length is the measurement through the middle of the wheel (or hub) measuring from end point to end point (or bearing to bearing). You'll want to make sure to measure through the center of the wheel and not just the outside as there will be space in your rim that will go unaccounted for. You're trying to determine how much "space" the rim takes up on your axle. If you order a hub length that is too short, the tire will move from side to side on your axle. If you order a hub length that is too long, your rim will extend beyond your axle.
3. Measure the bearing size. The bearing is the metal piece on the end of your hub where your axle goes through. You just need to measure the inside diameter of the hole. To double check accuracy, you can also measure your axle diameter as well to be sure you have the correct size.

This product ships in approximately 2 days
This product is made in US
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer and to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. User Manual PDF