Air Filled Hand Truck Tire, Universal Fit / Each

Marathon Industries Universal Fit Air Filled Hand Truck Tire Don't know what tire size to buy Our Universal Fit Flat Free Hand Truck Tire is designed to fit the majority of hand trucks and other small equipment. Comes standard with a 2.25" Offset Hub and 5/8" Bearings, but also includes a variety of spacers and bushings to meet the hub and axle configuration you need.

300 lb. Load Capacity

30 Max psi - Inflate with Manual Pump Only

Not for Highway Use

1. Measure the outside tire diameter. To get the tire size, measure the outside diameter of the tire. Sometimes, the overall tire size is written along the sidewall of your tire. Though this won't provide you with information regarding your hub length and bearing size (those are separate measurements), it will help determine which tire size you need. Measuring the tire diameter of the tire will help to confirm that information.
2. Measure the hub length. The hub length is the measurement through the middle of the wheel (or hub) measuring from end point to end point (or bearing to bearing). You'll want to make sure to measure through the center of the wheel and not just the outside as there will be space in your rim that will go unaccounted for. You're trying to determine how much "space" the rim takes up on your axle. If you order a hub length that is too short, the tire will move from side to side on your axle. If you order a hub length that is too long, your rim will extend beyond your axle.
3. Measure the bearing size. The bearing is the metal piece on the end of your hub where your axle goes through. You just need to measure the inside diameter of the hole. To double check accuracy, you can also measure your axle diameter as well to be sure you have the correct size.

This product ships in approximately 2 days
User Manual PDF